Lubrication

MTO Runcool Premium Semi-Synthetic Cutting Fluid

• Compatible with most water qualities up to 400ppm calcium carbonate
• Highly resistant to bacterial and fungal degradation
• Excellent corrosion inhibition to ferrous metals
• Chlorine, formaldehyde, nitrite and phenol free formulation for optimum operator acceptability
• Extremely low foaming tendency

Slideway Oil is high quality machine tool lubricants available in various viscosities.

Application

Use as received for the lubrication of slideways at the manufacturers recommended viscosity. Also suitable for use where machines have a combined hydraulic and tableway system, for carriages, guides and headstocks, and as a gearbox oil where the tackiness additives may offer improved oil film strength.

MTO Runsol Whitewater EP Water Soluble Cutting Fluid

• High oil content.
• Exceptional cooling properties.
• Good anti-corrosion inhibition to ferrous metals.
• EP additives ensure good tool cutting and high quality surface finish.
• Boron, formaldehyde, nitrite and phenol free formulation for optimum operator acceptability.

MTO Runcool 431AF Semi-Stynthetic Cutting Fluid 

• Contains specially developed silicone-free anti-foam additives to overcome foaming in high-pressure systems using soft or de-ionised water.
• Forms a translucent micro emulsion in most waters.
• Compatible with most water qualities up to 400ppm calcium carbonate.
• Highly resistant to bacterial and fungal degradation, giving freedom from bad smells or slimy deposits.
• Offers good corrosion inhibition to ferrous metals.
• Good resistance to contact corrosion thus allowing work pieces to be stacked without staining.
• Chlorine, nitrite, phenol and formaldehyde free and based on highly refined mineral oil, thus giving optimum operator acceptability.
• Creates minimal sticky residues that can easily be washed away with water.

• Enhanced lubricity promotes superior metal wetting and improved surface finish on machined parts
• Good workpiece visibility
• Low oil mist levels
• Promotes extended tool life
• Chlorine-free formulation

MTO Runcool Ultra Semi-Synthetic Cutting Fluid

• Outstanding lubricity and extreme pressure properties.
• Based on highly developed synthetic ester technology.
• Chlorine-free.
  • Free from secondary amines, nitrites and phenols for the most stringent health and safety requirements.
• Low staining potential on aluminium and its alloys.
• Widely used for aerospace applications.
• Forms a stable milky emulsion in waters up to 400ppm CaCO3 hardness.
• Outstanding resistance to bacterial and fungal degradation.
• Good rejection of tramp oil.
• Low foaming characteristics, achieved with only silicone free anti-foams.
• Found to be particularly effective in preventing rusting when machining cast iron.

A semi-synthetic medium to hard water high performance coolant.

Benefits

• Outstanding sump life
• Superior corrosion protection
• Multi-metal compatible
• Medium-hard water tolerant
• Extremely hard water tolerant
• Excellent tramp oil rejection
• Low foaming
• Chlorine, biocide free
• High operator acceptance
• Clear running on cast iron
• Non-staining on aluminium alloys

RUNCOOL ECO 2425 is a biocide-free, soft to medium water, high lubricity micro-emulsion coolant. This chlorine free metalworking fluid will perform extremely well on multi-metal applications and is machine tool friendly with extremely low foaming properties

• Synthetic formulation with a high flash point of 2150C, greatly reduces the risk of fire in the event of a tool crash
• The synthetic formulation greatly assists the dispersal of heat away from the machine tool
• Chlorine free EP additive package
• Extended tool life, increased cutting speed and improves productivity
• Compatible for use with yellow metals without staining
• Good workpiece visibility
• Excellent operator acceptability, low misting

• Suitable for a wide range of hydraulic and other industrial applications
• Extensive range of viscosities to meet most requirements
• Benefiting from a fourfold additive treatment which gives anti-wear, anti-oxidation, anti-corrosion and low foaming properties
• Thermally stable in extreme conditions of temperature and load which supports resistance to degradation

Benefits:

• Formulated with specialized biocide and fungicide components to sterilize the coolant system.
• Helps to break down slimy deposits as well as any hard-water soaps which may accumulate.
• Includes an additive package to emulsify separated coolant and tramp oil.
• The addition of corrosion inhibitors offers additional component protection.

