Category
Brand
No. Flutes
Profile
Length
Range
Application
Diameter
Shank Diameter
Overall Length
Cutting Length
Radius
Chamfer
Length Below Shank
Neck Dia
Substrate
Special Offers
STARKE 5mm 4 Flutes Coated Carbide Square End Mills 5x13x6x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


£8.34 excl. VAT
£10.01 incl. VAT
STARKE 6mm 4 Flutes Coated Carbide Square End Mills 6x16x6x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


£9.18 excl. VAT
£11.02 incl. VAT
STÄRKE 3mm 4 Flutes Variable Helix End Mill 3x6x8x50
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£18.44 excl. VAT
£22.13 incl. VAT
STÄRKE 4mm 4 Flutes Variable Helix End Mill 4x4x10x50
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£18.44 excl. VAT
£22.13 incl. VAT
STÄRKE 5mm 4 Flutes Variable Helix End Mill 5x6x12x50
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£18.44 excl. VAT
£22.13 incl. VAT
STÄRKE 6mm 4 Flutes Variable Helix End Mill 6x6x16x50
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£18.44 excl. VAT
£22.13 incl. VAT
STARKE 5mm 3 Flutes Coated Carbide Square End Mills 5x13x6x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm


£8.34 excl. VAT
£10.01 incl. VAT
STARKE 6mm 3 Flutes Coated Carbide Square End Mills 6x18x6x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm


£9.18 excl. VAT
£11.02 incl. VAT
STÄRKE 5mm 3 Flutes 45 degree Ali-Cut End Mill 5x6x13x50
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£13.39 excl. VAT
£16.07 incl. VAT
STÄRKE 6mm 3 Flutes 45 degree Ali-Cut End Mill 6x6x18x50
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£13.39 excl. VAT
£16.07 incl. VAT
STARKE 6mm 4 Flute Coated Carbide Long Length Square End Mill 6x25x6x75
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
£12.39 excl. VAT
£14.87 incl. VAT
STÄRKE 5mm 2 Flutes 45 degree Ali-Cut End Mill 5x6x13x50
ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£13.39 excl. VAT
£16.07 incl. VAT
STÄRKE 6mm 2 Flutes 45 degree Ali-Cut End Mill 6x6x15x50
ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£13.39 excl. VAT
£16.07 incl. VAT
STARKE 5mm 2 Flutes Coated Carbide Slot Drill 5x13x6x50
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm


£8.34 excl. VAT
£10.01 incl. VAT
STARKE 6mm 2 Flutes Coated Carbide Slot Drill 6x16x6x50
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm


£9.18 excl. VAT
£11.02 incl. VAT
STÄRKE 4mm 4 Flutes Variable Helix End Mill 4x6x11x50
V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
£16.73 excl. VAT
£20.08 incl. VAT
£7.30excl. VAT
£8.76incl. VAT
STÄRKE 3mm 4 Flutes Variable Helix End Mill 3x6x8x50
V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
£17.18 excl. VAT
£20.62 incl. VAT
£6.26excl. VAT
£7.51incl. VAT
STÄRKE 5mm 4 Flutes Variable Helix End Mill 5x6x13x50
V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
£16.73 excl. VAT
£20.08 incl. VAT
STÄRKE 6mm 4 Flutes Variable Helix End Mill 6x6x16x50
V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
£16.73 excl. VAT
£20.08 incl. VAT
Alu-Cut carb. end mill äBaseô long type W 2,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£29.73 excl. VAT
£35.68 incl. VAT
£26.76excl. VAT
£32.11incl. VAT
Alu-Cut carb. end mill äBaseô long type W 3,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£32.80 excl. VAT
£39.36 incl. VAT
£29.52excl. VAT
£35.42incl. VAT
Alu-Cut carb. end mill äBaseô long type W 4,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£32.80 excl. VAT
£39.36 incl. VAT
£29.52excl. VAT
£35.42incl. VAT
Alu-Cut carb. end mill äBaseô long type W 5,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£32.80 excl. VAT
£39.36 incl. VAT
£29.52excl. VAT
£35.42incl. VAT
Alu-Cut carb. end mill äBaseô long type W 6,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£34.54 excl. VAT
£41.45 incl. VAT
£31.09excl. VAT
£37.31incl. VAT