Milling Tools

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 25mm

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.
• Replaces the V554 series. Now has an improved coating to machine to a higher HRC.

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 20mm

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 1mm and 20mm

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm to 20mm

• Cut up to 55 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 6mm and 20mm

V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

1 Flute ALU-XP Slot Drill for Machining Aluminium and Non-Ferrous Materials. Micro Grain Carbide End Mill with High Helix Geometry for Excellent surface finishes and Superior Chip Removal.

1 Flute ALU-XP Slot Drill for Machining Aluminium and Non-Ferrous Materials. Micro Grain Carbide End Mill with High Helix Geometry for Excellent surface finishes and Superior Chip Removal.

MasterMill VX 178323 Series 4 Flute High Performance End Mill

• Solid micrograin carbide
• Chamfered for corner protection
• Minimized tool deflection
• Reduced tool vibration
• Multi layer VX coating
• Variable helix geometry
• Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy