Special Offers

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 25mm

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 25mm

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.
• Replaces the V554 series. Now has an improved coating to machine to a higher HRC.

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.
• Replaces the V554 series. Now has an improved coating to machine to a higher HRC.

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.
• Replaces the V554 series. Now has an improved coating to machine to a higher HRC.

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.
• Replaces the V554 series. Now has an improved coating to machine to a higher HRC.

V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.

V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.

V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.

V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.

FRANKEN 4 Flute Long Length High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

FRANKEN 4 Flute Long Length High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

FRANKEN 4 Flute Long Length High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

FRANKEN 4 Flute Long Length High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA

Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

MasterMill VX 178323 Series 4 Flute High Performance End Mill

• Solid micrograin carbide
• Chamfered for corner protection
• Minimized tool deflection
• Reduced tool vibration
• Multi layer VX coating
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy

MasterMill VX 178323 Series 4 Flute High Performance End Mill

• Solid micrograin carbide
• Chamfered for corner protection
• Minimized tool deflection
• Reduced tool vibration
• Multi layer VX coating
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy

MasterMill VX 178323 Series 4 Flute High Performance End Mill

• Solid micrograin carbide
• Chamfered for corner protection
• Minimized tool deflection
• Reduced tool vibration
• Multi layer VX coating
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy

MasterMill VX 178323 Series 4 Flute High Performance End Mill

• Solid micrograin carbide
• Chamfered for corner protection
• Minimized tool deflection
• Reduced tool vibration
• Multi layer VX coating
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC