Milling Cutters for Machining Hardened Steel

Banner image highlighting some of the products in this category.

Sort By

Image of a JELF series 4 flute end mill milling cutter

Max-Mill TiAlN Coated Carbide 4 Flute Long Length Milling Cutters

Series: JELF**04

Solid Micrograin Carbide
TiALN coated
Suitable for machining upto 55HRC
Can be used for wet and dry cutting
Centre cutting
Available diameter sizes between 1mm and 20mm

Starting From:
£15.23 excl. VAT
£18.28 incl. VAT

View Products Cutting Data

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank

ZCC-CT HM-4E Series 4 Flute Hardened Steel Milling Cutters

Series: HM-4E

ZCC-CT HM-4E 4 Flute End Mill with Straight Shank For Hardened Steels

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£14.24 excl. VAT
£17.09 incl. VAT

Offer Price From:
£12.10excl. VAT
£14.52incl. VAT

15% DISCOUNT

View Products Cutting Data

ZCC-CT HM Series 2 Flute Ball Nose Rib Processing Hardened Steel Milling Cutters

Series: HM-2BP

ZCC-CT HM-2BP 2 Flute Ball Nose Rib Processing Slot Drill

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£21.37 excl. VAT
£25.64 incl. VAT

Offer Price From:
£18.16excl. VAT
£21.79incl. VAT

15% DISCOUNT

View Products Cutting Data

Max-Mill Coated Carbide 4 Flute Roughing End Mill

NANO-MILL Max-Mill JWA Series Coated Carbide 4 Flute Roughing End Mill

Series: JWA**04

Max-Mill Coated Carbide 4 Flute Roughing End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£21.77 excl. VAT
£26.12 incl. VAT

View Products Cutting Data

ZCC-CT HM-6E 6 Flute End Mill with Straight Shank

ZCC-CT HM-6E Series 6 Flute End Mill with Straight Shank for Hardened Steel Machining

Series: HM-6E

ZCC-CT HM-6E 6 Flute End Mill with Straight Shank

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£25.59 excl. VAT
£30.71 incl. VAT

Offer Price From:
£21.75excl. VAT
£26.10incl. VAT

15% DISCOUNT

View Products Cutting Data

Max-Mill Coated Carbide 2 Flute Ball Nose Long Length End Mill.

NANO-MILL Coated Carbide 2 Flute Ball Nose Long Slot Drill

Series: JJB**02

Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill

Suitable for steels, stainless steels, inconel and titanium
Can be used wet or dry
Suitable for machining up to 55 HRC
TiALN coated micrograin carbide

Starting From:
£22.29 excl. VAT
£26.75 incl. VAT

View Products Cutting Data

ZCC-CT 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining

ZCC-CT HM-2BL Series 2 Flute Long Length Ball Nose Slot Drill for Hardened Steel Machining

Series: HM-2BL

ZCC-CT 2 Flute Long Length Ball Nose Slot Drill

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£37.36 excl. VAT
£44.83 incl. VAT

Offer Price From:
£31.76excl. VAT
£38.11incl. VAT

15% DISCOUNT

View Products Cutting Data

ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck for Hardened Steel

Series: HM-2EP

ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£19.35 excl. VAT
£23.22 incl. VAT

Offer Price From:
£16.45excl. VAT
£19.74incl. VAT

15% DISCOUNT

View Products Cutting Data

ZCC-CT HM-4EL 4 Flute Long Length Series for Hardened Steel

Series: HM-4EL

ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£22.52 excl. VAT
£27.02 incl. VAT

Offer Price From:
£19.14excl. VAT
£22.97incl. VAT

15% DISCOUNT

View Products Cutting Data

Max-Mill JE Series Coated Carbide 2 Flute Square End Mill

NANO-MILL JE Series Coated Carbide 2 Flute Square Slot Drill

Series: JE**02

Max-Mill Coated Carbide 2 Flute End Mill from Nano-Mill

Suitable for steels, stainless steels, inconel and titanium
Can be used wet or dry
Suitable for machining up to 55 HRC
TiALN coated micrograin carbide

Starting From:
£8.28 excl. VAT
£9.94 incl. VAT

Clearance

View Products Cutting Data

ZCC-CT HM-4R 4 Flute Corner Radius End Mill with Straight Shank.

ZCC-CT HM-4R 4 Flute Corner Radius End Mill for Hardened Steel

Series: HM-4R

ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£25.01 excl. VAT
£30.01 incl. VAT

Offer Price From:
£21.26excl. VAT
£25.51incl. VAT

15% DISCOUNT

View Products Cutting Data

Max-Mill Coated Carbide 2 Flute Corner Radius End Mill

NANO-MILL Max-Mill JNR Series Coated Carbide 2 Flute Corner Radius End Mill

Series: JNR****

Max-Mill Coated Carbide 2 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£9.94 excl. VAT
£11.93 incl. VAT

Clearance

View Products Cutting Data

ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank

ZCC-CT HM-2ES Series 2 Flute Micro Diameter End Mill with Straight Shank for Hardened Steel Machining

Series: HM-2ES

ZCC-CT HM-2ES 2 Flute Micro Diameter End Mill with Straight Shank

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC
Starting at 0.3mm diameter

Starting From:
£12.07 excl. VAT
£14.48 incl. VAT

Offer Price From:
£10.26excl. VAT
£12.31incl. VAT

15% DISCOUNT

View Products Cutting Data

Pulsar Blue 103350 Series 4 Flute Reduced Neck Corner Radius End Mill.

Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel

Series: 103350

Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Corner radius
Suitable for machining upto 70HRC
High speed cutting
30 degree helix
Excellent workpiece finish

Starting From:
£22.44 excl. VAT
£26.93 incl. VAT

Offer Price From:
£19.07excl. VAT
£22.88incl. VAT

15% DISCOUNT

View Products Cutting Data

NANO-MILL Max-Mill JIB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 75mm OAL

Series: JIB**02

Max-Mill Coated Carbide 2 Flute Long Length Ball Nose End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

Starting From:
£15.24 excl. VAT
£18.29 incl. VAT

View Products Cutting Data

Pulsar Blue 102950 Series 6 & 8 Flute 45 Degree Helix Long Series End Mill.

Pulsar Blue 6 & 8 Flute 45 Degree Helix Long Series End Mill for Hardened Steel

Series: 102950

Pulsar Blue 6 & 8 Flute Long End Mill for Hardened Steel

Premium nanograin carbide
Suitable for dry cutting
Suitable for machining upto 70HRC
High speed cutting
45 degree helix
Excellent workpiece finish

Starting From:
£38.16 excl. VAT
£45.79 incl. VAT

Offer Price From:
£32.44excl. VAT
£38.93incl. VAT

15% DISCOUNT

View Products Cutting Data

ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank

ZCC-CT HM-2B Series 2 Flute Ball Nose End Mill with Straight Shank for Hardened Steel Machining

Series: HM-2B

ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank

Excellent tool design covers large chip pocket, good stability and machining efficiency
Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
Ultra fine grain carbide
KMG555 Nano-ALTiN coating base for hard machining at high temperatures
For machining upto 68HRC

Starting From:
£28.93 excl. VAT
£34.72 incl. VAT

Offer Price From:
£24.59excl. VAT
£29.51incl. VAT

15% DISCOUNT

View Products Cutting Data