Range
Brand
No. Flutes
Profile
Length
Application
Diameter
Shank Diameter
Overall Length
Cutting Length
Radius
Chamfer
Length Below Shank
Neck Dia
Substrate
Deals
Milling Tools
Alu-Cut carb. end mill äBaseô long type W 12,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£66.15 excl. VAT
£79.38 incl. VAT
£59.54excl. VAT
£71.45incl. VAT
12MM HSS CO8% 4 FLUTE TIALN COATED ROUGHING FINE PITCH
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£34.23 excl. VAT
£41.08 incl. VAT
12MM HSS CO8% 3 FLUTE TIALN COATED END MILLS
- 3 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£18.26 excl. VAT
£21.91 incl. VAT
14MM HSS CO8% 3 FLUTE TIALN COATED END MILLS
- 3 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£28.29 excl. VAT
£33.95 incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 11,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£66.29 excl. VAT
£79.55 incl. VAT
£59.66excl. VAT
£71.59incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 12,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£59.46 excl. VAT
£71.35 incl. VAT
£53.51excl. VAT
£64.21incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 14,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£79.80 excl. VAT
£95.76 incl. VAT
£71.82excl. VAT
£86.18incl. VAT
14.0mm x 1.0mm C/RAD PM75S ROUGHER
Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£36.96 excl. VAT
£44.35 incl. VAT
£31.42excl. VAT
£37.70incl. VAT
12.0mm x 0.5mm C/RAD PM75S ROUGHER
Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£30.90 excl. VAT
£37.08 incl. VAT
£26.27excl. VAT
£31.52incl. VAT
14.0mm PM75E END MILL
Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£28.51 excl. VAT
£34.21 incl. VAT
£24.23excl. VAT
£29.08incl. VAT
12.0mm PM75E END MILL
Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£23.52 excl. VAT
£28.22 incl. VAT
£19.99excl. VAT
£23.99incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,2 / 12 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£71.64 excl. VAT
£85.97 incl. VAT
£64.48excl. VAT
£77.38incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,5 / 12 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£70.69 excl. VAT
£84.83 incl. VAT
£63.62excl. VAT
£76.34incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 2,0 / 12 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£71.64 excl. VAT
£85.97 incl. VAT
£64.48excl. VAT
£77.38incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 3,0 / 12 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£72.57 excl. VAT
£87.08 incl. VAT
£65.31excl. VAT
£78.37incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 1,0 / 14 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£86.24 excl. VAT
£103.49 incl. VAT
£77.62excl. VAT
£93.14incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 1,0 / 12 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£70.69 excl. VAT
£84.83 incl. VAT
£63.62excl. VAT
£76.34incl. VAT
11.0MM HM SERIES 4 FLUTE END MILL
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£60.77 excl. VAT
£72.92 incl. VAT
£51.65excl. VAT
£61.98incl. VAT
12MM HSS CO8% 4 FLUTE TIALN COATED END MILLS
- 4 flute HSSE end mill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£18.26 excl. VAT
£21.91 incl. VAT
14MM HSS CO8% 4 FLUTE TIALN COATED END MILLS
- 4 flute HSSE end mill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£28.29 excl. VAT
£33.95 incl. VAT
12MM 45DEG L/S 6FLT PULSAR BLUE
Pulsar Blue 6 & 8 Flute Long End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£101.71 excl. VAT
£122.05 incl. VAT
£83.93excl. VAT
£100.72incl. VAT
14MM 45DEG L/S 6FLT PULSAR BLUE
Pulsar Blue 6 & 8 Flute Long End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£127.48 excl. VAT
£152.98 incl. VAT
£105.20excl. VAT
£126.24incl. VAT
12MM HSS CO8% 2 FLUTE TIALN COATED SLOT DRILLS
- 2 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£18.26 excl. VAT
£21.91 incl. VAT
14MM HSS CO8% 2 FLUTE TIALN COATED END MILLS
- 2 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£28.29 excl. VAT
£33.95 incl. VAT