ZCC-CT
CCMT Insert For Machining Steel YBC252 Grade (ZCC-CT)
Series: CCMT-HM YBC252
CCMT-HM carbide turning insert
- Grade YBC252 is our best performing insert for turning steel
- CVD coated
- HM chipbreaker is designed for medium machining
- CCMT positive geometry
- 80° rhombic Insert
Starting From:
£3.54 excl. VAT
£4.25 incl. VAT
£3.54 excl. VAT
£4.25 incl. VAT
ZSD05 5xD Indexable Drilling System
Series: ZSD05
- Optimised edge design for stable operation with new chip breaker geometry
- Special grades for outer and inner insert for more efficiency by different materials
- Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
- Large chip pocket better for chip removal
- Optimised insert seat and clamping, Less vibration and longer tool life
Starting From:
£225.00 excl. VAT
£270.00 incl. VAT
£225.00 excl. VAT
£270.00 incl. VAT
ZCC-CT CCMT-EM Carbide Turning Insert (YBG205 Grade)
Series: CCMT-EM-YBG205
ZCC-CT CCMT-EM Carbide Turning Insert (YBG205 Grade)
Starting From:
£3.50 excl. VAT
£4.20 incl. VAT
£3.50 excl. VAT
£4.20 incl. VAT
.jpg&w=640&q=75)
SCLCR/L 95 Deg. Steel Shank Screw Clamp Boring Bar (CC**)
Series: BB-SCLCR/L
- Screw Clamp System
- Suitable For CC** Style Inserts
- 95 Degree Approach
- Steel Shank
Starting From:
£33.77 excl. VAT
£40.52 incl. VAT
£33.77 excl. VAT
£40.52 incl. VAT
ZCC-CT 5501/5601 60 Degree Solid Carbide Deburring Cutter
Series: 5501/5601-R60
Features:
- Micro grain carbide substrate.
- TiAlN Coated for longer tool life.
- Point angle: 60 degree
- Weldon shank
For machining steels, stainless steel and cast iron.
Starting From:
£12.92 excl. VAT
£15.50 incl. VAT
£12.92 excl. VAT
£15.50 incl. VAT
DCMT Insert For Machining Steel YBC252 Grade (ZCC-CT)
Series: DCMT-HM YBC252
DCMT-HM carbide turning insert
- Grade YBC252 is our best performing insert for turning steel
- CVD coated
- HM chipbreaker is designed for medium machining
- DCMT positive geometry
- 55° rhombic Insert
Starting From:
£3.91 excl. VAT
£4.69 incl. VAT
£3.91 excl. VAT
£4.69 incl. VAT
XSEQ Insert For Machining Steel & Stainless Steel YBG302 (ZCC-CT)
Series: XSEQ YBG302
Starting From:
£8.82 excl. VAT
£10.58 incl. VAT
£8.82 excl. VAT
£10.58 incl. VAT
Indexable Slot Milling Shell for Insert Style XSEQ - ZCC-CT
Series: SMP01-SHELL
- Diameter range Ø63 – 160 mm
- For steel, stainless steel and cast iron
- Groove widths 4, 5, 6, 7, 8 mm
Starting From:
£319.89 excl. VAT
£383.87 incl. VAT
£319.89 excl. VAT
£383.87 incl. VAT
DNMG Insert For Machining Stainless Steel YBM253 (ZCC-CT)
Series: DNMG-EM YBM253
DNMG-EM carbide turning insert
- Grade YBM253 is our best performing insert for turning stainless steel
- CVD coated
- EM chipbreaker is designed for medium machining
- DNMG negative geometry
- 55° rhombic Insert
Starting From:
£7.21 excl. VAT
£8.65 incl. VAT
£7.21 excl. VAT
£8.65 incl. VAT
.jpg&w=640&q=75)
CKJNR/L 93 Deg.Top Clamp Turning Tool Holder (KN**)
Series: TTH-CKJNR/L
- Top Clamp System
- Suitable For KN**
- 93 Degree Approach
Starting From:
£57.75 excl. VAT
£69.30 incl. VAT
£57.75 excl. VAT
£69.30 incl. VAT
90° Indexable End Mill for Insert Style APKT - ZCC-CT
Series: EMP01
- Diameter range Ø12 – 63 mm
- For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
- For square shoulder milling, slot milling and ramping
- Milling cutter with positive, soft cutting geometry
- Inserts with two cutting edges
Starting From:
£49.82 excl. VAT
£59.78 incl. VAT
£49.82 excl. VAT
£59.78 incl. VAT
ZCC-CT 1588SL12C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 12xD Long Series
Series: 1588SL12C
1588SL12C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 12xD long series
- Through coolant
Starting From:
£83.94 excl. VAT
£100.73 incl. VAT
£83.94 excl. VAT
£100.73 incl. VAT
Offer Price From:
£67.15excl. VAT
£80.58incl. VAT
£67.15excl. VAT
£80.58incl. VAT
ZSD03 3xD Indexable Drilling System
Series: ZSD03
- Optimised edge design for stable operation with new chip breaker geometry
