Category
Brand
No. Flutes
Profile
Length
Range
Application
Diameter
Shank Diameter
Overall Length
Cutting Length
Radius
Chamfer
Length Below Shank
Neck Dia
Substrate
Special Offers
STARKE 14mm 4 Flutes Coated Carbide Square End Mills 14x32x14x100
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


£58.39 excl. VAT
£70.07 incl. VAT
STARKE 20mm 4 Flutes Coated Carbide Square End Mills 20x45x20x100
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


£116.73 excl. VAT
£140.08 incl. VAT
STARKE 18mm 4 Flutes Coated Carbide Square End Mills 18x45x18x100
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


£93.39 excl. VAT
£112.07 incl. VAT
STARKE 16mm 4 Flutes Coated Carbide Square End Mills 16x45x16x100
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


£72.40 excl. VAT
£86.88 incl. VAT
STÄRKE 16mm 4 Flutes Variable Helix End Mill 16x16x40x100
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£100.43 excl. VAT
£120.52 incl. VAT
STÄRKE 20mm 4 Flutes Variable Helix End Mill 20x20x45x100
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£126.10 excl. VAT
£151.32 incl. VAT
STARKE 10mm 4 Flute Coated Carbide Long Length Square End Mill 10x40x10x100
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
£32.32 excl. VAT
£38.78 incl. VAT
STARKE 12mm 4 Flute Coated Carbide Long Length Square End Mill 12x45x12x100
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
£44.14 excl. VAT
£52.97 incl. VAT
STÄRKE 20mm 4 Flutes Variable Helix End Mill 20x20x45x100
V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
£143.08 excl. VAT
£171.70 incl. VAT
£52.45excl. VAT
£62.94incl. VAT
STÄRKE 16mm 4 Flutes Variable Helix End Mill 16x16x40x100
V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
£101.82 excl. VAT
£122.18 incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 18,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£130.68 excl. VAT
£156.82 incl. VAT
£117.61excl. VAT
£141.13incl. VAT
16MM MASTERMILL-VX
MasterMill VX 178323 Series 4 Flute High Performance End Mill
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£112.29 excl. VAT
£134.75 incl. VAT
£92.67excl. VAT
£111.20incl. VAT
20MM MASTERMILL-VX
MasterMill VX 178323 Series 4 Flute High Performance End Mill
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£173.36 excl. VAT
£208.03 incl. VAT
£143.07excl. VAT
£171.68incl. VAT
16.0MM HM SERIES 4 FLUTE END MILL
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£122.47 excl. VAT
£146.96 incl. VAT
£104.10excl. VAT
£124.92incl. VAT
18.0MM HM SERIES 4 FLUTE END MILL
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£179.70 excl. VAT
£215.64 incl. VAT
£152.75excl. VAT
£183.30incl. VAT
20.0MM HM SERIES 4 FLUTE END MILL
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£195.25 excl. VAT
£234.30 incl. VAT
£165.96excl. VAT
£199.15incl. VAT
16MM X R1.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£131.12 excl. VAT
£157.34 incl. VAT
£108.21excl. VAT
£129.85incl. VAT
20MM X R1.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£201.78 excl. VAT
£242.14 incl. VAT
£166.52excl. VAT
£199.82incl. VAT
16MM X R2.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£131.12 excl. VAT
£157.34 incl. VAT
£108.21excl. VAT
£129.85incl. VAT
16MM X R3.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£131.12 excl. VAT
£157.34 incl. VAT
£108.21excl. VAT
£129.85incl. VAT
20MM X R2.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£201.78 excl. VAT
£242.14 incl. VAT
£166.52excl. VAT
£199.82incl. VAT
20MM X R3.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£201.78 excl. VAT
£242.14 incl. VAT
£166.52excl. VAT
£199.82incl. VAT
16MM X R1.5 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£131.12 excl. VAT
£157.34 incl. VAT
£108.21excl. VAT
£129.85incl. VAT
16MM X R2.5 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£131.12 excl. VAT
£157.34 incl. VAT
£108.21excl. VAT
£129.85incl. VAT