Category
No. Flutes
Profile
Length
Application
Diameter
Shank Diameter
Cutting Length
Radius
Overall Length
Length Below Shank
Substrate
Deals
ZCC-CT
2MM 2 FLUTE BALL NOSED END MILL LONG SERIES
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£37.36 excl. VAT
£44.83 incl. VAT
£31.76excl. VAT
£38.11incl. VAT
HPC- Solid Carbide End Mill Ø 10.0; Z=4 R=1.0; Shaft HA; coated
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£52.92 excl. VAT
£63.50 incl. VAT
£44.98excl. VAT
£53.98incl. VAT
HPC- Solid Carbide End Mill Ø 12.0; Z=4 R=1.0; Shaft HA; coated
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£71.37 excl. VAT
£85.64 incl. VAT
£60.66excl. VAT
£72.79incl. VAT
HPC- Solid Carbide End Mill Ø 16.0; Z=4 R=1.0; Shaft HA; coated
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£147.80 excl. VAT
£177.36 incl. VAT
£125.63excl. VAT
£150.76incl. VAT
HPC- Solid Carbide End Mill Ø 6.0; Z=4 R=1.0; Shaft HA; coated
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£25.03 excl. VAT
£30.04 incl. VAT
£21.28excl. VAT
£25.54incl. VAT
HPC- Solid Carbide End Mill Ø 8.0; Z=4 R=1.0; Shaft HA; coated
ZCC-CT UM-4RL Series 4 Flute Long Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£39.27 excl. VAT
£47.12 incl. VAT
£33.38excl. VAT
£40.06incl. VAT