ZCC-CT

ZCC-CT LNKT-GM-YBM253 indexable milling inserts for use with the ZCC-CT FMD03, FME04, FMP03 and EMP09 indexable face milling bodies.

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

ZCC-CT 2 Flute Long Length Ball Nose Slot Drill 

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

APKT-APM carbide milling insert

• Grade YB9320 is our best performing insert for general purpose milling including heat resistant alloys
• CVD coated
• APM chipbreaker is designed for medium machining
• APKT geometry insert

APKT-APM carbide milling insert

• Grade YBM253 is our best performing insert for milling stainless steel
• CVD coated
• APM chipbreaker is designed for medium machining
• APKT geometry insert

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

APKT-APM carbide milling insert

• Grade YBD152 is our best performing insert for milling cast iron
• CVD coated
• APM chipbreaker is designed for medium machining
• APKT geometry insert

• Diameter range Ø40–250 mm
• For steel, stainless steel, cast iron, nonferrous metals and heat-resistant alloys
• For square-shoulder, slot and plunge milling
• Milling cutter with positive, soft cutting geometry
• Inserts with two cutting edges

ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

ANGX-GM carbide milling insert

• Grade YBM253 is our best performing insert for milling stainless steel
• CVD coated
• GM chipbreaker is designed for medium machining
• ANGX geometry insert

• Diameter range Ø63 – 160 mm
• For steel, stainless steel and cast iron
• Groove widths 4, 5, 6, 7, 8 mm

• Diameter range Ø12 – 63 mm
• For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
• For square shoulder milling, slot milling and ramping 
• Milling cutter with positive, soft cutting geometry
• Inserts with two cutting edges

ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

SNEG-GM carbide milling insert

• Grade YBC302 is our best performing insert for milling steel
• CVD coated
• GM chipbreaker is designed for medium machining
• SNEG geometry insert

ANGX-GM carbide milling insert

• Grade YBG205 is our best performing insert for general purpose milling including heat resistant alloys
• CVD coated
• GM chipbreaker is designed for medium machining
• ANGX geometry insert

ZCC-CT UM-4EFP Series 4 Flute Short Cutting Edge AlCrN Coated High Performance Variable Helix Solid Carbide End Mill

• Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
• Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
• End mills and torus Mills.
• HSC/HPC machining.
• AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.

ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill 

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC

• Diameter range 80mm to 315mm
• For steel, stainless steel and cast iron
• Milling cutter with positive, soft cutting geometry
• Wedge clamping

ZCC-CT APKT-PM-YBM253 indexable milling inserts for use with the ZCC-CT EMP01, EMP02, EMP03, HMP01 and QCH-APKT indexable face milling bodies.

ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC
• Starting at 0.3mm diameter

ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank 

• Excellent tool design covers large chip pocket, good stability and machining efficiency
• Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
• Ultra fine grain carbide
• KMG555 Nano-ALTiN coating base for hard machining at high temperatures
• For machining upto 68HRC