Range
Brand
No. Flutes
Profile
Length
Application
Diameter
Shank Diameter
Overall Length
Cutting Length
Radius
Chamfer
Length Below Shank
Neck Dia
Substrate
Deals
Milling Tools
STARKE 1mm 4 Flutes Coated Carbide Square End Mills 1x3x4x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 1.5mm 4 Flutes Coated Carbide Square End Mills 1.5x4x4x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 2mm 4 Flutes Coated Carbide Square End Mills 2x6x4x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 2.5mm 4 Flutes Coated Carbide Square End Mills 2.5x7x4x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 3mm 4 Flutes Coated Carbide Square End Mills 3x8x4x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 4mm 4 Flutes Coated Carbide Square End Mills 4x11x4x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£7.91 excl. VAT
£9.49 incl. VAT
STARKE 5mm 4 Flutes Coated Carbide Square End Mills 5x13x6x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£8.34 excl. VAT
£10.01 incl. VAT
STARKE 6mm 4 Flutes Coated Carbide Square End Mills 6x16x6x50
ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 25mm
£9.18 excl. VAT
£11.02 incl. VAT
STÄRKE 3mm 4 Flutes Variable Helix End Mill 3x6x8x50
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£18.44 excl. VAT
£22.13 incl. VAT
STÄRKE 4mm 4 Flutes Variable Helix End Mill 4x4x10x50
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£18.44 excl. VAT
£22.13 incl. VAT
STÄRKE 5mm 4 Flutes Variable Helix End Mill 5x6x12x50
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£18.44 excl. VAT
£22.13 incl. VAT
STÄRKE 6mm 4 Flutes Variable Helix End Mill 6x6x16x50
V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.
- Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
- Variable helix angle designed to rough and finish with 1 tool.
- Chatter free design which allows for increased cutting depths and feed rates.
- Replaces the V554 series. Now has an improved coating to machine to a higher HRC.
£18.44 excl. VAT
£22.13 incl. VAT
STARKE 1mm 3 Flutes Coated Carbide Square End Mills 1x3x4x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 1.5mm 3 Flutes Coated Carbide Square End Mills 1.5x4x4x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 2mm 3 Flutes Coated Carbide Square End Mills 2x6x4x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 2.5mm 3 Flutes Coated Carbide Square End Mills 2.5x7x4x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 3mm 3 Flutes Coated Carbide Square End Mills 3x8x4x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 3mm 3 Flutes Coated Carbide Square End Mills 3x8x3x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£7.07 excl. VAT
£8.48 incl. VAT
STARKE 4mm 3 Flutes Coated Carbide Square End Mills 4x11x4x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£7.91 excl. VAT
£9.49 incl. VAT
STARKE 5mm 3 Flutes Coated Carbide Square End Mills 5x13x6x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£8.34 excl. VAT
£10.01 incl. VAT
STARKE 5mm 3 Flutes Coated Carbide Square End Mills 5x15x5x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£8.34 excl. VAT
£10.01 incl. VAT
STARKE 6mm 3 Flutes Coated Carbide Square End Mills 6x18x6x50
ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£9.18 excl. VAT
£11.02 incl. VAT
STÄRKE 1mm 3 Flutes 45 degree Ali-Cut End Mill 1x4x3x50
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£9.53 excl. VAT
£11.44 incl. VAT
STÄRKE 2mm 3 Flutes 45 degree Ali-Cut End Mill 2x4x6x50
ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.
- Polished flutes for superior surface finish.
- The special Hi-Helix geometry enables better chip removal.
- Micrograin carbide
£9.53 excl. VAT
£11.44 incl. VAT