ZCC-CT
.jpg&w=640&q=75)
MTGNR/L 90 Deg.Multi Lock Turning Tool Holder (TN**)
Series: TTH-MTGNR/L
- Multi Clamp System
- Suitable for TN** Style Inserts
- 90 Degree Approach
Starting From:
£37.42 excl. VAT
£44.90 incl. VAT
£37.42 excl. VAT
£44.90 incl. VAT
.jpg&w=640&q=75)
SDACR/L 90 Deg.Screw Clamp Turning Tool Holder (DC**)
Series: TTH-SDACR/L
- Screw Clamp System
- Suitable for DC** Style Inserts
- 90 Degree Approach
Starting From:
£26.66 excl. VAT
£31.99 incl. VAT
£26.66 excl. VAT
£31.99 incl. VAT
.jpg&w=640&q=75)
DTGNR/L 91 Deg.Double Clamp Turning Tool Holder (TN**)
Series: TTH-DTGNR/L
- Double Clamp System
- More Rigid Insert Clamping
- Suitable For TN**
- 91 Degree Approach
Starting From:
£39.33 excl. VAT
£47.20 incl. VAT
£39.33 excl. VAT
£47.20 incl. VAT
.jpg&w=640&q=75)
PCBNR/L 75 Deg.Lever Lock Turning Tool Holder (CN**)
Series: TTH-PCBNR/L
- Lever Clamp System
- Suitable for CN** Style Inserts
- 75 Degree Approach
Starting From:
£42.53 excl. VAT
£51.04 incl. VAT
£42.53 excl. VAT
£51.04 incl. VAT
.jpg&w=640&q=75)
STFCR/L 91 Deg. Steel Shank Screw Clamp Boring Bar (TC**)
Series: BB-STFCR/L
- Screw Clamp System
- Suitable For TC** Style Inserts
- 91 Degree Approach
- Steel Shank
Starting From:
£42.63 excl. VAT
£51.16 incl. VAT
£42.63 excl. VAT
£51.16 incl. VAT
45° Indexable Chamfer End Mill with Weldon Shank for Insert Style SPMT1204 - ZCC-CT
Series: CMA01-WELDON
- Diameter range Ø12 – 32 mm
- For steel, stainless steel and cast iron
- Chamfer milling cutter 45°
- Weldon shank
Starting From:
£40.31 excl. VAT
£48.37 incl. VAT
£40.31 excl. VAT
£48.37 incl. VAT
30° Indexable Chamfer End Mill with Weldon Shank for Insert Style SPMT1204 - ZCC-CT
Series: CMZ01-WELDON
- Diameter range Ø12 – 32 mm
- For steel, stainless steel and cast iron
- Chamfer milling cutter 30°
- Weldon shank
Starting From:
£40.31 excl. VAT
£48.37 incl. VAT
£40.31 excl. VAT
£48.37 incl. VAT
SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
Series: SPMX050204-EM
The special EM chip breaker series is used for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
Starting From:
£6.18 excl. VAT
£7.42 incl. VAT
£6.18 excl. VAT
£7.42 incl. VAT
.jpg&w=640&q=75)
STGCR/L 91 Deg.Screw Clamp Turning Tool Holder (TC**)
Series: TTH-STGCR/L
- Screw Clamp System
- Suitable for TC** Style Inserts
- 91 Degree Approach
Starting From:
£21.17 excl. VAT
£25.40 incl. VAT
£21.17 excl. VAT
£25.40 incl. VAT
TPKN Insert For Machining Stainless YBC301 (ZCC-CT)
Series: TPKN YBC301
Starting From:
£5.95 excl. VAT
£7.14 incl. VAT
£5.95 excl. VAT
£7.14 incl. VAT
DNMG Finishing Insert For Machining Steel YBC152 Grade (ZCC-CT)
Series: DNMG-DF YBC152
DNMG-DF carbide turning insert for finishing
- Grade YBC152 is our best performing finishing insert for turning steel
- CVD coated
- DF chipbreaker is designed for finishing
- DNMG negative geometry
- 55° rhombic Insert
Starting From:
£5.88 excl. VAT
£7.06 incl. VAT
£5.88 excl. VAT
£7.06 incl. VAT
ZCC-CT 1101SC05 SC Series Solid Coated Carbide Twist Drill for Aluminium & Non-Ferrous Drilling - 5xD Stub Drill
Series: 1101SC05
1101SC05 SC Series by ZCC-CT
- Designed to machine materials with short chips such as aluminium and non-ferrous material
- Improved chip flow due to flute geometry and chip space
- Superior finish and avoids built up edge
- 5xD jobber drill
Starting From:
£6.71 excl. VAT
£8.05 incl. VAT
£6.71 excl. VAT
£8.05 incl. VAT
Offer Price From:
£5.37excl. VAT
£6.44incl. VAT
£5.37excl. VAT
£6.44incl. VAT
