Special Offers

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 25mm

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 20mm

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm to 20mm

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

• Highest metal removal rates for stable milling processes
• Several corner radii per diameter
• Center cutting
• Uncoated
• Available with high performance GLT coating works in copper alloys in addition to aluminum
• Rough and finish with 1 tool

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

• 3 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

1 Flute ALU-XP Slot Drill for Machining Aluminium and Non-Ferrous Materials. Micro Grain Carbide End Mill with High Helix Geometry for Excellent surface finishes and Superior Chip Removal.

• 4 flute HSSE end mill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

• 2 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

• Highest metal removal rates for stable milling processes
• Several corner radii per diameter
• Center cutting
• GLT coated for improved tool life, works in copper alloys in addition to aluminum
• Rough and finish with 1 tool

Alu-XP 2 Flute Carbide Slot Drill for Aluminium 

• Excellent surface finishes.
• Superior chip removal
• Micrograin solid carbide substrate
• Mirror polished Flutes
• Suitable for high speed machining of aluminium and other non-ferrous materials
• Corner protected.

Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill

• HSS 8% cobalt
• Uncoated 
• Weldon shank
• Suitable for a wide range of materials

CLARKSON HSS Co8 2 Flute Threaded Shank Slot Drill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

Clarkson 3 Flute HSS Co8 Short Length End Mill 

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

CLARKSON HSS Co8 Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

Clarkson 4-6 Flute HSS Co8 (Cobalt)  Short Length End Mill 

• HSS 8% cobalt
• Uncoated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

CLARKSON TiALN HSS Co8 2 Flute Short Length Slot Drill

• HSS 8% coablt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials