Expert advice available from time served engineers.
Click to view our current special offers.
We offer free carriage on all orders over £39 to mainland UK.
Click to view our current special offers.
Chat with us either by phone, online or email.
Click to view our current special offers.
  1. Home Page
  2. Milling Tools

Milling Tools

Banner image highlighting some of the products in this category.

Milling Cutters »

Indexable Milling »

Image of an E454 series 4 flute end mill milling cutter.

Eco-Mill 4 Flute Coated Carbide General Purpose Milling Cutters

Series: E454

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 25mm
Image indicating the E454 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E454 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
Image of an E453 series 3 flute end mill milling cutter

Eco-Mill 3 Flute Coated Carbide General Purpose Milling Cutters

Series: E453

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm and 20mm
Image indicating the E453 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E453 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
STARKE Ali-Mill A453 Series 3 Flute 45 Degree Solid Carbide End Mill for Machining Aluminium.

Ali-Mill 3 Flute 45 Degree Carbide Milling Cutters for Aluminium

Series: A453

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

  • Polished flutes for superior surface finish.
  • The special Hi-Helix geometry enables better chip removal.
  • Micrograin carbide
Starting From:
£9.08 excl. VAT
£10.90 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
STARKE V55 Mill V554 Series 4 Flute High Performance Variable Helix Solid Carbide End Mill.

V55 4 Flute High Performance Variable Helix Milling Cutters

Series: V554

V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.

  • Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
  • Variable helix angle designed to rough and finish with 1 tool.
  • Chatter free design which allows for increased cutting depths and feed rates.
Starting From:
£16.73 excl. VAT
£20.08 incl. VAT
Clearance
View Products
Image of product.

V60 4 Flute High Performance Variable Helix Milling Cutters

Series: V604

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

  • Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
  • Variable helix angle designed to rough and finish with 1 tool.
  • Chatter free design which allows for increased cutting depths and feed rates.
  • Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
Starting From:
£17.57 excl. VAT
£21.08 incl. VAT
Buy 2 Get 1 FREE
View Products

HSC Series 3 Flute Tialn Coated HSS Milling Cutters

Series: HSC3
  • 3 flute HSSE slot drill
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£10.01 excl. VAT
£12.01 incl. VAT
Buy 2 Get 1 FREE
View Products

HSCR Series Tialn Coated Fine Pitch Roughing HSS Milling Cutters

Series: HSCR
  • 3 & 4 flute HSSE end mill ripper
  • HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
  • 1st choice for economical machining
  • TIALN coated for increased tool life
Starting From:
£21.46 excl. VAT
£25.75 incl. VAT
Buy 2 Get 1 FREE
View Products
STARKE Ali-Mill A452 Series 2 Flute 45 Degree Solid Carbide End Mill for Machining Aluminium.

Ali-Mill 2 Flute 45 Degree Carbide Milling Cutters for Aluminium

Series: A452

ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

  • Polished flutes for superior surface finish.
  • The special Hi-Helix geometry enables better chip removal.
  • Micrograin carbide
Starting From:
£9.08 excl. VAT
£10.90 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
STARKE ECO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill.

Eco-Mill 2 Flute Coated Carbide Ball Nose Milling Cutters

Series: EB452

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Available diameter sizes between 1mm and 20mm
Image indicating the EB452 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the EB452 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
Clarkson PM75 Multiple Helix High Performance Powder Metal Fine Pitch Ripper

PM75S Series High Performance Powder Metal Fine Pitch Ripper

Series: PM75S

Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

  • Multiple helix technology for reduced vibration
  • Excellent performance in unstable machining conditions
  • Higher cutting speed than equivalent HSSCo tools
  • Reduced chatter
  • Improved tool harmonics
  • Exceptional performance in unstable cutting conditions
  • Increased chip flow
Starting From:
£19.01 excl. VAT
£22.81 incl. VAT
Offer Price From:
£16.16excl. VAT
£19.39incl. VAT
15% DISCOUNT
View ProductsCutting Data
Image of a 4 flute long series end mill by STARKE, series EL454.

4 Flute Coated Carbide Long Series General Purpose End Mill (STARKE Eco-Mill)

Series: EL454
  • Micrograin Carbide
  • TIALN coated to machine up to 45 HRC
  • Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
  • Centre cutting
  • Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm
Starting From:
£9.10 excl. VAT
£10.92 incl. VAT
Buy 2 Get 1 FREE
View Products
STARKE Eco-Mill Coated Carbide 2 Flute End Mill.

Eco-Mill 2 Flute Coated Solid Carbide Slot Drill

Series: E452

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

  • Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
  • Cut up to 45 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Centre cutting
  • Available diameter sizes between 1mm to 20mm
Image indicating the E452 series end mill can machine steel, stainless steel, cast iron and aluminium.
Logo of the E452 series end mill manufacturer STARKE.
Starting From:
£6.74 excl. VAT
£8.09 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
Image of product.

STARKE Coated Carbide 4 Flute Roughing End Mill

Series: PR554
  • Cut up to 55 HRC 
  • Can be used wet or dry to increase tool life.
  • Micrograin carbide
  • Available diameter sizes between 6mm and 20mm
Starting From:
£13.73 excl. VAT
£16.48 incl. VAT
Buy 2 Get 1 FREE
View ProductsCutting Data
Image of a 3 flute long series slot drill for aluminium by STARKE, series AL453.

Ali-Mill 3 Flute Long Series carbide Slot Drill for Aluminium (STARKE AL453)

Series: AL453
  • Suitable for machining aluminium and other non-ferrous materials
  • Mirror polishied flutes
  • Excellent surface finishe and superior chip removal
  • Micrograin carbide
  • Hi-helix geometry
  • Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm
Starting From:
£8.50 excl. VAT
£10.20 incl. VAT
Buy 2 Get 1 FREE
View Products
Image of a 2 flute long series end mill for aluminium by STARKE, series AL452

2 Flute Long Series carbide Slot Drill for Aluminium (STARKE Ali-Mill)

Series: AL452
  • Suitable for machining of aluminium and other non-ferrous materials.
  • Mirror polished fl utes
  • Excellent surface finishes, superior chip removal.
  • Micrograin carbide
  • Hi-helix geometry
  • Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm
Starting From:
£8.50 excl. VAT
£10.20 incl. VAT
Buy 2 Get 1 FREE
View Products
Image of product.

Ali-Mill 2 Flute Ball Nosed Solid Carbide for Aluminium

Series: AB382
  • Solid micrograin carbide
  • 38 degree helix geometry enable better chip removal
  • Polished flutes for superior surface finish
  • 2 flutes
Starting From:
£4.20 excl. VAT
£5.04 incl. VAT
Buy 2 Get 1 FREE
View Products
Max-Mill Coated Carbide 4 Flute Roughing End Mill

NANO-MILL Max-Mill JWA Series Coated Carbide 4 Flute Roughing End Mill

Series: JWA**04

Max-Mill Coated Carbide 4 Flute Roughing End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£21.77 excl. VAT
£26.12 incl. VAT
View ProductsCutting Data
Image of product.

FRANKEN Alu-Cut 2544 Series 2 & 3 Flute Long Length End mill

Series: 2544

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

  • Highest metal removal rates for stable milling processes
  • Several corner radii per diameter
  • Center cutting
  • Uncoated
  • Available with high performance GLT coating works in copper alloys in addition to aluminum
  • Rough and finish with 1 tool
Starting From:
£28.86 excl. VAT
£34.63 incl. VAT
Offer Price From:
£25.97excl. VAT
£31.16incl. VAT
10% DISCOUNT
View ProductsCutting Data
Max-Mill Coated Carbide 2 Flute Ball Nose Long Length End Mill.

NANO-MILL Coated Carbide 2 Flute Ball Nose Long Slot Drill

Series: JJB**02

Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill

  • Suitable for steels, stainless steels, inconel and titanium
  • Can be used wet or dry
  • Suitable for machining up to 55 HRC
  • TiALN coated micrograin carbide
Starting From:
£22.29 excl. VAT
£26.75 incl. VAT
View ProductsCutting Data
Image of product.

LNKT Insert For Machining Steel YBM253 (ZCC-CT)

Series: LNKT-GM YBM253

ZCC-CT LNKT-GM-YBM253 indexable milling inserts for use with the ZCC-CT FMD03, FME04, FMP03 and EMP09 indexable face milling bodies.

Starting From:
£6.13 excl. VAT
£7.36 incl. VAT
View Products
ZCC-CT NM-2EP 2 Flute CrN Coated Aluminium Rib Processing Micro End Mill

2 Flute Coated Aluminium Rib Processing Micro Slot Drill

Series: NM-2EP

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
Starting From:
£17.34 excl. VAT
£20.81 incl. VAT
Offer Price From:
£14.74excl. VAT
£17.69incl. VAT
15% DISCOUNT
View ProductsCutting Data
Image of product.

Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium

Series: 144303

Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium 

  • Excellent surface finishes.
  • Superior chip removal
  • Micrograin solid carbide substrate
  • Mirror polished Flutes
  • Suitable for high speed machining of aluminium and other non-ferrous materials
  • Corner protected.
  • Long series
Starting From:
£15.37 excl. VAT
£18.44 incl. VAT
Offer Price From:
£13.06excl. VAT
£15.67incl. VAT
15% DISCOUNT
View ProductsCutting Data
ZCC-CT NM-2BP 2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro End Mill

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

Series: NM-2BP

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

  • For machining of Aluminiums, Copper, Brass and Bronze
  • Excellent sharpness of cutting edge for very good surface quality
  • CrN coating for improved tool life
  • Sizes from 0.5mm-5mm 
Starting From:
£19.71 excl. VAT
£23.65 incl. VAT
Offer Price From:
£16.75excl. VAT
£20.10incl. VAT
15% DISCOUNT
View ProductsCutting Data
Image of product.

FRANKEN 4 Flute Long Length High Performance End Mill

Series: 1998A

FRANKEN 4 Flute Long Length High Performance End Mill 

  • Solid micrograin carbide
  • TiALN coated 
  • Centre cutting
  • Variable helix geometry
  • Rough and finish with 1 tool
  • Chamfered for corner protection 
  • Suitable for steel, stainless steel, cast iron, titanium and HRSA
Starting From:
£22.87 excl. VAT
£27.44 incl. VAT
Offer Price From:
£20.58excl. VAT
£24.70incl. VAT
10% DISCOUNT
View ProductsCutting Data