ZCC-CT
High Feed Indexable End Mill for Insert Style SDMT - ZCC-CT
- Diameter range Ø20 – 40 mm
- For steel, stainless steel and cast iron
- Inserts with four cutting edges
- Ramping possible
- Double clamping system for inserts
£90.06 excl. VAT
£108.07 incl. VAT
.jpg&w=640&q=75)
PDNNR/L 63 Deg.Lever Lock Turning Tool Holder (DN**)
- Lever Clamp System
- Suitable for DN** Style Inserts
- 63 Degree Approach
£37.40 excl. VAT
£44.88 incl. VAT
ZCC-CT VSM 4 Flute High Performance Solid Carbide Corner Radius End Mill
ZCC-CT VSM 4 Flute High Performance Solid Carbide Corner Radius End Mill
- Solid micrograin carbide
- ALTiN coated
- Wide range of corner radii available
- Variable helix geometry
- Sharp cutting edge designed for HRSA
- Smooth machining with minimal vibration
- One tool for roughing and finishing
- Suitable for machining steel, stainless steel, HRSA and hardened steel upto 55HRC
- High metal removal rates
£24.63 excl. VAT
£29.56 incl. VAT
£20.94excl. VAT
£25.13incl. VAT
CCMT Finishing Insert For Machining Steel YBC152 Grade (ZCC-CT)
CCMT-DF carbide turning insert for finishing
- Grade YBC152 is our best performing finishing insert for turning steel
- CVD coated
- DF chipbreaker is designed for finishing
- CCMT positive geometry
- 80° rhombic Insert
£3.91 excl. VAT
£4.69 incl. VAT
.jpg&w=640&q=75)
PTGNR/L 90 Deg. Lever Lock Turning Tool Holder (TN**)
- Lever Clamp System
- Suitable For TN**
- 90 Degree Approach
£31.31 excl. VAT
£37.57 incl. VAT
.jpg&w=640&q=75)
STTCR/L 60 Deg.Screw Clamp Turning Tool Holder (TC**)
- Screw Clamp System
- Suitable for TC** Style Inserts
- 60 Degree Approach
£26.16 excl. VAT
£31.39 incl. VAT
4 Flute CrN Coated Carbide Aluminium End Mill
4 Flute CrN Coated Carbide Aluminium End Mill
- For machining of Aluminiums, Copper, Brass and Bronze
- Excellent sharpness of cutting edge for very good surface quality
- CrN coating for improved tool life
- Sizes from 1mm-12mm
£14.41 excl. VAT
£17.29 incl. VAT
£8.26excl. VAT
£9.91incl. VAT
ZCC-CT 1534SP03C SP Series Solid Coated Carbide Through Coolant Twist Drill for General Purpose Drilling - 3xD Stub Drill
1534SP03C SU Series by ZCC-CT. Solid coated carbide drill.
- For high-speed drilling of Steel, Stainless Steel, Cast Iron, Aluminium & Non-Ferrous material and Heat-Resistant Alloys
- TiAlN coated for increased tool life
- 3xD stub drill
- Through coolant
£30.61 excl. VAT
£36.73 incl. VAT
£24.49excl. VAT
£29.39incl. VAT
.jpg&w=640&q=75)
PSKNR/L 75 Deg.Lever Lock Turning Tool Holder (SN**)
- Lever Clamp System
- Suitable for SN** Style Inserts
- 75 Degree Approach
£42.53 excl. VAT
£51.04 incl. VAT
.jpg&w=640&q=75)
SVVBN 72.3 Deg.Screw Clamp Turning Tool Holder (VB**)
- Screw Clamp System
- Suitable for VB** Style Inserts
- 72.3 Degree Approach
£35.56 excl. VAT
£42.67 incl. VAT
.jpg&w=640&q=75)
SWACR/L 90 Deg.Screw Clamp Turning Tool Holder (WC**)
- Screw Clamp System
- Suitable for WC** Style Inserts
- 90 Degree Approach
£26.16 excl. VAT
£31.39 incl. VAT
SPMX060204 Indexable Drilling Insert for ZSD Series U-Drill - LM - Medium Cutting Chipbreaker
This indexable insert has a wear-resistant coating with high cutting edge strength. With the special LM chipbreaker design, it is used with the ZSD Series indexable drill bodies for drilling holes in the workpiece of stainless steels at high speeds under challenging working conditions.
The special LM chip breaker series is used for steel and stainless steel.
£8.63 excl. VAT
£10.36 incl. VAT
Indexable Face Mill for Insert Styles RCGX, RCKT & RCMW - ZCC-CT
- Diameter range Ø50 – 250 mm
- For steel, stainless steel, cast iron, nonferrous metals and heatresistant alloys
- Screw clamping
£86.31 excl. VAT
£103.57 incl. VAT
SPMX060204 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£6.05 excl. VAT
£7.26 incl. VAT
SPMX07T308 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£0.00 excl. VAT
£0.00 incl. VAT
SPMXT090408 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£6.80 excl. VAT
£8.16 incl. VAT
SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£0.00 excl. VAT
£0.00 incl. VAT
90° Indexable Face Mill for Insert Style ANGX - ZCC-CT
- Diameter range Ø40 – 250 mm
- For steel, cast iron and non-ferrous metals
- Double sided, thicker inserts for high stability and deeper cutting depths
- Inserts with four cutting edges
£131.12 excl. VAT
£157.34 incl. VAT
SPMX110408 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£6.87 excl. VAT
£8.24 incl. VAT
SPMX140512 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£0.00 excl. VAT
£0.00 incl. VAT
SPMX050204 Indexable Drilling Insert for ZSD Series U-Drill - XM - Medium Cutting Chipbreaker
The special XM chip breaker is an all-rounder geometry with good chip control for steel, stainless steel and cast iron.
It is used with the ZSD Series indexable drill bodies.
£8.27 excl. VAT
£9.92 incl. VAT
SPMX060204 Indexable Drilling Insert for ZSD Series U-Drill - EM - Medium Cutting Chipbreaker
The special EM chip breaker series for soft steel, stainless steel and heat resistant super alloys.
The benefits of using SPMX inserts from ZCC-CT are:
- Sharp cutting edge with stronger edge line for medium cut even in interrupted cut.
- Sharp and strong cutting edge of semi-finishing of sticky steel and austentic stainless steel.
- ap· d.o.c. = 1~4(mm)
- f= 0.2~0.5(mm/r)
£7.88 excl. VAT
£9.46 incl. VAT
APKT Indexable Milling Insert for Finishing Grade YBC302 (ZCC-CT)
APKT-PF carbide milling insert
- Grade YBC302 is our best performing insert for milling steel
- CVD coated
- PF chipbreaker is designed for finishing
- APKT geometry insert
£8.21 excl. VAT
£9.85 incl. VAT
APKT Indexable Milling Insert for Finishing Grade YBM253 (ZCC-CT)
APKT-APF carbide milling insert
- Grade YBM253 is our best performing insert for milling stainless steel
- CVD coated
- APF chipbreaker is designed for finishing
- APKT geometry insert
£6.52 excl. VAT
£7.82 incl. VAT