Filter by:
Cutting Length
Overall Length
Application
Range
Length Below Shank
Neck Dia
Milling Cutters Milling Tools
STARKE 4mm 2 Flutes Ball Nose Coated Carbide Slot Drill 4x8x4x50
ECO-MILL coated carbide 2 flute ball nosed slot drill from STÄRKE, a TiALN coated general purpose cutter.
- Suitable for cutting steel, stainless steel, cast iron and non-ferrous materials including aluminium alloys and copper.
- Cut up to 45 HRC
- Can be used wet or dry to increase tool life.
- Micrograin carbide
- Available diameter sizes between 1mm and 20mm
£7.54 excl. VAT
£9.05 incl. VAT
Long Shank 2 Flutes Ball Nose End Mills 4x6x8x100
Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£22.29 excl. VAT
£26.75 incl. VAT
Pencil Neck Ball Nose End Mill R=2.0; Z=2; Shaft HA; coated
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£21.90 excl. VAT
£26.28 incl. VAT
£18.62excl. VAT
£22.34incl. VAT
Pencil Neck Ball Nose End Mill R=2.0; Z=2; Shaft HA; coated
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£21.90 excl. VAT
£26.28 incl. VAT
£18.62excl. VAT
£22.34incl. VAT
2 FLUTE CrN COATED ALUMINIUM BALL NOSE END MILL
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£21.90 excl. VAT
£26.28 incl. VAT
£18.62excl. VAT
£22.34incl. VAT
2 FLUTE CrN COATED ALUMINIUM BALL NOSE END MILL
2 Flute CrN Coated Aluminium Ball Nose Rib Processing Micro Slot Drill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 0.5mm-5mm
£21.90 excl. VAT
£26.28 incl. VAT
£18.62excl. VAT
£22.34incl. VAT
Ball Nose End Mill R=2.0; Z=2; Shaft HA; coated
ZCC-CT 2 Flute Long Length Ball Nose Slot Drill
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£37.36 excl. VAT
£44.83 incl. VAT
£31.76excl. VAT
£38.11incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 2,0 / 10 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£53.96 excl. VAT
£64.75 incl. VAT
£47.15excl. VAT
£56.58incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 2,0 / 12 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£71.64 excl. VAT
£85.97 incl. VAT
£62.60excl. VAT
£75.12incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 2,0 / 16 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£112.88 excl. VAT
£135.46 incl. VAT
£98.63excl. VAT
£118.36incl. VAT
Carbide End Mill TOP-CUT "ENORM" long typeN TIALN R 2,0 / 20 mm
FRANKEN Top-Cut 4 Flute Corner Radius High Performance End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Corner radius
- Several coerner radii per cutting diameter
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£167.63 excl. VAT
£201.16 incl. VAT
£146.48excl. VAT
£175.78incl. VAT
8mm x 65mm OAL C/R 2mm ALU-XP 3FL 45DEG E/M
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£39.43 excl. VAT
£47.32 incl. VAT
£32.55excl. VAT
£39.06incl. VAT
10MMXR2.0 CARB 3FL LONG 45DEG ALU-XP
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£45.17 excl. VAT
£54.20 incl. VAT
£37.28excl. VAT
£44.74incl. VAT
12MMXR2.0 CARB 3FL LONG 45DEG ALU-XP
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£63.25 excl. VAT
£75.90 incl. VAT
£52.21excl. VAT
£62.65incl. VAT
16MMXR2.0 CARB 3FL LONG 45DEG ALU-XP
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£105.77 excl. VAT
£126.92 incl. VAT
£87.28excl. VAT
£104.74incl. VAT
20MMXR2.0 CARB 3FL LONG 45DEG ALU-XP
Alu-XP tools with Òmirror polishedÓ flutes allow for smooth chip evacuation, giving better surface finish and wear resistance. Cutting edges are optimised to minimise vibration, and 3-flute tools have a tight diameter tolerance giving excellent process reliability.
£179.44 excl. VAT
£215.33 incl. VAT
£148.09excl. VAT
£177.71incl. VAT
Long Shank 2 Flutes Ball Nose End Mills 4x4x8x75
£19.10 excl. VAT
£22.92 incl. VAT
2.0MM RAD HM SERIES 2 FLUTE BALL NOSE END MILL
ZCC-CT HM-2B 2 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£31.91 excl. VAT
£38.29 incl. VAT
£27.12excl. VAT
£32.54incl. VAT
12MM X R2.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£74.32 excl. VAT
£89.18 incl. VAT
£61.33excl. VAT
£73.60incl. VAT
16MM X R2.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£131.12 excl. VAT
£157.34 incl. VAT
£108.21excl. VAT
£129.85incl. VAT
20MM X R2.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£201.78 excl. VAT
£242.14 incl. VAT
£166.52excl. VAT
£199.82incl. VAT
6MM X R2.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£25.57 excl. VAT
£30.68 incl. VAT
£21.10excl. VAT
£25.32incl. VAT
10MM X R2.0 MASTERMILL-VX
- Corner radius
- Solid micrograin carbide
- Chamfered for corner protection
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£52.46 excl. VAT
£62.95 incl. VAT
£43.29excl. VAT
£51.95incl. VAT
8mm MASTERMILL-VXD 4FL DC CR E/M R2
- Solid micrograin carbide
- Reduced tool vibration
- Multi layer VX coating
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
- Exceptional performance in Titanium, Inconel and other HRSA material
- Double core geometry reduces tool deflection and improves dimensional stability
- Optimized edge preparation protects against chipping problems in high speed machining
- 4 Flute Double Core with unique flute design for excellent chip evacuation and high rigidity
- Increased stability and chip flow reduces tool defelection, improving dimensional stability and workpiece accuracy
- Chip clogging minimized when used for slotting.
£40.85 excl. VAT
£49.02 incl. VAT
£33.71excl. VAT
£40.45incl. VAT