Category
No. Flutes
Profile
Length
Diameter
Shank Diameter
Cutting Length
Overall Length
Application
Substrate
Deals
Radius
Range
STARKE
STARKE 16mm 4 Flutes Coated Carbide Square End Mills 16x45x16x100
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£72.40 excl. VAT
£86.88 incl. VAT
STARKE 18mm 4 Flutes Coated Carbide Square End Mills 18x45x18x100
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£93.39 excl. VAT
£112.07 incl. VAT
STARKE 14mm 4 Flutes Coated Carbide Square End Mills 14x32x14x100
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£58.39 excl. VAT
£70.07 incl. VAT
STARKE 20mm 4 Flutes Coated Carbide Square End Mills 20x45x20x100
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£116.73 excl. VAT
£140.08 incl. VAT
STÄRKE 16mm 4 Flutes Variable Helix End Mill 16x16x40x100
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£100.43 excl. VAT
£120.52 incl. VAT
STÄRKE 20mm 4 Flutes Variable Helix End Mill 20x20x45x100
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£126.10 excl. VAT
£151.32 incl. VAT
STARKE 16mm 3 Flutes Coated Carbide Square End Mills 16x45x16x100
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£72.40 excl. VAT
£86.88 incl. VAT
STARKE 14mm 3 Flutes Coated Carbide Square End Mills 14x45x14x100
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£58.39 excl. VAT
£70.07 incl. VAT
STARKE 20mm 3 Flutes Coated Carbide Square End Mills 20x45x20x100
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£116.73 excl. VAT
£140.08 incl. VAT
STARKE 18mm 3 Flutes Coated Carbide Square End Mills 18x45x18x100
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£93.39 excl. VAT
£112.07 incl. VAT
STÄRKE 16mm 3 Flutes 45 degree Ali-Cut End Mill 16x16x40x100
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£92.56 excl. VAT
£111.07 incl. VAT
STÄRKE 20mm 3 Flutes 45 degree Ali-Cut End Mill 20x20x40x100
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£126.91 excl. VAT
£152.29 incl. VAT
STARKE 10mm 4 Flute Coated Carbide Long Length Square End Mill 10x40x10x100
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
£32.32 excl. VAT
£38.78 incl. VAT
STARKE 12mm 4 Flute Coated Carbide Long Length Square End Mill 12x45x12x100
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
£44.14 excl. VAT
£52.97 incl. VAT
STÄRKE 16mm 2 Flutes 45 degree Ali-Cut End Mill 16x16x40x100
ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£92.56 excl. VAT
£111.07 incl. VAT
STÄRKE 20mm 2 Flutes 45 degree Ali-Cut End Mill 20x20x40x100
ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£126.91 excl. VAT
£152.29 incl. VAT
STARKE 20mm 2 Flute Ball Nose Coated Carbide Slot Drill 20x40x20x100
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
£116.73 excl. VAT
£140.08 incl. VAT
STARKE 16mm 2 Flute Ball Nose Coated Carbide Slot Drill 16x32x16x100
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
£72.40 excl. VAT
£86.88 incl. VAT
STARKE 18mm 2 Flute Ball Nose Coated Carbide Slot Drill 18x35x18x100
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
£93.39 excl. VAT
£112.07 incl. VAT
STARKE 20mm 2 Flutes Coated Carbide Slot Drill 20x45x20x100
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
£116.73 excl. VAT
£140.08 incl. VAT
STARKE 16mm 2 Flutes Coated Carbide Slot Drill 16x45x16
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
£72.40 excl. VAT
£86.88 incl. VAT
STARKE 14mm 2 Flutes Coated Carbide Slot Drill 14x32x14
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
£58.39 excl. VAT
£70.07 incl. VAT
STARKE 18mm 2 Flutes Coated Carbide Slot Drill 18x45x18
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
£93.39 excl. VAT
£112.07 incl. VAT
STARKE 16mm 4 Flutes Roughing End Mills 16x45x16x100
- Cut up to 55 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 6mm and 20mm
£103.80 excl. VAT
£124.56 incl. VAT