Expert advice available from time served engineers.We offer free carriage on all orders over £39 to mainland UK.Chat with us either by phone, online or email.Click to view our current special offers.
  1. Home Page
  2. Special Offers

Special Offers

Image of an E454 series 4 flute end mill milling cutter.

STARKE 2mm 4 Flutes Coated Carbide Square End Mills 2x6x4x50

SKU: E454020

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 25mm
Image indicating the E454 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E454 series end mill manufacturer STARKE.
List Price:
£7.07 excl. VAT
£8.48 incl. VAT
Buy 2 Get 1 FREE
Image of an E453 series 3 flute end mill milling cutter

STARKE 2mm 3 Flutes Coated Carbide Square End Mills 2x6x4x50

SKU: E453020

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 20mm
Image indicating the E453 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E453 series end mill manufacturer STARKE.
List Price:
£7.07 excl. VAT
£8.48 incl. VAT
Buy 2 Get 1 FREE
STARKE Ali-Mill A453 Series 3 Flute 45 Degree Solid Carbide End Mill for Machining Aluminium.

STÄRKE 2mm 3 Flutes 45 degree Ali-Cut End Mill 2x4x6x50

SKU: A453020

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

  • Polished flutes for superior surface finish.
  • The special Hi-Helix geometry enables better chip removal.
  • Micrograin carbide
List Price:
£9.53 excl. VAT
£11.44 incl. VAT
Buy 2 Get 1 FREE
STARKE Ali-Mill A452 Series 2 Flute 45 Degree Solid Carbide End Mill for Machining Aluminium.

STÄRKE 2mm 2 Flutes 45 degree Ali-Cut End Mill 2x4x6x50

SKU: A452020

ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

  • Polished flutes for superior surface finish.
  • The special Hi-Helix geometry enables better chip removal.
  • Micrograin carbide
List Price:
£9.53 excl. VAT
£11.44 incl. VAT
Buy 2 Get 1 FREE
STARKE ECO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill.

STARKE 2mm 2 Flutes Ball Nose Coated Carbide Slot Drill 2x4x4x50

SKU: EB452020

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Available diameter sizes between 1mm and 20mm
Image indicating the EB452 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the EB452 series end mill manufacturer STARKE.
List Price:
£7.07 excl. VAT
£8.48 incl. VAT
Buy 2 Get 1 FREE
STARKE Eco-Mill Coated Carbide 2 Flute End Mill.

STARKE 2mm 2 Flutes Coated Carbide Slot Drill 2x6x4x50

SKU: E452020

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm to 20mm
Image indicating the E452 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E452 series end mill manufacturer STARKE.
List Price:
£7.07 excl. VAT
£8.48 incl. VAT
Buy 2 Get 1 FREE
Image of product.

Alu-Cut carb. end mill äBaseô long type W 2,0 mm

SKU: 2544.002

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

  • Highest metal removal rates for stable milling processes
  • Several corner radii per diameter
  • Center cutting
  • Uncoated
  • Available with high performance GLT coating works in copper alloys in addition to aluminum
  • Rough and finish with 1 tool
List Price:
£29.73 excl. VAT
£35.68 incl. VAT
Offer Price:
£25.97excl. VAT
£31.16incl. VAT
10% DISCOUNT
ZCC-CT NM-2EP 2 Flute CrN Coated Aluminium Rib Processing Micro End Mill

2 FLUTE CrN COATED ALUMINIUM END MILL

SKU: NM2EPD20M16KMG309

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£17.88 excl. VAT
£21.46 incl. VAT
Offer Price:
£15.20excl. VAT
£18.24incl. VAT
15% DISCOUNT
ZCC-CT NM-2EP 2 Flute CrN Coated Aluminium Rib Processing Micro End Mill

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

SKU: NM2EPD20M14KMG309

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£17.88 excl. VAT
£21.46 incl. VAT
Offer Price:
£15.20excl. VAT
£18.24incl. VAT
15% DISCOUNT
ZCC-CT NM-2EP 2 Flute CrN Coated Aluminium Rib Processing Micro End Mill

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

SKU: NM2EPD20M12KMG309

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£17.88 excl. VAT
£21.46 incl. VAT
Offer Price:
£15.20excl. VAT
£18.24incl. VAT
15% DISCOUNT
ZCC-CT NM-2EP 2 Flute CrN Coated Aluminium Rib Processing Micro End Mill

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

SKU: NM2EPD20M10KMG309

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£17.88 excl. VAT
£21.46 incl. VAT
Offer Price:
£15.20excl. VAT
£18.24incl. VAT
15% DISCOUNT
ZCC-CT NM-2EP 2 Flute CrN Coated Aluminium Rib Processing Micro End Mill

