Hole Making Tools

• Micrograin Carbide
• TiALN Coated for Increased Tool Life
• For General Machining of Steel, Stainless Steel and Cast Iron 
• 3XD
• Without Through Coolant

• Micrograin Carbide
• TiALN Coated for Increased Tool Life
• For General Machining of Steel, Stainless Steel and Cast Iron 
• 5XD
• Without Through Coolant

• Coated carbide
• Tix04 3 layer coating for improved tool life, TiN, AICRSiN & TiSiN
• Excellent performance on steels, stainless steel and cast iron
• Sizes available 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm and 20mm

• For high-speed drilling of Tough Steel, Stainless Steel and Heat-Resistant Alloys
• TiAlN coated for increased tool life
• Optimised Chipbreaker and sharp cutting edge to avoid built up edge
• High Rake angle
• Through coolant
• 5xD jobber drill

• Bright finish body for maximum chip clearance
• Self centring split point above 1.6mm
• TiN coated on working area for longer tool life

Ideal for drilling steel, cast steel-alloyed and non-alloyed, stainless steel, titanium and aluminium. Particularly suited to stainless steel and titanium.

* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5

Features:

• HSS 8% cobalt stub drill
• Suitable for drilling thin materials with portable drills
• Special twist drills for automatic and turret lathes
• Ideal for general drilling in steels and stainless steels

* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5

Osborn HSS 8% cobalt 90 degree HSSE spot drills

Features:

• For high-speed drilling of Steel and Stainless Steel
• ALTiN coated for increased tool life
• Optimised Chipbreaker
• High Rake angle
• Through coolant
• 5xD jobber drill
• Series available up to 8xD in selected sizes

Features:

• For high-speed drilling of Steel and Stainless Steel
• ALTiN coated for increased tool life
• Optimised Chipbreaker
• High Rake angle
• 5xD jobber drill
• Series available up to 8xD in selected sizes

• For high-speed drilling of Steel and Stainless Steel
• ALTiN coated for increased tool life
• Optimised Chipbreaker
• High Rake angle
• 3xD stub drill
• Series available up to 8xD in selected sizes

• For high-speed drilling of Steel and Stainless Steel
• ALTiN coated for increased tool life
• Optimised Chipbreaker
• High Rake angle
• Through coolant
• 3xD stub drill
• Series available up to 8xD in selected sizes

Features:

• Micro grain carbide substrate.
• TiAlN Coated for longer tool life.
• Point angle: 90 degree
• Weldon shank.

For machining steels, stainless steel and cast iron.

• High helix-sharp cutting edges to avoid built-up and to be suitable for high performance drilling.
• Wide flute and stub length-increasing chip removal and reducing vibration and deflection.
• High vanadium HSS-EX material with superior TiN coating - higher speed and feed, longer service life.
• High quality-good surface finishes, high productivity

Designed for drilling in stainless steels, mild steels, aluminium, aluminium alloy, aluminium die cast, copper alloy etc.

Features:

• 8% cobalt
• H8 Tolerance
• Straight Shank Drill
• Point angle 135 Degree
• DIN334
• Long Series

* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5

• Optimised edge design for stable operation with new chip breaker geometry
• Special grades for outer and inner insert for more efficiency by different materials
• Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
• Large chip pocket better for chip removal
• Optimised insert seat and clamping, Less vibration and longer tool life

• Optimised edge design for stable operation with new chip breaker geometry
• Special grades for outer and inner insert for more efficiency by different materials
• Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
• Large chip pocket better for chip removal
• Optimised insert seat and clamping, Less vibration and longer tool life

Please contact us for the offer to be applied

• High helix-sharp cutting edges to avoid built-up and to be suitable for high performance drilling
• Reinforced web and Jobbers length-increasing rigidity and suitable for 4D-5D drilling
• High vanadium HSS-EX material with superior TiN coating - higher speed and feed, longer service life
• High quality-good surface finishes, high productivity and weeding second operation

Designed for 4D-5D drilling in stainless steels, mild steels, aluminium, aluminium alloy, aluminium die cast, copper, copper alloy etc.

Features:

• Micro grain carbide substrate.
• TiAlN Coated for longer tool life.
• Point angle: 60 degree
• Weldon shank

For machining steels, stainless steel and cast iron.

• For high-speed drilling of Steel and Stainless Steel
• ALTiN coated for increased tool life
• Optimised Chipbreaker
• High Rake angle
• Through coolant
• 8xD long series
• Series also available in 3xD and 5xD

• Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
• Large chip pocket better for chip removal
• Optimised insert seat and clamping, Less vibration and longer tool life

• For high-speed drilling of Tough Steel, Stainless Steel and Heat-Resistant Alloys
• TiAlN coated for increased tool life
• Optimised Chipbreaker and sharp cutting edge to avoid built up edge
• High Rake angle
• Through coolant
• 3xD stub drill

The benfits of the 4xD indexable drilling bodies from ZCC-CT are:

• Optimised edge design for stable operation with new chip breaker geometry
• Special grades for outer and inner insert for more efficiency by different materials
• Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
• Large chip pocket better for chip removal
• Optimised insert seat and clamping, Less vibration and longer tool life

Please contact us for the offer to be applied