Category
Range
Application
Length
Substrate
Deals
No. Flutes
Profile
Shank Diameter
Diameter
Cutting Length
Length Below Shank
Overall Length
Neck Dia
Radius
ZCC-CT
Ball Nose End Mill R=4.0; Z=2; Shaft HA; coated
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£53.17 excl. VAT
£63.80 incl. VAT
£45.19excl. VAT
£54.23incl. VAT
6MM 4 FLUTE HM SERIES END MILL
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£16.66 excl. VAT
£19.99 incl. VAT
£14.16excl. VAT
£16.99incl. VAT
5.5MM HM SERIES 4 FLUTE END MILL
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£16.66 excl. VAT
£19.99 incl. VAT
£14.16excl. VAT
£16.99incl. VAT
4.0MM RAD HM SERIES 2 FLUTE BALL NOSE END MILL
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£42.16 excl. VAT
£50.59 incl. VAT
£35.84excl. VAT
£43.01incl. VAT
6MM 4 FLUTE CORNER RADIUS END MILL
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£27.02 excl. VAT
£32.42 incl. VAT
£22.97excl. VAT
£27.56incl. VAT
6MM X 0.5MM RAD 4 FLUTE HM END MILL
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£27.02 excl. VAT
£32.42 incl. VAT
£22.97excl. VAT
£27.56incl. VAT
Aluminium-Cutter Ø 16.0; Z=2 R=1.0; Shaft HA; uncoated
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£208.54 excl. VAT
£250.25 incl. VAT
£177.26excl. VAT
£212.71incl. VAT
Aluminium-Cutter Ø 16.0; Z=2 R=2.0; Shaft HA; uncoated
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£208.54 excl. VAT
£250.25 incl. VAT
£177.26excl. VAT
£212.71incl. VAT
Aluminium-Cutter Ø 16.0; Z=2 R=3.0; Shaft HA; uncoated
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£208.54 excl. VAT
£250.25 incl. VAT
£177.26excl. VAT
£212.71incl. VAT
Aluminium-Cutter Ø 16.0; Z=2 R=4.0; Shaft HA; uncoated
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£208.54 excl. VAT
£250.25 incl. VAT
£177.26excl. VAT
£212.71incl. VAT
Solid Carbide End Mill Ø 6.0; Z=2; Shaft HA; coated
2 Flute CrN Coated Carbide Aluminium Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
£14.41 excl. VAT
£17.29 incl. VAT
£12.25excl. VAT
£14.70incl. VAT
HPC-Solid Carbide End Mill Z=4 Ø 6; Shaft HA; coated
ZCC-CT VSM 4 Flute High Performance Solid Carbide End Mill
- Solid micrograin carbide
- Variable helix geometry
- ALTiN coated
- Sharp cutting edge designed for HRSA
- Smooth machining with minimal vibration
- One tool for roughing and finishing
- Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
- High metal removal rates
£20.39 excl. VAT
£24.47 incl. VAT
£17.33excl. VAT
£20.80incl. VAT
16MM HM 4 FLUTE END MILL LONG NECK 2MM RADIUS
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£179.86 excl. VAT
£215.83 incl. VAT
£152.88excl. VAT
£183.46incl. VAT
16MM HM 4 FLUTE SHORT CUTTING R END MILL/LONG NECK
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£179.86 excl. VAT
£215.83 incl. VAT
£152.88excl. VAT
£183.46incl. VAT
6.0MM HM SERIES 2 FLUTE END MILL
ZCC-CT HM-2E 2 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£17.15 excl. VAT
£20.58 incl. VAT
£14.58excl. VAT
£17.50incl. VAT
5.5MM HM SERIES 2 FLUTE END MILL
ZCC-CT HM-2E 2 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£17.15 excl. VAT
£20.58 incl. VAT
£14.58excl. VAT
£17.50incl. VAT
Titanium- Solid Carbide End Mill Ø 8; Z=4 R=0.75; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£45.35 excl. VAT
£54.42 incl. VAT
£38.55excl. VAT
£46.26incl. VAT
Titanium- Solid Carbide End Mill Ø 8; Z=4 R=1.0; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£45.35 excl. VAT
£54.42 incl. VAT
£38.55excl. VAT
£46.26incl. VAT
Titanium- Solid Carbide End Mill Ø 8; Z=4 R=0.3; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£45.35 excl. VAT
£54.42 incl. VAT
£38.55excl. VAT
£46.26incl. VAT
Titanium- Solid Carbide End Mill Ø 8; Z=4 R=0.5; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£45.35 excl. VAT
£54.42 incl. VAT
£38.55excl. VAT
£46.26incl. VAT
Titanium- Solid Carbide End Mill Ø 6; Z=4 R=0.5; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£27.02 excl. VAT
£32.42 incl. VAT
£22.97excl. VAT
£27.56incl. VAT
Titanium- Solid Carbide End Mill Ø 6; Z=4 R=1.0; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£27.02 excl. VAT
£32.42 incl. VAT
£22.97excl. VAT
£27.56incl. VAT
Titanium- Solid Carbide End Mill Ø 6; Z=4 R=0.75; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£27.02 excl. VAT
£32.42 incl. VAT
£22.97excl. VAT
£27.56incl. VAT
HPC- Solid Carbide End Mill Ø 16.0; Z=4 R=2.0; Shaft HA; coated
ZCC-CT UM-4RFP Series 4 Flute Short Cutting Edge Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£147.80 excl. VAT
£177.36 incl. VAT
£125.63excl. VAT
£150.76incl. VAT