Category
No. Flutes
Profile
Length
Application
Diameter
Shank Diameter
Cutting Length
Radius
Overall Length
Length Below Shank
Neck Dia
Substrate
Deals
ZCC-CT
0.5MM RAD HM SERIES 2 FLUTE BALL NOSE END MILL
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£31.91 excl. VAT
£38.29 incl. VAT
£27.12excl. VAT
£32.54incl. VAT
1MM 2 FLUTE BALL NOSE RIB PROCESSING SLOT DRILL
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£22.42 excl. VAT
£26.90 incl. VAT
£19.06excl. VAT
£22.87incl. VAT
1MM 2 FLUTE BALL NOSE LONG NEXK 8MM CUT LENGTH
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£22.42 excl. VAT
£26.90 incl. VAT
£19.06excl. VAT
£22.87incl. VAT
1MM BALL NOSE 2 FLUTE RIB PROCESSING SLOT DRILL
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£22.42 excl. VAT
£26.90 incl. VAT
£19.06excl. VAT
£22.87incl. VAT
1MM 2 FLUTE BALL NOSE LONG NECK 12MM CUT LENGTH
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£22.42 excl. VAT
£26.90 incl. VAT
£19.06excl. VAT
£22.87incl. VAT
1MM 2 FLUTE BALL NOSE RIB PROCESSING SLOT DRILL
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£22.42 excl. VAT
£26.90 incl. VAT
£19.06excl. VAT
£22.87incl. VAT
4MM 4 FLUTE CORNER RADIUS END MILL
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£25.01 excl. VAT
£30.01 incl. VAT
£21.26excl. VAT
£25.51incl. VAT
8MM 4 FLUTE CORNER RADIUS CARBIDE
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£41.38 excl. VAT
£49.66 incl. VAT
£35.17excl. VAT
£42.20incl. VAT
6MM X 0.5MM RAD 4 FLUTE HM END MILL
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£27.02 excl. VAT
£32.42 incl. VAT
£22.97excl. VAT
£27.56incl. VAT
5MM 4 FLUTE CORNER RADIUS END MILL
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£26.24 excl. VAT
£31.49 incl. VAT
£22.30excl. VAT
£26.76incl. VAT
Solid Carbide End Mill Ø 12.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£80.91 excl. VAT
£97.09 incl. VAT
£68.77excl. VAT
£82.52incl. VAT
10MM 4 FLUTE 0.5 RAD HM SERIES
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£62.02 excl. VAT
£74.42 incl. VAT
£52.72excl. VAT
£63.26incl. VAT
HPC- Solid Carbide End Mill Ø 5.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£22.64 excl. VAT
£27.17 incl. VAT
£19.24excl. VAT
£23.09incl. VAT
HPC- Solid Carbide End Mill Ø 8.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£32.58 excl. VAT
£39.10 incl. VAT
£27.69excl. VAT
£33.23incl. VAT
HPC- Solid Carbide End Mill Ø 6.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£22.64 excl. VAT
£27.17 incl. VAT
£19.24excl. VAT
£23.09incl. VAT
HPC- Solid Carbide End Mill Ø 4.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£22.26 excl. VAT
£26.71 incl. VAT
£18.92excl. VAT
£22.70incl. VAT
HPC- Solid Carbide End Mill Ø 12.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£58.18 excl. VAT
£69.82 incl. VAT
£49.45excl. VAT
£59.34incl. VAT
HPC- Solid Carbide End Mill Ø 10.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£46.62 excl. VAT
£55.94 incl. VAT
£39.63excl. VAT
£47.56incl. VAT
HPC- Solid Carbide End Mill Ø 8.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£39.27 excl. VAT
£47.12 incl. VAT
£33.38excl. VAT
£40.06incl. VAT
HPC- Solid Carbide End Mill Ø 6.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£25.03 excl. VAT
£30.04 incl. VAT
£21.28excl. VAT
£25.54incl. VAT
HPC- Solid Carbide End Mill Ø 12.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£71.37 excl. VAT
£85.64 incl. VAT
£60.66excl. VAT
£72.79incl. VAT
HPC- Solid Carbide End Mill Ø 10.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£52.92 excl. VAT
£63.50 incl. VAT
£44.98excl. VAT
£53.98incl. VAT
Solid Carbide End Mill Ø 8.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£57.67 excl. VAT
£69.20 incl. VAT
£49.02excl. VAT
£58.82incl. VAT
10MM HM 4 FLUTE SHORT CUTTING R END MILL/LONG NECK
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£74.44 excl. VAT
£89.33 incl. VAT
£63.27excl. VAT
£75.92incl. VAT