Clearance
DNMG150408-AM M2501 Carbide Turning Insert (Medium Chipbreaker)
- Grade M2501 is our first choice and best performing insert for turning stainless steel and heat resistant super alloys at low cutting speeds
- PVD coated
- AM chipbreaker designed for medium turning applications
- DNMG negative geometry
- 55° rhombic insert
£5.17 excl. VAT
£6.20 incl. VAT
£2.61excl. VAT
£3.13incl. VAT
NEUWERK Metric Coarse Machine Tap Spiral Point HSSV3 422TLWM Series for Stainless Steel
The 422TLWM series machine tap from NEUWERK is our 1st choice tap for high performance threading of stainless steel, carbon steel and tempered steel. It is made from Vanadium Cobalt Substrate with a TiN Alox coating providing long tool life.
NEUWERK are a leading European manufacturer of high quality machine taps providing high performance and reliability
2 Flutes Long Shank Square End Mills 20x20x75x150
ALI-MAX Solid Carbide 2 Flute Long Length End Mill from Nano Mill.
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
£177.13 excl. VAT
£212.56 incl. VAT
£119.47excl. VAT
£143.36incl. VAT
Osborn 811505 Goldex HSS-E Jobber Drill Worm Pattern
Features:
- Bright finish body and worm pattern for maximum chip clearance
- Self centring split point
- TiN coated on working area for longer tool life
- Designed for drilling deep holes in steel, stainless steel, cast iron, titanium and aluminium.
* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5
Nano-Mill SD120 Series 120 Degree Spot Drill
NEUWERK Metric Coarse Machine Taps Spiral Flute HSSE H40TM Series for General Purpose
The H40TM series machine tap from NEUWERK is our 1st choice tap for general purpose high performance threading of steel, cast iron, aluminium and copper. It has a Titanium Nitride coating providing long tool life.
NEUWERK are a leading European manufacturer of high quality machine taps providing high performance and reliability
25MM SHANK LEFT HANDED DOUBLE CLAMP TURNING TOOL
- Double Clamp System
- More Rigid Insert Clamping
- Suitable For WN**
- 95 Degree Approach
£56.27 excl. VAT
£67.52 incl. VAT
£27.12excl. VAT
£32.54incl. VAT
TNMG160412-KR KA9000 Carbide Turning Insert (Roughing Chipbreaker)
- Grade KA9000 is our universal grade for turning most steels and cast iron
- CVD coated
- KR chipbreaker is designed for roughing and interrupted cutting
- TNMG negative geometry
- Triangular insert
£3.52 excl. VAT
£4.22 incl. VAT
£1.78excl. VAT
£2.14incl. VAT
Carbide end mill TOP-CUT short typeN TIALN 5,5 mm
FRANKEN Top-Cut 3 Flute High Performance Short Length End Mill
- Solid micrograin carbide
- TiALN coated
- Centre cutting
- Variable helix geometry
- Rough and finish with 1 tool
- Chamfered for corner protection
- Suitable for steel, stainless steel, cast iron, titanium and HRSA
£18.48 excl. VAT
£22.18 incl. VAT
£11.17excl. VAT
£13.40incl. VAT
10MM HIGH PERF JOBBER
£27.37 excl. VAT
£32.84 incl. VAT
£15.23excl. VAT
£18.28incl. VAT
DCMT11T304-KM P2501 Carbide Turning Insert (Medium Chipbreaker)
- Grade P2501 is our first choice and best performing insert for turning steel
- CVD coated
- KM chipbreaker is designed for medium turning applications
- DCMT positive geometry
- 55° rhombic Insert
£4.12 excl. VAT
£4.94 incl. VAT
£2.42excl. VAT
£2.90incl. VAT
VCMT160408-KM KA9000 Carbide Turning Insert (Medium Chipbreaker)
- Grade KA9000 is our universal grade for turning most steels and cast iron
- PVD coated
- KM chipbreaker is designed for medium turning applications
- VCMT positive geometry
- 35° rhombic insert
£5.08 excl. VAT
£6.10 incl. VAT
£2.98excl. VAT
£3.58incl. VAT
TNMG220408-KM P2501 Carbide Turning Insert (Medium Chipbreaker)
- Grade P2501 is our first choice and best performing insert for turning steel
- CVD coated
- KM chipbreaker designed for medium turning applications
- TNMG negative geometry
- Triangular insert
£5.04 excl. VAT
£6.05 incl. VAT
£2.46excl. VAT
£2.95incl. VAT
Enorm 1-MULTI-R35-NE2 machine tap 5/16-24 UNF-2B
The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.
- NE2 is oxidised to stop cold welding
- Multi purpose tap to machine steels,stainless steel,cast iron, aluminium and non-ferrous materials
- Attractive price-performance ratio
max. 2.5 x d1
£31.23 excl. VAT
£37.48 incl. VAT
£18.42excl. VAT
£22.10incl. VAT
Rekord 1A-MULTI-GLT-1 machine tap M6-6HX
The EMUGE Multi-tap is the original all purpose tapping solution for nearly all materials.
- GLT1 is a Multi layered coating which has a hard smooth surface
- Tremendous increase in tool life and superior swarf evacuation
- High performance tap to machine steels, stainless steel, duplex,cast iron, aluminium and non-ferrous materials
- Attractive price-performance ratio
max. 2 x d1
£29.46 excl. VAT
£35.35 incl. VAT
£17.11excl. VAT
£20.53incl. VAT
8.0mm END MILL COBALT SHORT F/SHANK TIALN
Clarkson 4-6 Flute HSS Co8 TiAlN Coated Short Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£14.78 excl. VAT
£17.74 incl. VAT
£7.68excl. VAT
£9.22incl. VAT
93 DEGREE DNMG15** LEFT HAND TOOL HOLDER
- Multi Clamp System
- Suitable for DN** Style Inserts
- 93 Degree Approach
£39.46 excl. VAT
£47.35 incl. VAT
£25.63excl. VAT
£30.76incl. VAT
Long Flutes Square 2 Flutes End Mills 10x10x40x100
- Solid Micrograin Carbide
- TiALN coated
- Suitable for machining upto 55HRC
- Can be used for wet and dry cutting
- Centre cutting
£39.78 excl. VAT
£47.74 incl. VAT
£24.54excl. VAT
£29.45incl. VAT
Osborn 820901 HSS Long Series Straight Shank Drill
Features:
- H8 Tolerance
- Straight Shank Drill
- Point angle 135 Degree
- DIN334
- Long Series
* Minimum order quantities - Up to 6mm qty 10, Above 6mm qty 5
VDI40 B4-25x44 Radial Holder, Overhead Left Hand Short
£80.00 excl. VAT
£96.00 incl. VAT
£46.83excl. VAT
£56.20incl. VAT
Standard 2 Flutes Ball Nose End Mills 16x16x32x100
Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£73.19 excl. VAT
£87.83 incl. VAT
£52.27excl. VAT
£62.72incl. VAT
Standard 2 Flutes Ball Nose End Mills 20x20x32x100
Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£117.32 excl. VAT
£140.78 incl. VAT
£94.38excl. VAT
£113.26incl. VAT
NANO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
CCMT09T304-KM P2501 Carbide Turning Insert (Medium Chipbreaker)
- Grade P2501 is our first choice and best performing insert for turning steel
- CVD coated
- KM chipbreaker designed for medium turning applications
- CCMT positive geometry
- 80° rhombic insert
£3.65 excl. VAT
£4.38 incl. VAT
£2.06excl. VAT
£2.47incl. VAT