Category
Range
Application
Length
Substrate
Deals
No. Flutes
Profile
Shank Diameter
Diameter
Cutting Length
Length Below Shank
Overall Length
Neck Dia
Radius
ZCC-CT
2.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
3.0MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.18 excl. VAT
£25.42 incl. VAT
£18.00excl. VAT
£21.60incl. VAT
Ball Nose End Mill R=3.0; Z=4; Shaft HA; coated X 60mm O/L
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£31.71 excl. VAT
£38.05 incl. VAT
£26.95excl. VAT
£32.34incl. VAT
6MM HM 4 FLUTE SHORT CUTTING R END MILL / LONG NECK END MILL
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£31.91 excl. VAT
£38.29 incl. VAT
£27.12excl. VAT
£32.54incl. VAT
6MM HM 4 FLUTE SHORT CUTTING R END MILL/LONG NECK
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£31.91 excl. VAT
£38.29 incl. VAT
£27.12excl. VAT
£32.54incl. VAT
HPC- Solid Carbide End Mill Ø 6.0; Z=4 R=0.5; Shaft HA; coated
ZCC-CT UM-4RFP Series 4 Flute Short Cutting Edge Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£25.03 excl. VAT
£30.04 incl. VAT
£21.28excl. VAT
£25.54incl. VAT
HPC- Solid Carbide End Mill Ø 6.0; Z=4 R=1.0; Shaft HA; coated
ZCC-CT UM-4RFP Series 4 Flute Short Cutting Edge Corner Radius AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£25.03 excl. VAT
£30.04 incl. VAT
£21.28excl. VAT
£25.54incl. VAT
Ball Nose End Mill R=3.0; Z=5; Shaft HA; coated
ZCC-CTÕs new TM range of high performance milling cutters for heat resistant super-alloys feature a revolutionary proprietary KMS405 coating for exceptional thermal stability and wear resistance.
£34.01 excl. VAT
£40.81 incl. VAT
£28.91excl. VAT
£34.69incl. VAT