Selected Filters:
Category
Brand
No. Flutes
Profile
Length
Range
Application
Diameter
Shank Diameter
Overall Length
Cutting Length
Radius
Length Below Shank
Neck Dia
Substrate
Special Offers
STARKE 18mm 4 Flutes Coated Carbide Square End Mills 18x45x18x100
SKU: E454180
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm


List Price:
£93.39 excl. VAT
£112.07 incl. VAT
£93.39 excl. VAT
£112.07 incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 18,0 mm
SKU: 1998A.018
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
List Price:
£130.68 excl. VAT
£156.82 incl. VAT
£130.68 excl. VAT
£156.82 incl. VAT
Offer Price:
£117.61excl. VAT
£141.13incl. VAT
£117.61excl. VAT
£141.13incl. VAT
18.0MM HM SERIES 4 FLUTE END MILL
SKU: HM4ED180KMG555
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
List Price:
£179.70 excl. VAT
£215.64 incl. VAT
£179.70 excl. VAT
£215.64 incl. VAT
Offer Price:
£152.75excl. VAT
£183.30incl. VAT
£152.75excl. VAT
£183.30incl. VAT
18MM HSS CO8% 4 FLUTE TIALN COATED END MILLS
SKU: HSC4180
- 4 flute HSSE end mill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
List Price:
£38.23 excl. VAT
£45.88 incl. VAT
£38.23 excl. VAT
£45.88 incl. VAT
HPC- Solid Carbide End Mill Ø 18.0; Z=4; Shaft HA; coated
SKU: UM4ED180KMG405
ZCC-CT UM-4E Series 4 Flute Standard Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
List Price:
£132.92 excl. VAT
£159.50 incl. VAT
£132.92 excl. VAT
£159.50 incl. VAT
Offer Price:
£112.98excl. VAT
£135.58incl. VAT
£112.98excl. VAT
£135.58incl. VAT
Carbide end mill TOP-CUT "ENORM" short typeN TIALN 18,0 mm
SKU: 1916A.018
FRANKEN Top-Cut 4 Flute Short Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
List Price:
£120.92 excl. VAT
£145.10 incl. VAT
£120.92 excl. VAT
£145.10 incl. VAT
Offer Price:
£108.83excl. VAT
£130.60incl. VAT
£108.83excl. VAT
£130.60incl. VAT
Ball Nose End Mill R=9.0; Z=4; Shaft HA; coated
SKU: HM4BLR90KMG555
ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
List Price:
£188.52 excl. VAT
£226.22 incl. VAT
£188.52 excl. VAT
£226.22 incl. VAT
Offer Price:
£160.24excl. VAT
£192.29incl. VAT
£160.24excl. VAT
£192.29incl. VAT
9MM RADIUS HM 4 FLUTE BALL NOSE END MILL STRAIGHT SHANK
SKU: HM4BR90KMG555
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
List Price:
£170.00 excl. VAT
£204.00 incl. VAT
£170.00 excl. VAT
£204.00 incl. VAT
Offer Price:
£144.50excl. VAT
£173.40incl. VAT
£144.50excl. VAT
£173.40incl. VAT