Category
Brand
No. Flutes
Profile
Length
Range
ER Collet Size
Application
Diameter
Shank Diameter
Overall Length
Cutting Length
Radius
Chamfer
Length Below Shank
Neck Dia
Metric/Inch
Taper
Substrate
Diameter
Overall Length
Flute Length
Shank Diameter
Size
Type
A
H
Clamping Range
Dia
b
h
Morse Taper
Thread Form
Geometry
Finish
Diameter
Diameter (mm)
Diameter (inch)
Mount Type
Material
No. Jaws
Jaw Type
Pitch (mm)
Revolving Live Centres
Tool Holding Accessories
Through Coolant
Popular Features
Morse Taper
Accuracy
Diameter
Shank Diameter
Flute Length
Overall Length
Diameter
Shank Diameter
Flute Length
Overall Length
Shank Type
Run Out
Clamping Range
Special Offers
Eco-Mill 4 Flute Coated Carbide General Purpose Milling Cutters
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


Eco-Mill 3 Flute Coated Carbide General Purpose Milling Cutters
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm


Ali-Mill 3 Flute 45 Degree Carbide Milling Cutters for Aluminium
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
V60 4 Flute High Performance Variable Helix Milling Cutters
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
HSC Series 2 Flute Tialn Coated HSS Milling Cutters
- 2 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
HSC Series 3 Flute Tialn Coated HSS Milling Cutters
- 3 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
HSCR Series Tialn Coated Fine Pitch Roughing HSS Milling Cutters
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
Emuge Metric Coarse Spiral Point Multi Tap NT2 Coated Stainless Steel
The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.
- NT2 is oxidised to stop cold welding
- Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
- Attractive price-performance ratio
max. 3 x d1
£16.52 excl. VAT
£19.82 incl. VAT
£13.70excl. VAT
£16.44incl. VAT
Ali-Mill 2 Flute 45 Degree Carbide Milling Cutters for Aluminium
ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£14.24 excl. VAT
£17.09 incl. VAT
£12.10excl. VAT
£14.52incl. VAT
Emuge Metric Coarse Spiral Flute Multi Tap NE2 Coated
The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.
- NE2 is oxidised to stop cold welding
- Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
- Attractive price-performance ratio
max. 2.5 x d1
£16.26 excl. VAT
£19.51 incl. VAT
£14.21excl. VAT
£17.05incl. VAT
ZCC-CT UM-4E Series 4 Flute Variable Helix Milling Cutters
ZCC-CT UM-4E Series 4 Flute Standard Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£15.19 excl. VAT
£18.23 incl. VAT
£12.91excl. VAT
£15.49incl. VAT
HSC Series 4 Flute Tialn Coated HSS Milling Cutters
- 4 flute HSSE end mill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
Eco-Mill 2 Flute Coated Carbide Ball Nose Milling Cutters
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm


ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.37 excl. VAT
£25.64 incl. VAT
£18.16excl. VAT
£21.79incl. VAT
PM75E Series High Performance Powder Metal 4 Flute Milling Cutters
Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£9.32 excl. VAT
£11.18 incl. VAT
£7.92excl. VAT
£9.50incl. VAT
Emuge Metric Coarse Spiral Point Multi Tap GLT-1 Coated Stainless Steel
The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.
- GLT1 is a Multi layered coating which has a hard smooth surface
- Tremendous increase in tool life and superior swarf evacuation
- High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
- Attractive price-performance ratio
max. 3 x d1
£21.00 excl. VAT
£25.20 incl. VAT
£17.42excl. VAT
£20.90incl. VAT
4 Flute Coated Carbide Long Series General Purpose End Mill (STARKE Eco-Mill)
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
Eco-Drill Solid Carbide Stub Drill for General Machining (Starke)
- Micrograin Carbide
- TiALN Coated for Increased Tool Life
- For General Machining of Steel, Stainless Steel and Cast Iron
- 3XD
- Without Through Coolant
Eco-Mill 2 Flute Coated Solid Carbide Slot Drill
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm


Eco-Drill Solid Carbide Jobber Drill for General Machining (Starke)
- Micrograin Carbide
- TiALN Coated for Increased Tool Life
- For General Machining of Steel, Stainless Steel and Cast Iron
- 5XD
- Without Through Coolant
STARKE Coated Carbide 4 Flute Roughing End Mill
- Cut up to 55 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 6mm and 20mm
ER32 Standard Type Collet Set with Max 15 Micron Runout
ER32 standard type collet set with max 15 micron runout - 18 piece standard precision ER collets : 3mm - 20mm in 1mm increments.
£109.03 excl. VAT
£130.84 incl. VAT
£81.77excl. VAT
£98.12incl. VAT
Ali-Mill 3 Flute Long Series carbide Slot Drill for Aluminium (STARKE AL453)
- Suitable for machining aluminium and other non-ferrous materials
- Mirror polishied flutes
- Excellent surface finishe and superior chip removal
- Micrograin carbide
- Hi-helix geometry
- Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm