Aluminium & Non-Ferrous Milling Cutters Milling Tools

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 25mm

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 20mm

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 1mm and 20mm

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm to 20mm

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

Alu-XP 2 Flute Carbide Slot Drill for Aluminium 

• Excellent surface finishes.
• Superior chip removal
• Micrograin solid carbide substrate
• Mirror polished Flutes
• Suitable for high speed machining of aluminium and other non-ferrous materials
• Corner protected.

2 Flute CrN Coated Carbide Aluminium Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 1mm-12mm