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

SKU: NM2EPD20M08KMG309

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£17.88 excl. VAT
£21.46 incl. VAT
Offer Price:
£15.20excl. VAT
£18.24incl. VAT
15% DISCOUNT
ZCC-CT NM-2EP 2 Flute CrN Coated Aluminium Rib Processing Micro End Mill

Solid Carbide End Mill Ø 2.0; Z=2; Shaft HA; coated

SKU: NM2EPD20M06KMG309

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£17.88 excl. VAT
£21.46 incl. VAT
Offer Price:
£15.20excl. VAT
£18.24incl. VAT
15% DISCOUNT

2MM HSS CO8% 3 FLUTE TIALN COATED END MILLS

SKU: HSC3020
  • 3 flute HSSE slot drill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
List Price:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE
ZCC-CT NM-2BP 2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro End Mill

2 FLUTE CrN COATED ALUMINIUM BALL NOSE END MILL

SKU: NM2BPR10M20KMG309

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£19.98 excl. VAT
£23.98 incl. VAT
Offer Price:
£16.98excl. VAT
£20.38incl. VAT
15% DISCOUNT
ZCC-CT NM-2BP 2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro End Mill

2 FLUTE CrN COATED ALUMINIUM BALL NOSE

SKU: NM2BPR10M16KMG309

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£19.71 excl. VAT
£23.65 incl. VAT
Offer Price:
£16.75excl. VAT
£20.10incl. VAT
15% DISCOUNT
ZCC-CT NM-2BP 2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro End Mill

2 FLUTE CrN COATED ALUMINIUM BALL NOSE END MILL

SKU: NM2BPR10M12KMG309

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£19.71 excl. VAT
£23.65 incl. VAT
Offer Price:
£16.75excl. VAT
£20.10incl. VAT
15% DISCOUNT
ZCC-CT NM-2BP 2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro End Mill

Pencil Neck Ball Nose End Mill R=1.0; Z=2; Shaft HA; coated

SKU: NM2BPR10M10KMG309

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£19.71 excl. VAT
£23.65 incl. VAT
Offer Price:
£16.75excl. VAT
£20.10incl. VAT
15% DISCOUNT
ZCC-CT NM-2BP 2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro End Mill

Pencil Neck Ball Nose End Mill R=1.0; Z=2; Shaft HA; coated

SKU: NM2BPR10M08KMG309

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£19.71 excl. VAT
£23.65 incl. VAT
Offer Price:
£16.75excl. VAT
£20.10incl. VAT
15% DISCOUNT
ZCC-CT NM-2BP 2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro End Mill

Pencil Neck Ball Nose End Mill R=1.0; Z=2; Shaft HA; coated

SKU: NM2BPR10M06KMG309

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
List Price:
£19.71 excl. VAT
£23.65 incl. VAT
Offer Price:
£16.75excl. VAT
£20.10incl. VAT
15% DISCOUNT
Alu-XP 135303 Series 1 Flute Slot Drill for Machining Aluminium

2MM SINGLE FLUTE ALU-XP CARBIDE UP-CUT

SKU: 1353030200

1 Flute ALU-XP Slot Drill for Machining Aluminium and Non-Ferrous Materials. Micro Grain Carbide End Mill with High Helix Geometry for Excellent surface finishes and Superior Chip Removal.

List Price:
£11.20 excl. VAT
£13.44 incl. VAT
Offer Price:
£9.25excl. VAT
£11.10incl. VAT
15% DISCOUNT
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining

2MM 2 FLUTE BALL NOSED END MILL LONG SERIES

SKU: HM2BLR10KMG555

ZCC-CT 2 Flute Long Length Ball Nose Slot Drill 

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
List Price:
£37.36 excl. VAT
£44.83 incl. VAT
Offer Price:
£31.76excl. VAT
£38.11incl. VAT
15% DISCOUNT
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank

2.0MM HM SERIES 4 FLUTE END MILL

SKU: HM4ED20KMG555

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels

  • Excellent tool design covers large chip pocket, good stability and machining efficiency
  • Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
  • Ultra fine grain carbide
  • KMG555 Nano-ALTiN coating base for hard machining at high temperatures
  • For machining upto 68HRC
List Price:
£14.24 excl. VAT
£17.09 incl. VAT
Offer Price:
£12.10excl. VAT
£14.52incl. VAT
15% DISCOUNT

2MM HSS CO8% 4 FLUTE TIALN COATED END MILLS

SKU: HSC4020
  • 4 flute HSSE end mill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
List Price:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE