MTO Lubricants

MTO Runcool Premium Semi-Synthetic Cutting Fluid

• Compatible with most water qualities up to 400ppm calcium carbonate
• Highly resistant to bacterial and fungal degradation
• Excellent corrosion inhibition to ferrous metals
• Chlorine, formaldehyde, nitrite and phenol free formulation for optimum operator acceptability
• Extremely low foaming tendency

MTO Runsol Whitewater EP Water Soluble Cutting Fluid

• High oil content.
• Exceptional cooling properties.
• Good anti-corrosion inhibition to ferrous metals.
• EP additives ensure good tool cutting and high quality surface finish.
• Boron, formaldehyde, nitrite and phenol free formulation for optimum operator acceptability.

MTO Runcool 431AF Semi-Stynthetic Cutting Fluid 

• Contains specially developed silicone-free anti-foam additives to overcome foaming in high-pressure systems using soft or de-ionised water.
• Forms a translucent micro emulsion in most waters.
• Compatible with most water qualities up to 400ppm calcium carbonate.
• Highly resistant to bacterial and fungal degradation, giving freedom from bad smells or slimy deposits.
• Offers good corrosion inhibition to ferrous metals.
• Good resistance to contact corrosion thus allowing work pieces to be stacked without staining.
• Chlorine, nitrite, phenol and formaldehyde free and based on highly refined mineral oil, thus giving optimum operator acceptability.
• Creates minimal sticky residues that can easily be washed away with water.

• Enhanced lubricity promotes superior metal wetting and improved surface finish on machined parts
• Good workpiece visibility
• Low oil mist levels
• Promotes extended tool life
• Chlorine-free formulation

MTO Runcool Ultra Semi-Synthetic Cutting Fluid

• Outstanding lubricity and extreme pressure properties.
• Based on highly developed synthetic ester technology.
• Chlorine-free.
  • Free from secondary amines, nitrites and phenols for the most stringent health and safety requirements.
• Low staining potential on aluminium and its alloys.
• Widely used for aerospace applications.
• Forms a stable milky emulsion in waters up to 400ppm CaCO3 hardness.
• Outstanding resistance to bacterial and fungal degradation.
• Good rejection of tramp oil.
• Low foaming characteristics, achieved with only silicone free anti-foams.
• Found to be particularly effective in preventing rusting when machining cast iron.

A semi-synthetic medium to hard water high performance coolant.

Benefits

• Outstanding sump life
• Superior corrosion protection
• Multi-metal compatible
• Medium-hard water tolerant
• Extremely hard water tolerant
• Excellent tramp oil rejection
• Low foaming
• Chlorine, biocide free
• High operator acceptance
• Clear running on cast iron
• Non-staining on aluminium alloys

RUNCOOL ECO 2425 is a biocide-free, soft to medium water, high lubricity micro-emulsion coolant. This chlorine free metalworking fluid will perform extremely well on multi-metal applications and is machine tool friendly with extremely low foaming properties

• Synthetic formulation with a high flash point of 2150C, greatly reduces the risk of fire in the event of a tool crash
• The synthetic formulation greatly assists the dispersal of heat away from the machine tool
• Chlorine free EP additive package
• Extended tool life, increased cutting speed and improves productivity
• Compatible for use with yellow metals without staining
• Good workpiece visibility
• Excellent operator acceptability, low misting

Benefits

• Based on highly effective extreme pressure and lubricity additives to promote ease of cutting and prolong tool life.
• Effective on high alloy steels and can be used on all non-ferrous metals.
• Optimum consistency so that the lubricant clings to the metal surface, even on the highest speed applications.

RUNCUT CASF 10 is an extreme pressure neat cutting oil blended from solvent refined mineral oil using selected additives, affording a high level of lubricity and EP performance.

Suitable for machining a wide range of materials in various applications, including deep hole boring, broaching, H.D. tapping, threading and gear cutting. Arduous operations are overcome using high performance EP package. 

• Enhanced lubricity with high EP 
• Good workpiece visibility
• Improved finish on machine parts
• Low oil mist levels
• Promotes extended tool life 

MTO Runcool ECO 4778 Semi Sytnthetic Cutting Fluid For Soft Water 

• Outstanding sump life
• Superior corrosion protection
• Multi-metal compatible
• Medium – soft water tolerant
• Excellent tramp oil rejection
• Low foaming
• Chlorine, biocide free
• High operator acceptance
• Clear running on cast iron
• Non-staining on aluminium alloys

Benefits:

• Fully synthetic grinding fluid.
• Formulated to promote enhanced protection against bacterial and fungal degradation.
• Exceptional cooling properties.
• Good wheel flushing properties.
• Excellent corrosion protection of machine and work pieces.
• Nitrite, phenol and chlorine free.

• Suitable for drilling, sawing and thread cutting.
• Safe on steels, copper, brass, stainless steel and ceramics.
• Extends tool life.
• High anti weld features.
• Silicone and CFCs Free.
• Reduces heat and improves surface finish.
• Non-drip compound for brush application or dipping small cutting tool.

Runcut CASF 32 Neat Cutting Oil is an extreme pressure neat cutting oil blended from solvent refined mineral oil using selected additives, affording a high level of lubricity and EP performance.

Suitable for machining a wide range of materials in various applications, including broaching, H.D. tapping, threading and gear cutting. Arduous operations are overcome using high performance EP package.

• Enhanced lubricity
• Good workpiece visibility
• Improved finish on machine parts
• Low oil mist levels
• Promotes extended tool life