Corner Radius Milling Cutters, End Mills and Slot Drills

ECO-MILL coated carbide 4 flute end mill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel stainless steel, cast iron and non-ferrous material including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 25mm

ECO-MILL coated carbide 3 flute end mill from STÄRKE, a TiALN coated general purpose milling cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm and 20mm

ALI-MILL Solid Carbide 3 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

V55 Mill Coated Carbide 4 Flute End Mill from STÄRKE is a TiALN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.

V60 Mill Coated Carbide 4 Flute End Mill from STARKE is a ALCRSiN high performance milling cutter.

• Premium grade carbide substrate 1st choice for machining stainless, inconels, titanium and steels.
• Variable helix angle designed to rough and finish with 1 tool.
• Chatter free design which allows for increased cutting depths and feed rates.
• Replaces the V554 series. Now has an improved coating to machine to a higher HRC.

• 3 flute HSSE slot drill
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

• 3 & 4 flute HSSE end mill ripper
• HSS 8% Cobalt gives improved tool life and performance in comparison to conventional HSS
• 1st choice for economical machining
• TIALN coated for increased tool life

ALI-MILL Solid Carbide 2 Flute 45 Degree End Mill from STÄRKE is 1st choice for machining aluminium and non ferrous material.

• Polished flutes for superior surface finish.
• The special Hi-Helix geometry enables better chip removal.
• Micrograin carbide

ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 1mm and 20mm

Clarkson PM75 Multiple Helix high Performance 4 Flute End Mill for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

Clarkson PM75 Multiple Helix high Performance Fine Pitch Ripper for General purpose machining in steels up to HRc40 Cast Iron Stainless steel Inconel. ASP60 premium powder metallurgy substrate with unique VX coating for longer tool life and superior surface finish.

• Multiple helix technology for reduced vibration
• Excellent performance in unstable machining conditions
• Higher cutting speed than equivalent HSSCo tools
• Reduced chatter
• Improved tool harmonics
• Exceptional performance in unstable cutting conditions
• Increased chip flow

• Micrograin Carbide
• TIALN coated to machine up to 45 HRC
• Excellent general purpose cutter for machining steel, stainless steel, aluminium alloys, cast iron and copper
• Centre cutting
• Sizes available: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 16mm

ECO-MILL Coated Carbide 2 Flute End Mill from STÄRKE is a TiALN coated general purpose cutter.

• Suitable for cutting steel, stainless steel, cast iron and non-ferrous material including cast aluminium and copper.
• Cut up to 45 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Centre cutting
• Available diameter sizes between 1mm to 20mm

• Cut up to 55 HRC 
• Can be used wet or dry to increase tool life.
• Micrograin carbide
• Available diameter sizes between 6mm and 20mm

• Suitable for machining aluminium and other non-ferrous materials
• Mirror polishied flutes
• Excellent surface finishe and superior chip removal
• Micrograin carbide
• Hi-helix geometry
• Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm

• Suitable for machining of aluminium and other non-ferrous materials.
• Mirror polished fl utes
• Excellent surface finishes, superior chip removal.
• Micrograin carbide
• Hi-helix geometry
• Sizes available: 3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm

• Solid micrograin carbide
• 38 degree helix geometry enable better chip removal
• Polished flutes for superior surface finish
• 2 flutes

Max-Mill Coated Carbide 4 Flute Roughing End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.

The Alu-Cut series for high performance machining of aluminum and high silicon aluminum.

• Highest metal removal rates for stable milling processes
• Several corner radii per diameter
• Center cutting
• Uncoated
• Available with high performance GLT coating works in copper alloys in addition to aluminum
• Rough and finish with 1 tool

Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill

• Suitable for steels, stainless steels, inconel and titanium
• Can be used wet or dry
• Suitable for machining up to 55 HRC
• TiALN coated micrograin carbide

 2 Flute Coated Aluminium Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

Alu-XP 3 Flute Carbide Long Length End Mill for Aluminium 

• Excellent surface finishes.
• Superior chip removal
• Micrograin solid carbide substrate
• Mirror polished Flutes
• Suitable for high speed machining of aluminium and other non-ferrous materials
• Corner protected.
• Long series

2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill

• For machining of Aluminiums, Copper, Brass and Bronze
• Excellent sharpness of cutting edge for very good surface quality
• CrN coating for improved tool life
• Sizes from 0.5mm-5mm 

FRANKEN 4 Flute Long Length High Performance End Mill 

• Solid micrograin carbide
• TiALN coated 
• Centre cutting
• Variable helix geometry
• Rough and finish with 1 tool
• Chamfered for corner protection 
• Suitable for steel, stainless steel, cast iron, titanium and HRSA