Special Offers

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 25mm

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 20mm

• Micrograin Carbide
• TIALN coated to machine up to 45 HRC
• Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
• Centre cutting
• Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 1mm and 20mm

• Micrograin Carbide
• TiALN Coated for Increased Tool Life
• For General Machining of Steel, Stainless Steel and Cast Iron 
• 3XD
• Without Through Coolant

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm to 20mm

• Micrograin Carbide
• TiALN Coated for Increased Tool Life
• For General Machining of Steel, Stainless Steel and Cast Iron 
• 5XD
• Without Through Coolant

• Cut up to 55 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 6mm and 20mm

• Solid carbide
• TISIN coated to machine up to 60 HRC
• 2XD minimum flute length
• Standard metric coarse
• Sizes available: M3 to M16

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• NE2 is oxidised to stop cold welding
• Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 2.5 x d1

• 3 & 4 flute HSSE end mill ripper
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• NT2 is oxidised to stop cold welding
• Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 3 x d1

• 3 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

• 4 flute HSSE end mill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.

• GLT1 is a Multi layered coating which has a hard smooth surface
• Tremendous increase in tool life and superior swarf evacuation
• High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
• Attractive price-performance ratio

max. 3 x d1

• 2 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

Clarkson HSS Co8 Long Length Threaded Shank End Mill

• HSS 8% cobalt
• 4-8 flutes
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill

• HSS 8% cobalt
• Uncoated 
• Weldon shank
• Suitable for a wide range of materials

CLARKSON TiALN Coated HSS Co8 Multi Flute Long Length Fine Pitch Ripper

• HSS 8% cobalt
• Fine pitch
• TiALN coated
• Weldon (flatted) shank
• Suitable for a wide range of materials

CLARKSON HSS Co8 2 Flute Threaded Shank Slot Drill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

Clarkson 3 Flute HSS Co8 Short Length End Mill 

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

CLARKSON HSS Co8 Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials