Face Milling Indexable Milling

• Diameter range Ø125 – 315 mm
• For steel, stainless steel, cast iron and non-ferrous metals
• Inserts with eight cutting edges
• Wedge clamping

• Diameter range Ø50 – 160 mm
• For steel, stainless steel, cast iron and non-ferrous metals
• Inserts with eight cutting edges
• Screw clamping

• Diameter range Ø63 – 315 mm
• For steel, stainless steel and cast iron
• Inserts with 16 cutting edges

• Diameter range Ø50 – 315 mm
• For steel, stainless steel and cast iron
• Inserts with ten cutting edges
• Wedge clamping or screw clamping
• Normal and fine pitch

• Diameter range Ø80 – 315 mm
• For cast iron
• Wedge clamping
• Inserts with twelve cutting edges

• Diameter range Ø100 – 400 mm
• For steel, stainless steel and cast iron
• Tangential insert with four cutting edges
• Heavy duty machining for high cutting depths
• Screw clamping

• Diameter range Ø50 – 125 mm
• For steel and cast iron
• Screw clamping

• Diameter range Ø80 – 400 mm
• For steel and cast iron
• Wedge clamping

• Diameter range Ø125 – 315 mm
• For steel, stainless steel and cast iron
• Tangential insert with four cutting edges
• Heavy duty machining for high cutting depths
• Screw clamping

• Diameter range Ø80 – 315 mm
• For steel, stainless steel and cast iron
• Milling cutter with positive, soft cutting geometry
• Wedge clamping

• Diameter range Ø50 – 315 mm
• For steel, stainless steel, cast iron an nonferrous metals
• Screw clamping

• Diameter range Ø50 – 315 mm
• For steel, stainless steel and cast iron
• Tangential insert with four cutting edges
• Screw clamping

• Diameter range Ø50 – 315 mm
• For steel, stainless steel and cast iron
• Tangential insert with four cutting edges
• Screw clamping

• Diameter range Ø50 – 315 mm
• For steel, stainless steel and cast iron
• Tangential insert with four cutting edges
• Screw clamping

ZCC-CT SEET-DF-YBC302 indexable milling inserts for use with the ZCC-CT FMA01, FMA02 and FMB02 indexable face milling bodies.

ZCC-CT SEET-DM-YBC302 indexable milling inserts for use with the ZCC-CT FMA01, FMA02 and FMB02 indexable face milling bodies.

ZCC-CT SEET-CF-YBD152 indexable milling inserts for use with the ZCC-CT FMA01, FMA02 and FMB02 indexable face milling bodies.

ZCC-CT SEET-CM-YBD152 indexable milling inserts for use with the ZCC-CT FMA01, FMA02 and FMB02 indexable face milling bodies.

ZCC-CT SEET-CR-YBD152 indexable milling inserts for use with the ZCC-CT FMA01, FMA02 and FMB02 indexable face milling bodies.

ZCC-CT SEET-DM-YB9320 indexable milling inserts for use with the ZCC-CT FMA01, FMA02 and FMB02 indexable face milling bodies.