Expert advice available from time served engineers.We offer free carriage on all orders over £39 to mainland UK.Chat with us either by phone, online or email.Click to view our current special offers.
  1. Home Page
  2. ZCC-CT
  3. Indexable Milling
Filter by:

Range

ISO Code

Holder (Body) / Insert

ZCC-CT Indexable Milling

Banner image highlighting some of the products in this category.
Image of product.

90° Indexable End Mill for Insert Style APKT - ZCC-CT

Series: EMP01
  • Diameter range Ø12 – 63 mm
  • For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
  • For square shoulder milling, slot milling and ramping 
  • Milling cutter with positive, soft cutting geometry
  • Inserts with two cutting edges
Starting From:
£49.82 excl. VAT
£59.78 incl. VAT
View ProductsCutting Data
Image of product.

90° Indexable End Mill for Insert Style APKT - ZCC-CT

Series: EMP01-WELDON
  • Diameter range Ø12 – 63 mm
  • For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
  • For square shoulder milling, slot milling and ramping
  • Milling cutter with positive, soft cutting geometry
  • Inserts with two cutting edges
  • Weldon shank
Starting From:
£49.82 excl. VAT
£59.78 incl. VAT
View ProductsCutting Data
Image of product.

90° Indexable Face Mill for Insert Style APKT - ZCC-CT

Series: EMP02
  • Diameter range Ø40–250 mm
  • For steel, stainless steel, cast iron, nonferrous metals and heat-resistant alloys
  • For square-shoulder, slot and plunge milling
  • Milling cutter with positive, soft cutting geometry
  • Inserts with two cutting edges
Starting From:
£139.51 excl. VAT
£167.41 incl. VAT
View ProductsCutting Data
Image of product.

90° Indexable End Mill with Weldon Shank for Insert Style ANGX - ZCC-CT

Series: EMP13-WELDON-END-MILL
  • Diameter range Ø25 – 40 mm
  • For steel, cast iron and non-ferrous metals
  • Double sided, thicker inserts for high stability and deeper cutting depths
  • Inserts with four cutting edges
Starting From:
£101.55 excl. VAT
£121.86 incl. VAT
View ProductsCutting Data
Image of product.

90° Indexable Face Mill for Insert Style ANGX - ZCC-CT

Series: EMP13-FACE-MILL
  • Diameter range Ø40 – 250 mm
  • For steel, cast iron and non-ferrous metals
  • Double sided, thicker inserts for high stability and deeper cutting depths
  • Inserts with four cutting edges
Starting From:
£204.62 excl. VAT
£245.54 incl. VAT
View ProductsCutting Data
Image of product.

45° Face Mill Body for SEET Insert (Fine Pitch) - ZCC-CT

Series: FMA01
  • 45 Degree milling cutter with positive, soft cutting geometry.
  • Ideal for machining steel, stainless steel, cast iron and non ferrous materials.
  • Diameter Range available from 50mm-315mm
  • Wiper inserts available for excellent surface finish
Starting From:
£135.94 excl. VAT
£163.13 incl. VAT
View ProductsCutting Data
Image of product.

90° Indexable Face Mill for Insert Style LNKT - ZCC-CT

Series: EMP09-FACE-MILL
  • Diameter range Ø40 – 125 mm
  • Sharp cutting edge geometry combined with robust tangential inserts
  • First choice for large cutting depths with high feed rates.
  • Specially designed cutting edge with high precision control for high quality 90 degree square shoulder milling
Starting From:
£171.88 excl. VAT
£206.26 incl. VAT
View ProductsCutting Data
Image of product.

45° Face Mill for SEET Inserts (Coarse pitch) - ZCC-CT

Series: FMA02
  • 45 Degree milling cutter with positive, soft cutting geometry.
  • Ideal for machining steel, stainless steel, cast iron and non ferrous materials.
  • Diameter Range available from 50mm-315mm
  • Wiper inserts available for excellent surface finish.
Starting From:
£114.96 excl. VAT
£137.95 incl. VAT
View ProductsCutting Data
Image of product.

45° Face Mill for SE Style Inserts - ZCC-CT

Series: FMA03
  • Diameter range 80mm to 315mm
  • For steel, stainless steel and cast iron
  • Milling cutter with positive, soft cutting geometry
  • Wedge clamping
Starting From:
£255.46 excl. VAT
£306.55 incl. VAT
View ProductsCutting Data
Image of product.

45° Face Mill for Insert Style SNEG - ZCC-CT

Series: FMA11
  • Diameter range Ø63 – 315 mm
  • For steel, stainless steel and cast iron
  • Inserts with eight cutting edges
  • Double sided, thicker inserts for high stability and deeper cutting depths
  • Wiper geometry for good surface quality
  • Normal and fine pitch
Starting From:
£314.77 excl. VAT
£377.72 incl. VAT
View ProductsCutting Data
Image of product.

Indexable End Mill for Insert Style RCKT & RCGX - ZCC-CT

Series: FMR01
  • Diameter range Ø25 – 63 mm
  • For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
  • Screw clamping
Starting From:
£72.99 excl. VAT
£87.59 incl. VAT
View ProductsCutting Data
Image of product.

