Category
No. Flutes
Profile
Length
Diameter
Shank Diameter
Cutting Length
Overall Length
Application
Substrate
Deals
Radius
STARKE
STARKE 18mm 2 Flute Ball Nose Coated Carbide Slot Drill 18x35x18x100
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
£93.39 excl. VAT
£112.07 incl. VAT
STARKE 20mm 2 Flute Ball Nose Coated Carbide Slot Drill 20x40x20x100
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
£116.73 excl. VAT
£140.08 incl. VAT
STARKE 16mm 2 Flute Ball Nose Coated Carbide Slot Drill 16x32x16x100
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
£72.40 excl. VAT
£86.88 incl. VAT
STARKE 18mm 2 Flutes Coated Carbide Slot Drill 18x45x18
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
£93.39 excl. VAT
£112.07 incl. VAT
STARKE 20mm 2 Flutes Coated Carbide Slot Drill 20x45x20x100
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
£116.73 excl. VAT
£140.08 incl. VAT
STARKE 14mm 2 Flutes Coated Carbide Slot Drill 14x32x14
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
£58.39 excl. VAT
£70.07 incl. VAT
STARKE 16mm 2 Flutes Coated Carbide Slot Drill 16x45x16
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
£72.40 excl. VAT
£86.88 incl. VAT