Filter by:
Diameter
Shank Diameter
Cutting Length
Overall Length
Radius
Length Below Shank
Chamfer
Neck Dia
Diameter
Shank Diameter
Flute Length
Effective Drill Depth
Shank Length
Overall Length
Category
Application
Range
Brand
No. Flutes
Length
Workholding
Pitch (mm)
Diameter
Overall Length
Flute Length
Shank Diameter
Type
Diameter
Mount Type
Clamping Range
Special Offers
ZCC-CT 1588SL15C SL Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 15xD Long Series
1588SL15C SL Series by ZCC-CT. Solid coated carbide for general purpose drilling.
- For deep hole drilling
- For drilling steel, stainless steel, aluminium & non-ferrous material and heat-resistant alloys
- 15xD long series
- Through coolant
£109.07 excl. VAT
£130.88 incl. VAT
£87.26excl. VAT
£104.71incl. VAT
Alu-XP 2 Flute Carbide Slot Drill for Aluminium
Alu-XP 2 Flute Carbide Slot Drill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
£10.10 excl. VAT
£12.12 incl. VAT
£8.59excl. VAT
£10.31incl. VAT
UD Series Solid Coated Carbide Twist Drill 3xD Stub Drill For Stainless Steel & HRSA
- For high-speed drilling of Tough Steel, Stainless Steel and Heat-Resistant Alloys
- TiAlN coated for increased tool life
- Optimised Chipbreaker and sharp cutting edge to avoid built up edge
- High Rake angle
- Through coolant
- 3xD stub drill
£26.88 excl. VAT
£32.26 incl. VAT
£21.50excl. VAT
£25.80incl. VAT
Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill
Clarkson 2 Flute HSS Co8 Weldon Shank Short Length Slot Drill
- HSS 8% cobalt
- Uncoated
- Weldon shank
- Suitable for a wide range of materials
£5.07 excl. VAT
£6.08 incl. VAT
£4.31excl. VAT
£5.17incl. VAT
2 Flute Carbide Reduced Neck End Mill for Aluminium
- Excellent surface finishes.
- Superior chip removal
- Micrograin solid carbide substrate
- Mirror polished Flutes
- Suitable for high speed machining of aluminium and other non-ferrous materials
- Corner protected.
- Long series
£15.00 excl. VAT
£18.00 incl. VAT
£12.75excl. VAT
£15.30incl. VAT
CLARKSON TiALN Coated HSS Co8 Multi Flute Long Length Fine Pitch Ripper
CLARKSON TiALN Coated HSS Co8 Multi Flute Long Length Fine Pitch Ripper
- HSS 8% cobalt
- Fine pitch
- TiALN coated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£37.61 excl. VAT
£45.13 incl. VAT
£31.97excl. VAT
£38.36incl. VAT
ZCC-CT HM-4R 4 Flute Corner Radius End Mill for Hardened Steel
ZCC-CT HM-4R 4 Flute Corner Radius End Mill With Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£25.01 excl. VAT
£30.01 incl. VAT
£21.26excl. VAT
£25.51incl. VAT
ZCC-CT HM-4EL 4 Flute Long Length Series for Hardened Steel
ZCC-CT HM-4E 4 Flute Long Length End Mill with Straight Shank For Hardened Steels
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£22.52 excl. VAT
£27.02 incl. VAT
£19.14excl. VAT
£22.97incl. VAT
ZCC-CT HM-6E Series 6 Flute End Mill with Straight Shank for Hardened Steel Machining
ZCC-CT HM-6E 6 Flute End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
£25.59 excl. VAT
£30.71 incl. VAT
£21.75excl. VAT
£26.10incl. VAT
CLARKSON HSS Co8 2 Flute Threaded Shank Slot Drill
CLARKSON HSS Co8 2 Flute Threaded Shank Slot Drill
- HSS 8% cobalt
- Uncoated
- Threaded shank
- Suitable for a wide range of materials
£6.38 excl. VAT
£7.66 incl. VAT
£5.42excl. VAT
£6.50incl. VAT
Straight Shank Reamers HSS 5% Cobalt
- Intermediate precision HSS-E (M35 Cob) straight shank Reamer.
- Left hand spiral flute, right hand cutting, DIN 212-B
- Tolerance :
- D = 0 + 0.003 mm
£21.53 excl. VAT
£25.84 incl. VAT
£19.38excl. VAT
£23.26incl. VAT
Bison Small Casing Extended Point Revolving Centres
- 60 degree angle tip
- Extended point
- Small body diameter
- Body hardened and ground
- High runnout accuracy and concentricity
- Rotation speed up to 7000 rpm
- Max workpiece weight up to 3000 kgs
- Service life of bearings up to 2000 operation hours
£164.00 excl. VAT
£196.80 incl. VAT
£131.20excl. VAT
£157.44incl. VAT
Bison SJZW3200-3500 Hard Solid Jaws - Outside-Inside Clamping - for 3200 Series And 3500 Series 3-Jaw Self-Centring Scroll Chucks
Hard Solid Jaws (Outside Clamping) to fit Bison 3200 and 3500 series 3-Jaw self centring scroll chucks. Manufactured in Bison Bial's Poland factory, these Genuine OEM replacement jaws offer exceptional quality and accuracy.
