Diameter
Shank Diameter
Cutting Length
Overall Length
Radius
Length Below Shank
Chamfer
Neck Dia
Category
Application
Range
Brand
No. Flutes
Profile
Length
Substrate
Special Offers
Eco-Mill 4 Flute Coated Carbide General Purpose Milling Cutters
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
V60 4 Flute High Performance Variable Helix Milling Cutters
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
V55 4 Flute High Performance Variable Helix Milling Cutters
V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
20MM HSS CO8% 4 FLUTE TIALN COATED ROUGHING FINE PITCH
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£58.12 excl. VAT
£69.74 incl. VAT
18MM HSS CO8% 4 FLUTE TIALN COATED ROUGHING FINE PITCH
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£53.38 excl. VAT
£64.06 incl. VAT
10MM HSS CO8% 4 FLUTE TIALN COATED ROUGHING FINE PITCH
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£26.14 excl. VAT
£31.37 incl. VAT
16MM HSS CO8% 4 FLUTE TIALN COATED ROUGHING FINE PITCH
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£45.64 excl. VAT
£54.77 incl. VAT
14MM HSS CO8% 4 FLUTE TIALN COATED ROUGHING FINE PITCH
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£39.80 excl. VAT
£47.76 incl. VAT
12MM HSS CO8% 4 FLUTE TIALN COATED ROUGHING FINE PITCH
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£34.23 excl. VAT
£41.08 incl. VAT
PM75S Series High Performance Powder Metal Fine Pitch Ripper
Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£19.59 excl. VAT
£23.51 incl. VAT
£16.65excl. VAT
£19.98incl. VAT
12.0mm x 0.5mm C/RAD PM75S ROUGHER
Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£30.90 excl. VAT
£37.08 incl. VAT
£26.27excl. VAT
£31.52incl. VAT
10.0mm x 0.5mm C/RAD PM75S ROUGHER
Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£25.20 excl. VAT
£30.24 incl. VAT
£21.42excl. VAT
£25.70incl. VAT
8.0mm x 0.5mm C/RAD PM75S ROUGHER
Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£22.21 excl. VAT
£26.65 incl. VAT
£18.88excl. VAT
£22.66incl. VAT
6.0mm x 0.5mm C/RAD PM75S ROUGHER
Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£19.59 excl. VAT
£23.51 incl. VAT
£16.65excl. VAT
£19.98incl. VAT
PM75E Series High Performance Powder Metal 4 Flute Milling Cutters
Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£9.32 excl. VAT
£11.18 incl. VAT
£7.92excl. VAT
£9.50incl. VAT
MasterMill VX Series 4 Flute High Performance End Mill
MasterMill VX 178323 Series 4 Flute High Performance End Mill
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£13.56 excl. VAT
£16.27 incl. VAT
£11.19excl. VAT
£13.43incl. VAT
ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£14.24 excl. VAT
£17.09 incl. VAT
£12.10excl. VAT
£14.52incl. VAT
HSC Series 4 Flute Tialn Coated HSS Milling Cutters
- 4 flute HSSE end mill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
25MM 45DEG L/S 8FLT PULSAR BLUE
Pulsar Blue 6 & 8 Flute Long End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£446.79 excl. VAT
£536.15 incl. VAT
£368.70excl. VAT
£442.44incl. VAT
20MM 45DEG L/S 8FLT PULSAR BLUE
Pulsar Blue 6 & 8 Flute Long End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£251.62 excl. VAT
£301.94 incl. VAT
£207.66excl. VAT
£249.19incl. VAT
Pulsar Blue 6 & 8 Flute 45 Degree Helix Long Series End Mill for Hardened Steel
Pulsar Blue 6 & 8 Flute Long End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£39.30 excl. VAT
£47.16 incl. VAT
£32.44excl. VAT
£38.93incl. VAT
18MM 45DEG L/S 8FLT PULSAR BLUE
Pulsar Blue 6 & 8 Flute Long End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£200.97 excl. VAT
£241.16 incl. VAT
£165.84excl. VAT
£199.01incl. VAT
MasterMill VX Series 4 Flute Corner Radius High Performance End Mill
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£25.57 excl. VAT
£30.68 incl. VAT
£21.10excl. VAT
£25.32incl. VAT
Pulsar Blue 4 Flute Extended Neck End Mill for Hardened Steel
Pulsar Blue 4 Flute Extended Neck End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£31.42 excl. VAT
£37.70 incl. VAT
£25.93excl. VAT
£31.12incl. VAT