Filter by:
Diameter
Shank Diameter
Cutting Length
Overall Length
Radius
Length Below Shank
Chamfer
Neck Dia
Diameter
Shank Diameter
Flute Length
Effective Drill Depth
Shank Length
Overall Length
Category
Application
Range
Brand
No. Flutes
Length
Workholding
Pitch (mm)
Diameter
Overall Length
Flute Length
Shank Diameter
Type
Diameter
Mount Type
Clamping Range
Special Offers
Eco-Mill 4 Flute Coated Carbide General Purpose Milling Cutters
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
Eco-Mill 3 Flute Coated Carbide General Purpose Milling Cutters
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
Ali-Mill 3 Flute 45 Degree Carbide Milling Cutters for Aluminium
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
V60 4 Flute High Performance Variable Helix Milling Cutters
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
Ali-Mill 2 Flute 45 Degree Carbide Milling Cutters for Aluminium
ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
Eco-Mill 2 Flute Coated Carbide Ball Nose Milling Cutters
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
ER32 Standard Type Collets with Max 15 Micron Runout
ER32 standard type 15 micron runout collets, available in diameters from 1mm to 25mm. The standard type, standard accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of standard precision machining applications.
£6.89 excl. VAT
£8.27 incl. VAT
£3.45excl. VAT
£4.14incl. VAT
4 Flute Coated Carbide Long Series General Purpose End Mill (STARKE Eco-Mill)
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
Eco-Drill Solid Carbide Stub Drill for General Machining
- Micrograin Carbide
- TiALN Coated for Increased Tool Life
- For General Machining of Steel, Stainless Steel and Cast Iron
- 3XD
- Without Through Coolant
Eco-Mill 2 Flute Coated Solid Carbide Slot Drill
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm
Eco-Drill Solid Carbide Jobber Drill for General Machining
- Micrograin Carbide
- TiALN Coated for Increased Tool Life
- For General Machining of Steel, Stainless Steel and Cast Iron
- 5XD
- Without Through Coolant
STARKE Coated Carbide 4 Flute Roughing End Mill
- Cut up to 55 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 6mm and 20mm
ER32 Standard Type Collet Set with Max 15 Micron Runout
ER32 standard type collet set with max 15 micron runout - 18 piece standard precision ER collets : 3mm - 20mm in 1mm increments.
£109.03 excl. VAT
£130.84 incl. VAT
£81.77excl. VAT
£98.12incl. VAT
Ali-Mill 3 Flute Long Series carbide Slot Drill for Aluminium (STARKE AL453)
- Suitable for machining aluminium and other non-ferrous materials
- Mirror polishied flutes
- Excellent surface finishe and superior chip removal
- Micrograin carbide
- Hi-helix geometry
- Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm
CNMG Negative Turning Inserts (OKE)
CNMG-OKE carbide turning insert
- Wide range of grades available for different materials
- CVD and PVD coated grades
- Wide range of chipbreakers available for finishing, medium and roughing applications
- CNMG negative geometry
90 Degree Coated Carbide Spot Drills by STARKE
- Coated carbide
- Tix04 3 layer coating for improved tool life, TiN, AICRSiN & TiSiN
- Excellent performance on steels, stainless steel and cast iron
- Sizes available 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm and 20mm
£4.34 excl. VAT
£5.21 incl. VAT
£3.91excl. VAT
£4.69incl. VAT
BT MAS (BT30 / BT40 / BT50) Standard Type Pull Stud
Standard type pull studs (without through coolant) for use with all BT MAS (BT30, BT40 and BT50) spindle tooling systems
2 Flute Long Series carbide Slot Drill for Aluminium (STARKE Ali-Mill)
- Suitable for machining of aluminium and other non-ferrous materials.
- Mirror polished fl utes
- Excellent surface finishes, superior chip removal.
- Micrograin carbide
- Hi-helix geometry
- Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm
ER32 Standard Type Collets with Max 5 Micron Runout
ER32 standard type 5 micron runout collets, available in diameters from 1mm to 25mm. The standard type, ultra-high precision variants of ER collets - the world's most widely used clamping system, used for a wide array of ultra-high precision machining applications.
£12.57 excl. VAT
£15.08 incl. VAT
£6.29excl. VAT
£7.55incl. VAT
DCMT Positive Turning Inserts (OKE)
DCMT-OKE carbide turning insert
- Wide range of grades available for different materials
- CVD and PVD coated grades
- Wide range of chipbreakers available for finishing, medium and roughing applications
- DCMT positive geometry
CCMT Positive Turning Inserts (OKE)
CCMT-OKE carbide turning insert
- Wide range of grades available for different materials
- CVD and PVD coated grades
- Wide range of chipbreakers available for finishing, medium and roughing applications
- CCMT positive geometry
ER16 Standard Collets Type with Max 15 Micron Runout
ER16 standard type 15 micron runout collets, available in diameters from 1mm to 12.5mm. The standard type, standard accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of standard precision machining applications.
£5.69 excl. VAT
£6.83 incl. VAT
£2.85excl. VAT
£3.42incl. VAT
Coated Carbide Metric Coarse Thread Mills BY STARKE
- Solid carbide
- TISIN coated to machine up to 60 HRC
- 2XD minimum flute length
- Standard metric coarse
- Sizes available: M3 to M16
£48.03 excl. VAT
£57.64 incl. VAT
£38.42excl. VAT
£46.10incl. VAT
ER16 Standard Type Collets with Max 5 Micron Runout
ER16 standard type <5 micron runout collets, available in diameters from 1.00mm to 12.5mm. The standard type, ultra-high precision variants of ER collets - the world's most widely used clamping system, used for a wide array of ultra-high precision machining applications.
£11.20 excl. VAT
£13.44 incl. VAT
£5.60excl. VAT
£6.72incl. VAT