Expert advice available from time served engineers.We offer free carriage on all orders over £39 to mainland UK.Chat with us either by phone, online or email.Click to view our current special offers.
  1. Home Page
  2. ZCC-CT
  3. Milling Cutters

Milling Cutters ZCC-CT

ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank

20.0MM HM SERIES 6 FLUTE LONG CUTTING EDGE END MILL

SKU: HM6ELD200KMG555

ZCC-CT HM-6EL 6 Flute End Mill with Long Straight Shank

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
List Price:
£289.24 excl. VAT
£347.09 incl. VAT
Offer Price:
£245.85excl. VAT
£295.02incl. VAT
15% DISCOUNT
Image of product.

Solid Carbide End Mill Ø 3.0; Z=2; Shaft HA; coated

SKU: PM2ELD30KMG405
  • For Machining Up To 55HRC
  • Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
  • Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
  • Diameter Range 3mm - 20mm 
  • Solid Micrograin Carbide
  • PVD Coated Substrate
List Price:
£19.35 excl. VAT
£23.22 incl. VAT
Offer Price:
£16.45excl. VAT
£19.74incl. VAT
15% DISCOUNT
Image of product.

Solid Carbide End Mill Ø 4.0; Z=2; Shaft HA; coated

SKU: PM2ELD40KMG405
  • For Machining Up To 55HRC
  • Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
  • Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
  • Diameter Range 3mm - 20mm 
  • Solid Micrograin Carbide
  • PVD Coated Substrate
List Price:
£19.35 excl. VAT
£23.22 incl. VAT
Offer Price:
£16.45excl. VAT
£19.74incl. VAT
15% DISCOUNT
Image of product.

Solid Carbide End Mill Ø 5.0; Z=2; Shaft HA; coated

SKU: PM2ELD50KMG405
  • For Machining Up To 55HRC
  • Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
  • Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
  • Diameter Range 3mm - 20mm 
  • Solid Micrograin Carbide
  • PVD Coated Substrate
List Price:
£19.35 excl. VAT
£23.22 incl. VAT
Offer Price:
£16.45excl. VAT
£19.74incl. VAT
15% DISCOUNT
Image of product.

Solid Carbide End Mill Ø 6.0; Z=2; Shaft HA; coated

SKU: PM2ELD60KMG405
  • For Machining Up To 55HRC
  • Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
  • Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
  • Diameter Range 3mm - 20mm 
  • Solid Micrograin Carbide
  • PVD Coated Substrate
List Price:
£19.35 excl. VAT
£23.22 incl. VAT
Offer Price:
£16.45excl. VAT
£19.74incl. VAT
15% DISCOUNT