Diameter
Shank Diameter
Cutting Length
Overall Length
Brand
No. Flutes
Profile
Length
Application
Substrate
Deals
Radius
Length Below Shank
Neck Dia
Hardened Steel Milling Cutters Milling Tools
1.0MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
1.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
2.0MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
2.5MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£19.35 excl. VAT
£23.22 incl. VAT
£16.45excl. VAT
£19.74incl. VAT
3.0MM HM SERIES 2 FLUTE SHORT CUTTING EDGE LONG NECK END MIL
ZCC-CT HM-2EP 2 Flute Slot End Mill with Short Cutting Edge and Long Neck
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£21.18 excl. VAT
£25.42 incl. VAT
£18.00excl. VAT
£21.60incl. VAT
1.5MM 2FLT B/N RIB PULSAR BLUE
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£42.17 excl. VAT
£50.60 incl. VAT
£34.80excl. VAT
£41.76incl. VAT
2mm 2FLT B/N RIB PULSAR BLUE
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£39.55 excl. VAT
£47.46 incl. VAT
£32.64excl. VAT
£39.17incl. VAT
3MM 2FLT B/N RIB PULSAR BLUE
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£55.46 excl. VAT
£66.55 incl. VAT
£45.76excl. VAT
£54.91incl. VAT
6.0MM 4FLT STUB PULSAR BLUE
Pulsar Blue 4 Flute Extended Neck Corner Radius Stub Length End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£33.81 excl. VAT
£40.57 incl. VAT
£27.90excl. VAT
£33.48incl. VAT
6MM X R0.5 6FL 45D PULSAR BLUE
Pulsar Blue 6 Flute Helix Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Corner radius
- Suitable for machining upto 70HRC
- High speed cutting
- 45 degree helix
- Excellent workpiece finish
£48.48 excl. VAT
£58.18 incl. VAT
£40.02excl. VAT
£48.02incl. VAT