Category
Brand
No. Flutes
Profile
Length
Range
Application
Diameter
Shank Diameter
Overall Length
Cutting Length
Radius
Chamfer
Length Below Shank
Neck Dia
Substrate
Special Offers
STARKE 8mm 4 Flutes Coated Carbide Square End Mills 8x20x8x60
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


£15.89 excl. VAT
£19.07 incl. VAT
STÄRKE 8mm 4 Flutes Variable Helix End Mill 8x8x20x60
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£27.45 excl. VAT
£32.94 incl. VAT
STARKE 8mm 3 Flutes Coated Carbide Square End Mills 8x24x8x60
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm


£15.89 excl. VAT
£19.07 incl. VAT
STÄRKE 8mm 3 Flutes 45 degree Ali-Cut End Mill 8x8x20x60
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£21.59 excl. VAT
£25.91 incl. VAT
STARKE 8mm 4 Flute Coated Carbide Long Length Square End Mill 8x25x8x75
- Micrograin Carbide
- TIALN coated to machine up to 45 HRC
- Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
- Centre cutting
- Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
£21.45 excl. VAT
£25.74 incl. VAT
STÄRKE 8mm 2 Flutes 45 degree Ali-Cut End Mill 8x8x20x60
ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£21.59 excl. VAT
£25.91 incl. VAT
STARKE 8mm 2 Flutes Coated Carbide Slot Drill 8x20x8x60
ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm to 20mm


£15.89 excl. VAT
£19.07 incl. VAT
STÄRKE 8mm 4 Flutes Variable Helix End Mill 8x8x20x60
V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
£24.90 excl. VAT
£29.88 incl. VAT
Alu-Cut carb. end mill äBaseô long type W 8,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£43.39 excl. VAT
£52.07 incl. VAT
£39.05excl. VAT
£46.86incl. VAT
8mm x 110mm OAL ALU-XP 3FL 45DEG
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£49.43 excl. VAT
£59.32 incl. VAT
£40.79excl. VAT
£48.95incl. VAT
8MM CARB 3FL 45 DEG X/LS ALU-XP
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£37.62 excl. VAT
£45.14 incl. VAT
£31.04excl. VAT
£37.25incl. VAT
8mm x 95mm OAL ALU-XP 3FL 45DEG
Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£40.08 excl. VAT
£48.10 incl. VAT
£33.07excl. VAT
£39.68incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 8,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£36.68 excl. VAT
£44.02 incl. VAT
£33.01excl. VAT
£39.61incl. VAT
TOP-CUT HM end mill "ENORM" long TypN TIALN 7,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£36.68 excl. VAT
£44.02 incl. VAT
£33.01excl. VAT
£39.61incl. VAT
8MM SINGLE FLUTE ALU-XP CARBIDE
1 Flute ALU-XP Slot Drill for Machining Aluminium and Non-Ferrous Materials. Micro Grain Carbide End Mill with High Helix Geometry for Excellent surface finishes and Superior Chip Removal.
£34.69 excl. VAT
£41.63 incl. VAT
£28.63excl. VAT
£34.36incl. VAT
8MM HM 4 FLUTE END MILL STRAIGHT SHANK
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£30.34 excl. VAT
£36.41 incl. VAT
£25.79excl. VAT
£30.95incl. VAT
7.0MM HM SERIES 4 FLUTE END MILL
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£30.34 excl. VAT
£36.41 incl. VAT
£25.79excl. VAT
£30.95incl. VAT
8MM 45DEG L/S 6FLT PULSAR BLUE
Pulsar Blue 6 & 8 Flute Long End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£49.34 excl. VAT
£59.21 incl. VAT
£40.72excl. VAT
£48.86incl. VAT
8MM CARB 3FL 45 DEG ALU-XP
Alu-XP 3 Flute 45 Degree Carbide End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£25.08 excl. VAT
£30.10 incl. VAT
£20.69excl. VAT
£24.83incl. VAT
8MM 4 FLUTE PULSAR BLUE
Pulsar Blue 4 Flute Extended Neck End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£40.51 excl. VAT
£48.61 incl. VAT
£33.42excl. VAT
£40.10incl. VAT
Alu-Cut carb. end mill „Base“ long type W GLT 8,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- GLT coated for improved tool life, works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£54.91 excl. VAT
£65.89 incl. VAT
£49.42excl. VAT
£59.30incl. VAT
HPC- Solid Carbide End Mill Ø 8.0; Z=4; Shaft HA; coated
ZCC-CT UM-4EFP Series 4 Flute Short Cutting Edge AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£35.45 excl. VAT
£42.54 incl. VAT
£30.13excl. VAT
£36.16incl. VAT
Carbide end mill TOP-CUT long typeN TIALN 7,0 mm
FRANKEN Top-Cut 3 Flute High Performance Long Length End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£33.22 excl. VAT
£39.86 incl. VAT
£29.90excl. VAT
£35.88incl. VAT
Carbide end mill TOP-CUT long typeN TIALN 8,0 mm
FRANKEN Top-Cut 3 Flute High Performance Long Length End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£29.58 excl. VAT
£35.50 incl. VAT
£26.62excl. VAT
£31.94incl. VAT