Aluminium & Non-Ferrous Milling Cutters Milling Tools

ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 1mm and 20mm

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm to 20mm

• Suitable for machining of aluminium and other non-ferrous materials.
• Mirror polished fl utes
• Excellent surface finishes, superior chip removal.
• Micrograin carbide
• Hi-helix geometry
• Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm

• Solid micrograin carbide
• 38 degree helix geometry enable better chip removal
• Polished flutes for superior surface finish
• 2 flutes

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

• 2 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

Alu-XP 2 Flute Carbide Slot Drill for Aluminium 

• Excellent surface finishes.
• Superior chip removal
• Micrograin solid carbide substrate
• Mirror polished Flutes
• Suitable for high speed machining of aluminium and other non-ferrous materials
• Corner protected.

Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill

• HSS 8% cobalt
• Uncoated 
• Weldon shank
• Suitable for a wide range of materials

• Excellent surface finishes.
• Superior chip removal
• Micrograin solid carbide substrate
• Mirror polished Flutes
• Suitable for high speed machining of aluminium and other non-ferrous materials
• Corner protected.
• Long series

CLARKSON HSS Co8 2 Flute Threaded Shank Slot Drill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

CLARKSON HSS Co8 Threaded Shank End Mill

• HSS 8% cobalt
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials

Alu-XP 3 Flute Long Length Weldon Shank Ripper

• Excellent surface finishes.
• Superior chip removal.
• Flatted shank.
• Micrograin solid carbide substrate.
• Corner protected.

Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.

CLARKSON HSS Co8 2 Flute Ball Nose Slot Drill

• HSS 8% cobalt
• uncoated
• Weldon (flatted) shank
• Suitable for a wide range of materials

ALI-MAX Solid Carbide 2 Flute Slot Drill from Nano-Mill 

• 55 degree helix
• Manufactured from ultra fine micrograin carbide
• Sharp cutting edge for greater swarf evacuation
• Ideal for aluminium and non-ferrous machining

CLARKSON TiALN HSS Co8 2 Flute Short Length Slot Drill

• HSS 8% coablt
• TiALN coated
• Weldon (flatted) shank 
• Suitable for a wide range of materials

2 Flute Corner Radius Long Length End Mill for Aluminium

• Newly developed geometry
• New KMD401 diamond like coating for significantly improved tool life
• Wide range of radii available on larger diameters

2 Flute CrN Coated Carbide Aluminium Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 1mm-12mm 

ALI-MAX Solid Carbide 2 Flute Long Length End Mill from Nano Mill.

• 55 degree helix
• Manufactured from ultra fine micrograin carbide
• Sharp cutting edge for greater swarf evacuation

Clarkson 2 Flute HSS Threaded Shank Slot Drill

• HSS
• Threaded shank
• Uncoated
• Suitable for a wide range of materials

Clarkson 2 Flute HSS Threaded Shank Long Length Slot Drill

• HSS
• Uncoated 
• Threaded shank
• Suitable for a wide range of materials