Category
No. Flutes
Profile
Length
Range
Application
Diameter
Shank Diameter
Cutting Length
Radius
Overall Length
Length Below Shank
Neck Dia
Substrate
Popular Features
Deals
ZCC-CT
Ball Nose End Mill R=6.0; Z=2; Shaft HA; coated
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£85.60 excl. VAT
£102.72 incl. VAT
£72.76excl. VAT
£87.31incl. VAT
6.0MM RAD HM SERIES 2 FLUTE BALL NOSE END MILL
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£70.57 excl. VAT
£84.68 incl. VAT
£59.98excl. VAT
£71.98incl. VAT
Solid Carbide End Mill Ø 12.0; Z=4 R=3.0; Shaft HA; coated
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£80.91 excl. VAT
£97.09 incl. VAT
£68.77excl. VAT
£82.52incl. VAT
HPC- Solid Carbide End Mill Ø 12.0; Z=4 R=3.0; Shaft HA; coated
ZCC-CT UM-4R Series 4 Flute Standard Length Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£58.18 excl. VAT
£69.82 incl. VAT
£49.45excl. VAT
£59.34incl. VAT
12MM X 1MM RADIUS 2 FLUTE LONG LENGTH CARBIDE
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£117.56 excl. VAT
£141.07 incl. VAT
£99.93excl. VAT
£119.92incl. VAT
Aluminium-Cutter Ø 12.0; Z=2 R=2.0; Shaft HA; uncoated
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£117.56 excl. VAT
£141.07 incl. VAT
£99.93excl. VAT
£119.92incl. VAT
Aluminium-Cutter Ø 12.0; Z=2 R=3.0; Shaft HA; uncoated
2 Flute Corner Radius Long Length End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£117.56 excl. VAT
£141.07 incl. VAT
£99.93excl. VAT
£119.92incl. VAT
Solid Carbide End Mill Ø 12.0; Z=2; Shaft HA; coated
2 Flute CrN Coated Carbide Aluminium Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
£51.64 excl. VAT
£61.97 incl. VAT
£43.89excl. VAT
£52.67incl. VAT
12.0MM HM SERIES 2 FLUTE END MILL
ZCC-CT HM-2E 2 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£62.56 excl. VAT
£75.07 incl. VAT
£53.18excl. VAT
£63.82incl. VAT
Aluminium-Cutter Ø 12.0; Z=2 R=2.0; Shaft HA; uncoated
AL-2R 2 Flute Corner Radius End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£92.75 excl. VAT
£111.30 incl. VAT
£78.84excl. VAT
£94.61incl. VAT
Titanium- Solid Carbide End Mill Ø 12; Z=7 R=3.0; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£119.14 excl. VAT
£142.97 incl. VAT
£101.27excl. VAT
£121.52incl. VAT
Titanium- Solid Carbide End Mill Ø 12; Z=7 R=3.0; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£93.89 excl. VAT
£112.67 incl. VAT
£79.81excl. VAT
£95.77incl. VAT
Titanium- Solid Carbide End Mill Ø 12; Z=4 R=3.0; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£97.70 excl. VAT
£117.24 incl. VAT
£83.05excl. VAT
£99.66incl. VAT
Titanium- Solid Carbide End Mill Ø 12; Z=4 R=3.0; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£77.60 excl. VAT
£93.12 incl. VAT
£65.96excl. VAT
£79.15incl. VAT
Aluminium-Cutter Ø 12.0; Z=2 R=3.0; Shaft HA; uncoated
AL-2R 2 Flute Corner Radius End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£92.75 excl. VAT
£111.30 incl. VAT
£78.84excl. VAT
£94.61incl. VAT
12MM X 1MM RADIUS 2 FLUTE LONG LENGTH CARBIDE
AL-2R 2 Flute Corner Radius End Mill for Aluminium
- Newly developed geometry
- New KMD401 diamond like coating for significantly improved tool life
- Wide range of radii available on larger diameters
£92.75 excl. VAT
£111.30 incl. VAT
£78.84excl. VAT
£94.61incl. VAT
HPC- Solid Carbide End Mill Ø 12.0; Z=4 R=3.0; Shaft HA; coated
ZCC-CT VSM 4 Flute High Performance Solid Carbide Corner Radius End Mill
- Solid micrograin carbide
- ALTiN coated
- Wide range of corner radii available
- Variable helix geometry
- Sharp cutting edge designed for HRSA
- Smooth machining with minimal vibration
- One tool for roughing and finishing
- Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
- High metal removal rates
£69.73 excl. VAT
£83.68 incl. VAT
£59.27excl. VAT
£71.12incl. VAT
Solid Carbide End Mill Ø 12.0; Z=2; Shaft HA; coated
- For Machining Up To 55HRC
- Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
- Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
- Diameter Range 3mm - 20mm
- Solid Micrograin Carbide
- PVD Coated Substrate
£52.92 excl. VAT
£63.50 incl. VAT
£44.98excl. VAT
£53.98incl. VAT