Diameter
Shank Diameter
Cutting Length
Overall Length
Range
Brand
No. Flutes
Profile
Length
Application
Substrate
Deals
Radius
Length Below Shank
Neck Dia
Popular Features
Hardened Steel Milling Cutters Milling Tools
NANO-MILL Max-Mill JWA Series Coated Carbide 4 Flute Roughing End Mill
Max-Mill Coated Carbide 4 Flute Roughing End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£21.77 excl. VAT
£26.12 incl. VAT
ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters
ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£14.24 excl. VAT
£17.09 incl. VAT
£12.10excl. VAT
£14.52incl. VAT
Pulsar Blue 4 Flute Extended Neck End Mill for Hardened Steel
Pulsar Blue 4 Flute Extended Neck End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£31.42 excl. VAT
£37.70 incl. VAT
£25.93excl. VAT
£31.12incl. VAT
ZCC-CT HM-4R 4 Flute Corner Radius End Mill for Hardened Steel
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£25.01 excl. VAT
£30.01 incl. VAT
£21.26excl. VAT
£25.51incl. VAT
ZCC-CT HM-4EL 4 Flute Long Length Series for Hardened Steel
ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£22.52 excl. VAT
£27.02 incl. VAT
£19.14excl. VAT
£22.97incl. VAT
Max-Mill TiAlN Coated Carbide 4 Flute Long Length Milling Cutters
- Solid Micrograin Carbide
- TiALN coated
- Suitable for machining upto 55HRC
- Can be used for wet and dry cutting
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£15.23 excl. VAT
£18.28 incl. VAT
Pulsar Blue 4 Flute High Feed Corner Radius End Mill for Hardened Steel
Pulsar Blue 4 Flute High Feed Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- Corner radius
- High speed cutting
- High feed geometry
- Short flute for maximum strength
£34.51 excl. VAT
£41.41 incl. VAT
£28.48excl. VAT
£34.18incl. VAT
Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel
Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£23.12 excl. VAT
£27.74 incl. VAT
£19.07excl. VAT
£22.88incl. VAT
Pulsar Blue 4 Flute Extended Neck Corner Radius Long Length End Mill for Hardened Steel
Pulsar Blue 4 Flute Extended Neck Corner Radius Long Length End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£36.94 excl. VAT
£44.33 incl. VAT
£30.49excl. VAT
£36.59incl. VAT
ZCC-CT HM-4EFP 4 Flute With Reduced Neck for Hardened Steel
ZCC-CT HM-4EFP 4 Flute Reduced Neck End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£30.99 excl. VAT
£37.19 incl. VAT
£26.34excl. VAT
£31.61incl. VAT
Pulsar Blue High Feed Long Length Corner Radius End Mill for Hardened Steel
Pulsar Blue 4 Flute High Feed Long Length Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- Corner radius
- High speed cutting
- High feed geometry
- Short flute for maximum strength
£36.41 excl. VAT
£43.69 incl. VAT
£30.06excl. VAT
£36.07incl. VAT
NANO-MILL Max-Mill JLR Series Coated Carbide 4 Flute Corner Radius Long Length End Mill
Max-Mill Coated Carbide 4 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£13.23 excl. VAT
£15.88 incl. VAT
Max-Mill TIALN Coated Carbide 4 Flute Milling Cutters
Max-Mill Coated Carbide 4 Flute End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
ZCC-CT HM-4RP 4 Flute Reduced Neck Corner Radius End Mill for Hardened Steel
ZCC-CT 4 Flute Reduced Neck Corner Radius End Mill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£26.25 excl. VAT
£31.50 incl. VAT
£22.31excl. VAT
£26.77incl. VAT
ZCC-CT HM-4BL 4 Flute Ball Nose Long Shank for Hardened Steel
ZCC-CT HM-4BL 4 Flute Ball Nose End Mill with Long Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£37.36 excl. VAT
£44.83 incl. VAT
£31.76excl. VAT
£38.11incl. VAT
Pulsar Blue 4 Flute Corner Radius Extended Neck End Mill for Hardened Steel
Pulsar Blue 4 Flute Extended Neck Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£36.71 excl. VAT
£44.05 incl. VAT
£30.29excl. VAT
£36.35incl. VAT
NANO-MILL Max-Mill JER Series Coated Carbide 4 Flute Corner Radius End Mill
Max-Mill Coated Carbide 4 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£9.94 excl. VAT
£11.93 incl. VAT
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£31.91 excl. VAT
£38.29 incl. VAT
£27.12excl. VAT
£32.54incl. VAT
Max-Mill 4 Flute Coated Carbide Ball Nose Milling Cutters
Max-Mill Coated Carbide 4 Flute Ball Nosed End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
ZCC-CT Coated Carbide 4 Flute End Mills Long Length
- For Machining Up To 55HRC
- Suitable For Steel, Stainless Steel, Cast Iron and Heat Resistant Alloys
- Very Solid Cutting Edge With High Rigidity for Higher Cuttng Speeds and Feed Rates
- Diameter Range 3mm - 20mm
- Solid Micrograin Carbide
- PVD Coated Substrate
£19.80 excl. VAT
£23.76 incl. VAT
£16.83excl. VAT
£20.20incl. VAT