SPMT Insert For Machining Steel & Stainless Steel YBM251 (ZCC-CT)
Series: SPMT YBM251
Starting From:
£3.61 excl. VAT
£4.33 incl. VAT
£3.61 excl. VAT
£4.33 incl. VAT
SPKN Insert For Machining Stainless YBC301 (ZCC-CT)
Series: SPKN YBC301
Starting From:
£5.58 excl. VAT
£6.70 incl. VAT
£5.58 excl. VAT
£6.70 incl. VAT
SEET Insert For Machining Aluminium -YD101 (ZCC-CT)
Series: SEET-LH YD101
Starting From:
£4.80 excl. VAT
£5.76 incl. VAT
£4.80 excl. VAT
£5.76 incl. VAT
SPMXT090408 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
Series: SPMX090408-EM
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
Starting From:
£6.81 excl. VAT
£8.17 incl. VAT
£6.81 excl. VAT
£8.17 incl. VAT
ZCC-CT HM-4B 4 Flute Ball Nose End Mill for Hardened Steel
Series: HM-4B
ZCC-CT HM-4B 4 Flute Ball Nose End Mill with Straight Shank
- Excellent tool design covers large chip pocket, good stability and machining efficiency
- Optimized cutting geometry (Rake angle) assures edge stabitlity and sharpness
- Ultra fine grain carbide
- KMG555 Nano-ALTiN coating base for hard machining at high temperatures
- For machining upto 68HRC
Starting From:
£31.91 excl. VAT
£38.29 incl. VAT
£31.91 excl. VAT
£38.29 incl. VAT
Offer Price From:
£27.12excl. VAT
£32.54incl. VAT
£27.12excl. VAT
£32.54incl. VAT
.jpg&w=640&q=75)
SSKCR/L 75 Deg. Steel Shank Screw Clamp Boring Bar (SC**)
Series: BB-SSKCR/L
- Screw Clamp System
- Suitable For SC** Style Inserts
- 75 Degree Approach
- Steel Shank
Starting From:
£42.63 excl. VAT
£51.16 incl. VAT
£42.63 excl. VAT
£51.16 incl. VAT
.jpg&w=640&q=75)
MCBNR/L 75 Deg.Multi Lock Turning Tool Holder (CN**)
Series: TTH-MCBNR/L
- Multi Clamp System
- Suitable for CN** Style Inserts
- 75 Degree Approach
Starting From:
£49.84 excl. VAT
£59.81 incl. VAT
£49.84 excl. VAT
£59.81 incl. VAT
WNMG Roughing Insert For Machining Steel YBC252 Grade (ZCC-CT)
Series: WNMG-DR YBC252
WNMG-DR carbide turning insert for roughing
- Grade YBC252 is our best performing roughing insert for turning steel
- CVD coated
- DR chipbreaker is designed for roughing
- WNMG negative geometry
- 80° trigonal Insert
Starting From:
£4.70 excl. VAT
£5.64 incl. VAT
£4.70 excl. VAT
£5.64 incl. VAT
45° Indexable Chamfer End Mill for Insert Style SPMT1204 - ZCC-CT
Series: CMA01
- Diameter range Ø12 – 32 mm
- For steel, stainless steel and cast iron
- Chamfer milling cutter 45°
Starting From:
£46.74 excl. VAT
£56.09 incl. VAT
£46.74 excl. VAT
£56.09 incl. VAT
.jpg&w=640&q=75)
DDJNR/L 93 Deg. Double Clamp Turning Tool Holder (DN**)
Series: TTH-DDJNR/L
- Double Clamp System
- More Rigid Insert Clamping
- Suitable For DN**
- 93 Degree Approach
Starting From:
£50.27 excl. VAT
£60.32 incl. VAT
£50.27 excl. VAT
£60.32 incl. VAT
.jpg&w=640&q=75)
MWLNR/L 95 Deg.Multi Lock Turning Tool Holder (WN**)
Series: TTH-MWLNR/L
- Multi Clamp System
- Suitable for WN** Style Inserts
- 95 Degree Approach
Starting From:
£47.39 excl. VAT
£56.87 incl. VAT
£47.39 excl. VAT
£56.87 incl. VAT
ZCC-CT 1105SC03 SC Series Solid Coated Carbide Twist Drill for Aluminium & Non-Ferrous Drilling - 3xD Stub Drill
Series: 1105SC03
1105SC03 SC Series by ZCC-CT
- Designed to machine materials with short chips such as aluminium and non-ferrous material
- Improved chip flow due to flute geometry and chip space
- Superior finish and avoids built up edge
- 3xD stub drill
Starting From:
£6.51 excl. VAT
£7.81 incl. VAT
£6.51 excl. VAT
£7.81 incl. VAT
Offer Price From:
£5.21excl. VAT
£6.25incl. VAT
£5.21excl. VAT
£6.25incl. VAT