* On selected models.

Benefits

• Based on highly effective extreme pressure and lubricity additives to promote ease of cutting and prolong tool life.
• Effective on high alloy steels and can be used on all non-ferrous metals.
• Optimum consistency so that the lubricant clings to the metal surface, even on the highest speed applications.

RUNCUT CASF 10 is an extreme pressure neat cutting oil blended from solvent refined mineral oil using selected additives, affording a high level of lubricity and EP performance.

Suitable for machining a wide range of materials in various applications, including deep hole boring, broaching, H.D. tapping, threading and gear cutting. Arduous operations are overcome using high performance EP package. 

• Enhanced lubricity with high EP 
• Good workpiece visibility
• Improved finish on machine parts
• Low oil mist levels
• Promotes extended tool life 

• Suitable for a wide range of hydraulic and other industrial applications
• Extensive range of viscosities to meet most requirements
• Benefiting from a fourfold additive treatment which gives anti-wear, anti-oxidation, anti-corrosion and low foaming properties
• Thermally stable in extreme conditions of temperature and load which supports resistance to degradation

• Suitable for a wide range of hydraulic and other industrial applications
• Extensive range of viscosities to meet most requirements
• Benefiting from a fourfold additive treatment which gives anti-wear, anti-oxidation, anti-corrosion and low foaming properties
• Thermally stable in extreme conditions of temperature and load which supports resistance to degradation

MTO Runcool ECO 4778 Semi Sytnthetic Cutting Fluid For Soft Water 

• Outstanding sump life
• Superior corrosion protection
• Multi-metal compatible
• Medium – soft water tolerant
• Excellent tramp oil rejection
• Low foaming
• Chlorine, biocide free
• High operator acceptance
• Clear running on cast iron
• Non-staining on aluminium alloys

• Exceptional load-bearing capability.
• Outstanding shear stability prolongs lubricant life and extends long-term component protection.
• Fully compatible with yellow metals, so offering full multi-metal capability.
• Excellent oxidation and thermal stability for cleaner, more reliable operation.
• Provides an extensive range of grades from ISO 68 to ISO 1000 to suit most requirements.

• Exceptional load-bearing capability.
• Outstanding shear stability prolongs lubricant life and extends long-term component protection.
• Fully compatible with yellow metals, so offering full multi-metal capability.
• Excellent oxidation and thermal stability for cleaner, more reliable operation.
• Provides an extensive range of grades from ISO 68 to ISO 1000 to suit most requirements.

• Ideal for use in cleaning baths and parts washers in conjunction with a brush for degreasing automotive and engineering parts
• Suitable for use with all ferrous and non-ferrous metals
• Formulated so that low levels of application ensure optimum cost effectiveness in use
• Fresh pine odour for enhanced operator acceptability

Benefits:

• Fully synthetic grinding fluid.
• Formulated to promote enhanced protection against bacterial and fungal degradation.
• Exceptional cooling properties.
• Good wheel flushing properties.
• Excellent corrosion protection of machine and work pieces.
• Nitrite, phenol and chlorine free.

Benefits:

• Provides short term protection of metal components when stored undercover.
• Easily removed with petroleum spirit.
• Excellent penetration.
• Non-staining.

Benefits:

• In accordance with REACH
• Low Boron content
• Reduced maintenance cost
• Excellent foam properties
• Increase tool life
• Guaranteed surface finish especially on aluminium alloys

• Suitable for drilling, sawing and thread cutting.
• Safe on steels, copper, brass, stainless steel and ceramics.
• Extends tool life.
• High anti weld features.
• Silicone and CFCs Free.
• Reduces heat and improves surface finish.
• Non-drip compound for brush application or dipping small cutting tool.

ROCOL RTD® Compound is a soft paste and is suitable for all metals including hardened steels, titaniums and nimonics, in even the most severe cutting operations.

RTD® Compound is the world leading, hand applied, lubricant for reaming, tapping and drilling and has been the market leader for over 60 years. A must have product for all machine shops, tool-rooms and maintenance departments.