Range
Brand
No. Flutes
Profile
Length
Application
Diameter
Shank Diameter
Overall Length
Cutting Length
Radius
Chamfer
Length Below Shank
Neck Dia
Substrate
Deals
Milling Tools
Alu-Cut carb. end mill äBaseô long type W 2,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£29.73 excl. VAT
£35.68 incl. VAT
£26.76excl. VAT
£32.11incl. VAT
Alu-Cut carb. end mill äBaseô long type W 3,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£32.80 excl. VAT
£39.36 incl. VAT
£29.52excl. VAT
£35.42incl. VAT
Alu-Cut carb. end mill äBaseô long type W 4,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£32.80 excl. VAT
£39.36 incl. VAT
£29.52excl. VAT
£35.42incl. VAT
Alu-Cut carb. end mill äBaseô long type W 5,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£32.80 excl. VAT
£39.36 incl. VAT
£29.52excl. VAT
£35.42incl. VAT
Alu-Cut carb. end mill äBaseô long type W 6,0 mm
The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.
- Highest metal removal rates for stable milling processes
- Several corner radii per diameter
- Center cutting
- Uncoated
- Available with high performance GLT coating works in copper alloys in addition to aluminum
- Rough and finish with 1 tool
£34.54 excl. VAT
£41.45 incl. VAT
£31.09excl. VAT
£37.31incl. VAT
6MM HSS CO8% 3 FLUTE TIALN COATED ROUGHING FINE PITCH
- 3 & 4 flute HSSE end mill ripper
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£21.46 excl. VAT
£25.75 incl. VAT
5MM HSS CO8% 3 FLUTE TIALN COATED END MILLS
- 3 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£10.01 excl. VAT
£12.01 incl. VAT
6MM HSS CO8% 3 FLUTE TIALN COATED END MILLS
- 3 flute HSSE slot drill
- HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
- 1st choice for economical machining
- TIALN coated for increased tool life
£10.01 excl. VAT
£12.01 incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 3,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£25.84 excl. VAT
£31.01 incl. VAT
£23.26excl. VAT
£27.91incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 4,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£25.45 excl. VAT
£30.54 incl. VAT
£22.91excl. VAT
£27.49incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 5,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£24.49 excl. VAT
£29.39 incl. VAT
£22.04excl. VAT
£26.45incl. VAT
Carbide end mill TOP-CUT "ENORM" long typeN TIALN 6,0 mm
FRANKEN 4 Flute Long Length High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£23.56 excl. VAT
£28.27 incl. VAT
£21.20excl. VAT
£25.44incl. VAT
6.0mm x 0.5mm C/RAD PM75S ROUGHER
Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£19.59 excl. VAT
£23.51 incl. VAT
£16.65excl. VAT
£19.98incl. VAT
5.0mm PM75E END MILL
Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£9.32 excl. VAT
£11.18 incl. VAT
£7.92excl. VAT
£9.50incl. VAT
6.0mm PM75E END MILL
Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.
- Multiple helix technology for reduced vibration
- Excellent performance in unstable machining conditions
- Higher cutting speed than equivalent HSSCo tools
- Reduced chatter
- Improved tool harmonics
- Exceptional performance in unstable cutting conditions
- Increased chip flow
£9.32 excl. VAT
£11.18 incl. VAT
£7.92excl. VAT
£9.50incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,1 / 3 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£32.26 excl. VAT
£38.71 incl. VAT
£29.03excl. VAT
£34.84incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,3 / 3 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£31.32 excl. VAT
£37.58 incl. VAT
£28.19excl. VAT
£33.83incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,5 / 3 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£31.32 excl. VAT
£37.58 incl. VAT
£28.19excl. VAT
£33.83incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,1 / 4 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£31.87 excl. VAT
£38.24 incl. VAT
£28.68excl. VAT
£34.42incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,3 / 4 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£30.93 excl. VAT
£37.12 incl. VAT
£27.84excl. VAT
£33.41incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,4 / 4 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£30.93 excl. VAT
£37.12 incl. VAT
£27.84excl. VAT
£33.41incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,5 / 4 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£30.93 excl. VAT
£37.12 incl. VAT
£27.84excl. VAT
£33.41incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,1 / 5 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£31.32 excl. VAT
£37.58 incl. VAT
£28.19excl. VAT
£33.83incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 0,3 / 5 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£30.54 excl. VAT
£36.65 incl. VAT
£27.49excl. VAT
£32.99incl. VAT