ZSD High Precision Indexable Inserts From ZCC-CT
SPMX060204 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£7.88 excl. VAT
£9.46 incl. VAT
SPMX060204 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£8.63 excl. VAT
£10.36 incl. VAT
SPMX060204 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£6.05 excl. VAT
£7.26 incl. VAT
SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£8.12 excl. VAT
£9.74 incl. VAT
SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£6.18 excl. VAT
£7.42 incl. VAT
SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£8.27 excl. VAT
£9.92 incl. VAT
SPMX040203 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£8.27 excl. VAT
£9.92 incl. VAT
SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£0.00 excl. VAT
£0.00 incl. VAT
SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£7.34 excl. VAT
£8.81 incl. VAT
SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£0.00 excl. VAT
£0.00 incl. VAT
SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£6.87 excl. VAT
£8.24 incl. VAT
SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£6.81 excl. VAT
£8.17 incl. VAT
SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£0.00 excl. VAT
£0.00 incl. VAT
SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£0.00 excl. VAT
£0.00 incl. VAT
SPMXT090408 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£6.81 excl. VAT
£8.17 incl. VAT
SPMXT090408 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£6.80 excl. VAT
£8.16 incl. VAT
SPMXT090408 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£6.80 excl. VAT
£8.16 incl. VAT