Nano Mill Carbide Milling Cutters for All Applications
Max-Mill TiAlN Coated Carbide 4 Flute Long Length Milling Cutters
- Solid Micrograin Carbide
- TiALN coated
- Suitable for machining upto 55HRC
- Can be used for wet and dry cutting
- Centre cutting
- Available diameter sizes between 1mm and 20mm
£15.23 excl. VAT
£18.28 incl. VAT
Ali-Max 3 Flute Long Length Milling Cutters For Aluminium
ALI-MAX Solid Carbide 3 Flute Long Length End Mill from Nano Mill.
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
£17.32 excl. VAT
£20.78 incl. VAT
Max-Mill TIALN Coated Carbide 4 Flute Milling Cutters
Max-Mill Coated Carbide 4 Flute End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
Ali-Max 2 Flute Solid Carbide Milling Cutters for Machining Aluminium
ALI-MAX Solid Carbide 2 Flute Slot Drill from Nano-Mill
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
- Ideal for aluminium and non-ferrous machining
Ali-Max 3 Flute Solid Carbide Milling Cutters for Machining Aluminium
ALI-MAX Solid Carbide 3 Flute End Mill from Nano-Mill
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
- Ideal for aluminium and non-ferrous machining
£8.23 excl. VAT
£9.88 incl. VAT
Max-Mill 4 Flute Coated Carbide Ball Nose Milling Cutters
Max-Mill Coated Carbide 4 Flute Ball Nosed End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
Max-Mill Series 3 Flute Coated Carbide Milling Cutters
Max-Mill Coated Carbide 3 Flute End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£8.28 excl. VAT
£9.94 incl. VAT
NANO-MILL Max-Mill JWA Series Coated Carbide 4 Flute Roughing End Mill
Max-Mill Coated Carbide 4 Flute Roughing End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£21.77 excl. VAT
£26.12 incl. VAT
NANO-MILL Max-Mill JER Series Coated Carbide 4 Flute Corner Radius End Mill
Max-Mill Coated Carbide 4 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£9.94 excl. VAT
£11.93 incl. VAT
NANO-MILL Coated Carbide 2 Flute Ball Nose Long Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Long Length Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
£22.29 excl. VAT
£26.75 incl. VAT
2 Flute Long Length End Mill for Aluminium LAE Series
ALI-MAX Solid Carbide 2 Flute Long Length End Mill from Nano Mill.
- 55 degree helix
- Manufactured from ultra fine micrograin carbide
- Sharp cutting edge for greater swarf evacuation
£17.32 excl. VAT
£20.78 incl. VAT
NANO-MILL Coated Carbide 2 Flute Ball Nose Slot Drill
Max-Mill Coated Carbide 2 Flute Ball Nosed Slot Drill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
Max-Mill TiAlN Coated Carbide 2 Flute Long Length End Mill
- Solid Micrograin Carbide
- TiALN coated
- Suitable for machining upto 55HRC
- Can be used for wet and dry cutting
- Centre cutting
£15.23 excl. VAT
£18.28 incl. VAT
NANO-MILL JE Series Coated Carbide 2 Flute Square Slot Drill
Max-Mill Coated Carbide 2 Flute End Mill from Nano-Mill
- Suitable for steels, stainless steels, inconel and titanium
- Can be used wet or dry
- Suitable for machining up to 55 HRC
- TiALN coated micrograin carbide
NANO-MILL Max-Mill JLR Series Coated Carbide 4 Flute Corner Radius Long Length End Mill
Max-Mill Coated Carbide 4 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
£13.23 excl. VAT
£15.88 incl. VAT
NANO-MILL Max-Mill JNR Series Coated Carbide 2 Flute Corner Radius End Mill
Max-Mill Coated Carbide 2 Flute Corner Radius End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
NANO-MILL Ali-Max AB**02 Series 2 Flute Ball Nose Solid Carbide End Mill for Machining Aluminium
ALI-MAX Solid Carbide 2 Flute Ball Nose End Mill from Nano-Mill is 1st choice for machining aluminium and non ferrous material, giving superior surface finish. The special Hi-Helix geometry enables better chip removal.
£9.55 excl. VAT
£11.46 incl. VAT
NANO-MILL Max-Mill JIB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 75mm OAL
£15.24 excl. VAT
£18.29 incl. VAT
NANO-MILL Max-Mill JLNR Series Coated Carbide 2 Flute Corner Radius Long Length End Mill
Max-Mill Coated Carbide 2 Flute Corner Radius Long Length End Mill from Nano-Mill is a general purpose cutter, ideal for cutting carbon steel, high speed steel, stainless steel, alloy, inconel and titanium. MAX-MILL cutters cut up to 55 HRC, and can be used wet or dry to increase tool life.
NANO-MILL Max-Mill JKB Series Coated Carbide 2 Flute Ball Nose Long Length End Mill 150mm OAL
£33.65 excl. VAT
£40.38 incl. VAT