£108.00 excl. VAT
£129.60 incl. VAT
£86.40excl. VAT
£103.68incl. VAT
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
Pulsar Blue 2 Flute Rib Processing Ball Nose Slot Drill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- High speed cutting
- 30 degree helix
- Excellent workpiece finish
£33.64 excl. VAT
£40.37 incl. VAT
£28.59excl. VAT
£34.31incl. VAT
ZCC-CT UM-4E Series 4 Flute Variable Helix Milling Cutters
ZCC-CT UM-4E Series 4 Flute Standard Length AlCrN Coated High Performance Variable Helix Solid Carbide End Mill
- Optimised geometry with unequal 38 degree and 41 degree helix angles and unequal pitch.
- Working processes: Square shoulder milling, groove milling, face milling, counter sinking, circular milling and centre cutting.
- End mills and torus Mills.
- HSC/HPC machining.
- AlCrN (Aluminium Chromium Nitride) coated solid carbide for exceptional tool life.
£15.19 excl. VAT
£18.23 incl. VAT
£12.91excl. VAT
£15.49incl. VAT
Bison SP3200-3500 Hard Master Jaws for 32** Series And 35** Series 3-Jaw Self-Centring Scroll Chucks
Hard Master Jaws to fit Bison 3200 and 3500 series 3-Jaw self centring scroll chucks. Manufactured in Bison Bial's Poland factory, these Genuine OEM replacement jaws offer exceptional quality and accuracy.
£179.00 excl. VAT
£214.80 incl. VAT
£143.20excl. VAT
£171.84incl. VAT
ER50 Standard Collets with Max 15 Micron Runout
ER50 standard type 15 micron runout collets, available in diameters from 6mm to 40mm. The standard type, standard accuracy variants of ER collets - the world's most widely used clamping system, used for a wide array of standard precision machining applications.
£24.64 excl. VAT
£29.57 incl. VAT
£12.32excl. VAT
£14.78incl. VAT
Sylvac 30-810-15B IP67 S_CAL EVO Bluetooth 4.0 Caliper
Made with Swiss precision the 0-150mm Sylvac S_Cal EVO Bluetooth Caliper has an integrated Bluetooth Transmitter can transfer data up to 15m. With IP67 rated for water, coolant and lubricant protection. It also has a battery life of up to 3 years, and Sylvac's Absolute system.
- Built-in Bluetooth® 4.0 transmitter
- Extra-large display
- Programmable button according to your needs
- Water protected for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529
- View to read more
Pulsar Blue 4 Flute High Feed Corner Radius End Mill for Hardened Steel
Pulsar Blue 4 Flute High Feed Corner Radius End Mill for Hardened Steel
- Premium nanograin carbide
- Suitable for dry cutting
- Suitable for machining upto 70HRC
- Corner radius
- High speed cutting
- High feed geometry
- Short flute for maximum strength
£33.50 excl. VAT
£40.20 incl. VAT
£28.48excl. VAT
£34.18incl. VAT
Bison Stud and Locknut for Independent and Scroll Lathe Chucks with Camlock Mounting - DIN 55027
£36.00 excl. VAT
£43.20 incl. VAT
£28.80excl. VAT
£34.56incl. VAT
MasterMill VX Series 4 Flute High Performance Ball Nosed End Mill
MasterMill VX 170329 Series 4 Flute High Performance Ball Nosed End Mill
- Solid micrograin carbide
- Minimized tool deflection
- Reduced tool vibration
- Multi layer VX coated
- Variable helix geometry
- Suitable for high perfromance machining of Steel, Stainless steel, Titanium and nickel alloy
£22.01 excl. VAT
£26.41 incl. VAT
£18.71excl. VAT
£22.45incl. VAT
Taper Shank Intermediate Reamers Carbide
- Intermediate precision carbide tipped (K10) taper shank Reamer.
- Left hand spiral flute, right hand cutting, DIN 8051 B
- Tolerance :
- D = ISO H5
- Items on this list are manufactured to order, please allow 48/72 hours for despatch.
£164.43 excl. VAT
£197.32 incl. VAT
£147.99excl. VAT
£177.59incl. VAT
Clarkson 3 Flute HSS Co8 Short Length End Mill
Clarkson 3 Flute HSS Co8 Short Length End Mill
- HSS 8% cobalt
- Uncoated
- Weldon (flatted) shank
- Suitable for a wide range of materials
£9.15 excl. VAT
£10.98 incl. VAT
£7.78excl. VAT
£9.34incl. VAT
Long Series Taper Shank Reamers HSS
- Intermediate precision HSS (M2) long series taper shank Reamer.
- Left hand spiral flute, right hand cutting, BS 328/4
- Supplied by Toolex Ltd.
- Tolerance :
- D = ISO H5
- Items on this list are manufactured to order, please allow 48/72 hours for despatch.
£88.23 excl. VAT
£105.88 incl. VAT
£79.41excl. VAT
£95.29incl. VAT