Indexable Face Mill for Insert Styles RCGX, RCKT & RCMW - ZCC-CT

Series: FMR02
  • Diameter range Ø50 – 250 mm
  • For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
  • Screw clamping
Starting From:
£149.74 excl. VAT
£179.69 incl. VAT
View ProductsCutting Data
Image of product.

Indexable End Mill for Insert Style RD - ZCC-CT

Series: FMR03
  • Diameter range Ø15 – 50 mm
  • For steel, stainless steel and cast iron
  • Screw clamping
  • Mould and die industry
Starting From:
£72.99 excl. VAT
£87.59 incl. VAT
View ProductsCutting Data
Image of product.

Indexable End Mill for Insert Style RDKW - ZCC-CT

Series: FMR03-RDKW
  • Diameter range Ø15 – 50 mm
  • For steel, stainless steel and cast iron
  • Screw clamping
  • Mould and die industry
Starting From:
£68.83 excl. VAT
£82.60 incl. VAT
View ProductsCutting Data
Image of product.

Indexable Face Mill for Insert Style RD - ZCC-CT

Series: FMR04
  • Diameter range Ø50 – 200 mm
  • For steel, stainless steel and cast iron
  • Screw clamping
  • Mould and die industry
Starting From:
£140.44 excl. VAT
£168.53 incl. VAT
View ProductsCutting Data
Image of product.

Indexable Face Mill for Insert Style RDKW - ZCC-CT

Series: FMR04-RDKW
  • Diameter range Ø42 – 200 mm
  • For steel, stainless steel and cast iron
  • Screw clamping
  • Mould and die industry
Starting From:
£132.07 excl. VAT
£158.48 incl. VAT
View ProductsCutting Data

APKT Indexable Milling Insert for Finishing Grade YBC302 (ZCC-CT)

Series: APKT-PF YBC302

APKT-PF carbide milling insert

  • Grade YBC302 is our best performing insert for milling steel
  • CVD coated
  • PF chipbreaker is designed for finishing
  • APKT geometry insert
Starting From:
£8.21 excl. VAT
£9.85 incl. VAT
View Products

APKT Indexable Milling Insert for Medium Machining Grade YBC302 (ZCC-CT)

Series: APKT-PM YBC302

APKT-PM carbide milling insert

  • Grade YBC302 is our best performing insert for milling steel
  • CVD coated
  • PM chipbreaker is designed for medium machining
  • APKT geometry insert
Starting From:
£6.67 excl. VAT
£8.00 incl. VAT
View Products

APKT Indexable Milling Insert for Finishing Grade YBM253 (ZCC-CT)

Series: APKT-APF YBM253

APKT-APF carbide milling insert

  • Grade YBM253 is our best performing insert for milling stainless steel
  • CVD coated
  • APF chipbreaker is designed for finishing
  • APKT geometry insert
Starting From:
£6.52 excl. VAT
£7.82 incl. VAT
View Products

ANGX Indexable Milling Insert for Medium Machining Grade YBC302 (ZCC-CT)

Series: ANGX-GM YBC302

ANGX-GM carbide milling insert

  • Grade YBC302 is our best performing insert for milling steel
  • CVD coated
  • GM chipbreaker is designed for medium machining
  • ANGX geometry insert
Starting From:
£9.02 excl. VAT
£10.82 incl. VAT
View Products

SDMT Indexable Milling Insert for Medium Machining Grade YBC302 (ZCC-CT)

Series: SDMT-PM YBC302

SDMT-PM carbide milling insert

  • Grade YBC302 is our best performing insert for milling steel
  • CVD coated
  • PM chipbreaker is designed for medium machining
  • SDMT geometry insert
Starting From:
£5.55 excl. VAT
£6.66 incl. VAT
View Products

SDMT Indexable Milling Insert for Medium Machining Grade YBD252 (ZCC-CT)

Series: SDMT-PM YBD252

SDMT-PM carbide milling insert

  • Grade YBD252 is our best performing insert for milling cast iron
  • CVD coated
  • PM chipbreaker is designed for medium machining
  • SDMT geometry insert
Starting From:
£5.74 excl. VAT
£6.89 incl. VAT
View Products
Image of product.

45° Face Mill for OFKT05T3 Style Inserts - ZCC-CT

Series: FMA04-OFKT05T3
  • Diameter range Ø125 – 315 mm
  • For steel, stainless steel, cast iron and non-ferrous metals
  • Inserts with eight cutting edges
  • Wedge clamping
Starting From:
£153.28 excl. VAT
£183.94 incl. VAT
View ProductsCutting Data
Image of product.

45° Face Mill for OFKR0704 Style Inserts - ZCC-CT

Series: FMA04-OFKR0704
  • Diameter range Ø125 – 315 mm
  • For steel, stainless steel, cast iron and non-ferrous metals
  • Inserts with eight cutting edges
  • Wedge clamping
Starting From:
£424.25 excl. VAT
£509.10 incl. VAT
View ProductsCutting Data