- Special grades for outer and inner insert for more efficiency by different materials
- Tool holder with excellent rigidity and special surface coating. For higher feed rate and higher productivity
- Large chip pocket better for chip removal
- Optimised insert seat and clamping, Less vibration and longer tool life
Please contact us for the offer to be applied
Starting From:
£178.51 excl. VAT
£214.21 incl. VAT
£178.51 excl. VAT
£214.21 incl. VAT
ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining
Series: HM-2B
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£28.93 excl. VAT
£34.72 incl. VAT
£28.93 excl. VAT
£34.72 incl. VAT
Offer Price From:
£24.59excl. VAT
£29.51incl. VAT
£24.59excl. VAT
£29.51incl. VAT
DNMG Insert For Machining Heat Resistant Super Alloys YBG205 (ZCC-CT)
Series: DNMG-EM YBG205
DNMG-EM carbide turning insert
- Grade YBG205 is our best performing insert for turning heat-resistant super alloys
- CVD coated
- EM chipbreaker is designed for medium machining
- DNMG negative geometry
- 55° rhombic Insert
Starting From:
£5.88 excl. VAT
£7.06 incl. VAT
£5.88 excl. VAT
£7.06 incl. VAT
CNMG Insert For Machining Steel YBC252 Grade (ZCC-CT)
Series: CNMG-DM YBC252
CNMG-DM carbide turning insert
- Grade YBC152 is our best performing insert for turning steel
- CVD coated
- DM chipbreaker is designed for medium machining
- CNMG negative geometry
- 80° rhombic Insert
Starting From:
£3.74 excl. VAT
£4.49 incl. VAT
£3.74 excl. VAT
£4.49 incl. VAT
SNEG Insert For Machining Stainless YBC302 (ZCC-CT)
Series: SNEG-GM YBC302
SNEG-GM carbide milling insert
- Grade YBC302 is our best performing insert for milling steel
- CVD coated
- GM chipbreaker is designed for medium machining
- SNEG geometry insert
Starting From:
£10.55 excl. VAT
£12.66 incl. VAT
£10.55 excl. VAT
£12.66 incl. VAT
RCKT Insert For Machining Hrsa YB9320 (ZCC-CT)
Series: RCKT-DM YB9320
Starting From:
£5.59 excl. VAT
£6.71 incl. VAT
£5.59 excl. VAT
£6.71 incl. VAT
.jpg&w=640&q=75)
PCLNR/L 95 Deg. Lever Lock Turning Tool Holder (CN**)
Series: TTH-PCLNR/L
- Lever Clamp System
- Suitable for CN** Style Inserts
- 95 Degree Approach
Starting From:
£41.13 excl. VAT
£49.36 incl. VAT
£41.13 excl. VAT
£49.36 incl. VAT
ANGX Insert For Machining Stainless YBG205 (ZCC-CT)
Series: ANGX-GM YBG205
ANGX-GM carbide milling insert
- Grade YBG205 is our best performing insert for general purpose milling including heat resistant alloys
- CVD coated
- GM chipbreaker is designed for medium machining
- ANGX geometry insert
Starting From:
£8.75 excl. VAT
£10.50 incl. VAT
£8.75 excl. VAT
£10.50 incl. VAT
ZCC-CT UM-4EFP 4 Flute Short Cutting Edge Variable Helix End Mill
Series: UM-4EFP
ZCC-CT UM-4EFP Series 4 Flute Short Cutting Edge AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
Starting From:
£22.36 excl. VAT
£26.83 incl. VAT
£22.36 excl. VAT
£26.83 incl. VAT
Offer Price From:
£19.01excl. VAT
£22.81incl. VAT
£19.01excl. VAT
£22.81incl. VAT
ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters
Series: HM-2BP
ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£21.37 excl. VAT
£25.64 incl. VAT
£21.37 excl. VAT
£25.64 incl. VAT
Offer Price From:
£18.16excl. VAT
£21.79incl. VAT
£18.16excl. VAT
£21.79incl. VAT
Solid Coated Carbide Through Coolant Twist Drill 8XD ZCC-CT
Series: 1538SU08C
- For high-speed drilling of Steel and Stainless Steel
- ALTiN coated for increased tool life
- Optimised Chipbreaker
- High Rake angle
- Through coolant
- 8xD long series
- Series also available in 3xD and 5xD
Starting From:
£61.33 excl. VAT
£73.60 incl. VAT
£61.33 excl. VAT
£73.60 incl. VAT
Offer Price From:
£49.06excl. VAT
£58.87incl. VAT
£49.06excl. VAT
£58.87incl. VAT
.jpg&w=640&q=75)
SCLCR/L 95 Deg Carbide Through Coolant Boring Bar (CC**)
Series: BB-SCLCR/L-E
- Carbide Shank
- Screw Clamp System
- Through Coolant
- Suitable For CC** Style Inserts
- 95 Degree Aproach
Starting From:
£77.53 excl. VAT
£93.04 incl. VAT
£77.53 excl. VAT
£93.04 incl. VAT