Category
No. Flutes
Profile
Length
Diameter
Shank Diameter
Cutting Length
Overall Length
Application
Substrate
Deals
STARKE
STARKE 18mm 3 Flutes Coated Carbide Square End Mills 18x45x18x100
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£93.39 excl. VAT
£112.07 incl. VAT
STARKE 20mm 3 Flutes Coated Carbide Square End Mills 20x45x20x100
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£116.73 excl. VAT
£140.08 incl. VAT
STARKE 14mm 3 Flutes Coated Carbide Square End Mills 14x45x14x100
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£58.39 excl. VAT
£70.07 incl. VAT
STARKE 16mm 3 Flutes Coated Carbide Square End Mills 16x45x16x100
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£72.40 excl. VAT
£86.88 incl. VAT
STÄRKE 16mm 3 Flutes 45 degree Ali-Cut End Mill 16x16x40x100
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£92.56 excl. VAT
£111.07 incl. VAT
STÄRKE 20mm 3 Flutes 45 degree Ali-Cut End Mill 20x20x40x100
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£126.91 excl. VAT
£152.29 incl. VAT