Category
Application
Length
Substrate
Deals
No. Flutes
Profile
Shank Diameter
Diameter
Cutting Length
Length Below Shank
Overall Length
Neck Dia
Radius
ZCC-CT
2.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
2.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
2.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
2.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
2.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
2.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
2.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
Pencil Neck Ball Nose End Mill R=1.25; Z=2; Shaft HA; coated
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.37 excl. VAT
£25.64 incl. VAT
£18.16excl. VAT
£21.79incl. VAT
Pencil Neck Ball Nose End Mill R=1.25; Z=2; Shaft HA; coated
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.37 excl. VAT
£25.64 incl. VAT
£18.16excl. VAT
£21.79incl. VAT
Pencil Neck Ball Nose End Mill R=1.25; Z=2; Shaft HA; coated
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.37 excl. VAT
£25.64 incl. VAT
£18.16excl. VAT
£21.79incl. VAT
Pencil Neck Ball Nose End Mill R=1.25; Z=2; Shaft HA; coated
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.37 excl. VAT
£25.64 incl. VAT
£18.16excl. VAT
£21.79incl. VAT